osd-contiki/platform/osd-merkur/dev/hw-arduino.h
Ralf Schlatterbeck abdf6f8c6b Refactor A/D conversion in adc.c
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
2014-11-19 13:53:32 +01:00

84 lines
2.8 KiB
C

/*
* Copyright (c) 2014, Ralf Schlatterbeck Open Source Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \defgroup compatibility Arduino - Contiki
*
* This defines contiki-compatible hardware definitions for running
* arduino sketches (or just to call arduino-compatible function).
* For now only for osd hardware, a similar file should exist for each
* arduino-compatible hardware.
*
* @{
*/
/**
* \file
* Header file for arduino compatibility
* \author
* Ralf Schlatterbeck <rsc@runtux.com>
*
*/
#ifdef __cplusplus
extern "C"{
#endif
#include "contiki.h"
/*
* The OSD hardware only supports timer 3 for PWM, timer 2 is used by
* contiki for sleep/wakeup timing and is not usable for PWM.
*/
#define digitalPinToTimer(pin) \
( (pin) == 3 \
? TIMER3A \
: ( (pin) == 4 \
? TIMER3B \
: ((pin == 5) ? TIMER3C : NOT_ON_TIMER) \
) \
)
/* Only init timer 3 with phase correct pwm 8-bit and prescaler 64 */
#define arduino_pwm_timer_init() \
(hwtimer_ini (3, HWT_WGM_PWM_PHASE_8_BIT, HWT_CLOCK_PRESCALER_64, 0))
/*
* VI settings, see coding style
* ex:ts=8:et:sw=2
*/
#ifdef __cplusplus
} // extern "C"
#endif
/** @} */