151 lines
6.3 KiB
C
151 lines
6.3 KiB
C
/*
|
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
|
* to the MC1322x project (http://mc1322x.devl.org)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
|
* for details.
|
|
*
|
|
* $Id: gpio.h,v 1.2 2010/11/07 14:17:45 maralvira Exp $
|
|
*/
|
|
|
|
#ifndef GPIO_H
|
|
#define GPIO_H
|
|
|
|
/* Structure-based GPIO access
|
|
Example usage:
|
|
|
|
GPIO.FUNC_SEL0 |= 0x00008000; // set a whole register
|
|
|
|
GPIO.FUNC_SEL_08 = 2; // set just one pin
|
|
|
|
#define MY_PIN GPIO_08
|
|
GPIO.FUNC_SEL.MY_PIN = 2; // same, to allow #define for pin names
|
|
GPIO.DATA.MY_PIN = 1;
|
|
*/
|
|
|
|
#define _V(x,n,i) uint32_t x##_##i : n;
|
|
#define _REP(x,n) \
|
|
_V(x,n,00) _V(x,n,01) _V(x,n,02) _V(x,n,03) _V(x,n,04) _V(x,n,05) _V(x,n,06) _V(x,n,07) \
|
|
_V(x,n,08) _V(x,n,09) _V(x,n,10) _V(x,n,11) _V(x,n,12) _V(x,n,13) _V(x,n,14) _V(x,n,15) \
|
|
_V(x,n,16) _V(x,n,17) _V(x,n,18) _V(x,n,19) _V(x,n,20) _V(x,n,21) _V(x,n,22) _V(x,n,23) \
|
|
_V(x,n,24) _V(x,n,25) _V(x,n,26) _V(x,n,27) _V(x,n,28) _V(x,n,29) _V(x,n,30) _V(x,n,31) \
|
|
_V(x,n,32) _V(x,n,33) _V(x,n,34) _V(x,n,35) _V(x,n,36) _V(x,n,37) _V(x,n,38) _V(x,n,39) \
|
|
_V(x,n,40) _V(x,n,41) _V(x,n,42) _V(x,n,43) _V(x,n,44) _V(x,n,45) _V(x,n,46) _V(x,n,47) \
|
|
_V(x,n,48) _V(x,n,49) _V(x,n,50) _V(x,n,51) _V(x,n,52) _V(x,n,53) _V(x,n,54) _V(x,n,55) \
|
|
_V(x,n,56) _V(x,n,57) _V(x,n,58) _V(x,n,59) _V(x,n,60) _V(x,n,61) _V(x,n,62) _V(x,n,63)
|
|
|
|
struct GPIO_struct {
|
|
#define _IO(x) \
|
|
union { struct { uint32_t x##0; uint32_t x##1; }; \
|
|
struct { _REP(x, 1) }; \
|
|
struct { _REP(GPIO, 1) } x; };
|
|
#define _IO_2bit(x) \
|
|
union { struct { uint32_t x##0; uint32_t x##1; uint32_t x##2; uint32_t x##3; }; \
|
|
struct { _REP(x, 2) }; \
|
|
struct { _REP(GPIO, 2) } x; };
|
|
|
|
_IO(PAD_DIR);
|
|
_IO(DATA);
|
|
_IO(PAD_PU_EN);
|
|
_IO_2bit(FUNC_SEL);
|
|
_IO(DATA_SEL);
|
|
_IO(PAD_PU_SEL);
|
|
_IO(PAD_HYST_EN);
|
|
_IO(PAD_KEEP);
|
|
_IO(DATA_SET);
|
|
_IO(DATA_RESET);
|
|
_IO(PAD_DIR_SET);
|
|
_IO(PAD_DIR_RESET);
|
|
};
|
|
#undef _IO
|
|
#undef _IO_2bit
|
|
#undef _REP
|
|
#undef _V
|
|
|
|
static volatile struct GPIO_struct * const _GPIO = (void *) (0x80000000);
|
|
#define GPIO (*_GPIO)
|
|
|
|
|
|
/* Old register definitions, for compatibility */
|
|
#ifndef REG_NO_COMPAT
|
|
|
|
#define GPIO_PAD_DIR0 ((volatile uint32_t *) 0x80000000)
|
|
#define GPIO_PAD_DIR1 ((volatile uint32_t *) 0x80000004)
|
|
#define GPIO_DATA0 ((volatile uint32_t *) 0x80000008)
|
|
#define GPIO_DATA1 ((volatile uint32_t *) 0x8000000c)
|
|
#define GPIO_PAD_PU_EN0 ((volatile uint32_t *) 0x80000010)
|
|
#define GPIO_PAD_PU_EN1 ((volatile uint32_t *) 0x80000014)
|
|
#define GPIO_FUNC_SEL0 ((volatile uint32_t *) 0x80000018) /* GPIO 15 - 0; 2 bit blocks */
|
|
#define GPIO_FUNC_SEL1 ((volatile uint32_t *) 0x8000001c) /* GPIO 16 - 31; 2 bit blocks */
|
|
#define GPIO_FUNC_SEL2 ((volatile uint32_t *) 0x80000020) /* GPIO 32 - 47; 2 bit blocks */
|
|
#define GPIO_FUNC_SEL3 ((volatile uint32_t *) 0x80000024) /* GPIO 48 - 63; 2 bit blocks */
|
|
#define GPIO_DATA_SEL0 ((volatile uint32_t *) 0x80000028)
|
|
#define GPIO_DATA_SEL1 ((volatile uint32_t *) 0x8000002c)
|
|
#define GPIO_PAD_PU_SEL0 ((volatile uint32_t *) 0x80000030)
|
|
#define GPIO_PAD_PU_SEL1 ((volatile uint32_t *) 0x80000034)
|
|
|
|
#define GPIO_DATA_SET0 ((volatile uint32_t *) 0x80000048)
|
|
#define GPIO_DATA_SET1 ((volatile uint32_t *) 0x8000004c)
|
|
#define GPIO_DATA_RESET0 ((volatile uint32_t *) 0x80000050)
|
|
#define GPIO_DATA_RESET1 ((volatile uint32_t *) 0x80000054)
|
|
#define GPIO_PAD_DIR_SET0 ((volatile uint32_t *) 0x80000058)
|
|
#define GPIO_PAD_DIR_SET1 ((volatile uint32_t *) 0x8000005c)
|
|
#define GPIO_PAD_DIR_RESET0 ((volatile uint32_t *) 0x80000060)
|
|
#define GPIO_PAD_DIR_RESET1 ((volatile uint32_t *) 0x80000064)
|
|
|
|
inline void gpio_pad_dir(volatile uint64_t data);
|
|
inline void gpio_data(volatile uint64_t data);
|
|
inline uint64_t gpio_data_get(volatile uint64_t bits);
|
|
inline void gpio_pad_pu_en(volatile uint64_t data);
|
|
inline void gpio_data_sel(volatile uint64_t data);
|
|
inline void gpio_data_pu_sel(volatile uint64_t data);
|
|
inline void gpio_data_set(volatile uint64_t data);
|
|
inline void gpio_data_reset(volatile uint64_t data);
|
|
inline void gpio_pad_dir_set(volatile uint64_t data);
|
|
inline void gpio_pad_dir_reset(volatile uint64_t data);
|
|
|
|
/* select pullup or pulldown for GPIO 0-31 (b=0-31) */
|
|
#define gpio_sel0_pullup(b) (set_bit(*GPIO_PAD_PU_SEL0,b))
|
|
#define gpio_sel0_pulldown(b) (clear_bit(*GPIO_PAD_PU_SEL0,b))
|
|
|
|
/* select pullup or pulldown for GPIO 32-63 (b=32-63) */
|
|
#define gpio_sel1_pullup(b) (set_bit(*GPIO_PAD_PU_SEL1,b-32))
|
|
#define gpio_sel1_pulldown(b) (clear_bit(*GPIO_PAD_PU_SEL1,b-32))
|
|
|
|
/* enable/disable pullup for GPIO 0-31 (b=0-31) */
|
|
#define gpio_pu0_enable(b) (set_bit(*GPIO_PAD_PU_EN0,b))
|
|
#define gpio_pu0_disable(b) (clear_bit(*GPIO_PAD_PU_EN0,b))
|
|
|
|
/* enable/disable pullup for GPIO 32-63 (b=32-63) */
|
|
#define gpio_pu1_enable(b) (set_bit(*GPIO_PAD_PU_EN1,b-32))
|
|
#define gpio_pu1_disable(b) (clear_bit(*GPIO_PAD_PU_EN1,b-32))
|
|
|
|
#endif /* REG_NO_COMPAT */
|
|
|
|
#endif
|