osd-contiki/platform/eval-adf7xxxmb4z/contiki-main.c

259 lines
7.3 KiB
C

/*
* Copyright (c) 2014, Analog Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \author Ian Martin <martini@redwirellc.com>
*/
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include "contiki.h"
#include "net/netstack.h"
#include "dev/serial-line.h"
#include "net/ip/uip.h"
#include "dev/button-sensor.h"
#if NETSTACK_CONF_WITH_IPV6
#include "net/ipv6/uip-ds6.h"
#endif /* NETSTACK_CONF_WITH_IPV6 */
#include "net/rime/rime.h"
#include "uart0.h"
#include "contiki-uart.h"
#include "watchdog.h"
#include "slip-arch.h"
#if __GNUC__
#include "write.h"
#endif
SENSORS(&button_sensor);
#ifndef SERIAL_ID
#define SERIAL_ID { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 }
#endif
static uint8_t serial_id[] = SERIAL_ID;
static uint16_t node_id = 0x0102;
/*---------------------------------------------------------------------------*/
static void
set_rime_addr(void)
{
linkaddr_t addr;
int i;
memset(&addr, 0, sizeof(linkaddr_t));
#if NETSTACK_CONF_WITH_IPV6
memcpy(addr.u8, serial_id, sizeof(addr.u8));
#else
if(node_id == 0) {
for(i = 0; i < sizeof(linkaddr_t); ++i) {
addr.u8[i] = serial_id[7 - i];
}
} else {
addr.u8[0] = node_id & 0xff;
addr.u8[1] = node_id >> 8;
}
#endif
linkaddr_set_node_addr(&addr);
printf("Rime started with address ");
for(i = 0; i < sizeof(addr.u8) - 1; i++) {
printf("%d.", addr.u8[i]);
}
printf("%d" NEWLINE, addr.u8[i]);
}
/*---------------------------------------------------------------------------*/
int contiki_argc = 0;
char **contiki_argv;
static void
delay_1sec(void)
{
/* Delay 1 second */
register unsigned long int i;
for(i = 0x000FFFFFUL; i; --i) {
asm ("nop");
}
}
int
main(int argc, char **argv)
{
bool flip_flop = false;
asm ("di");
/* Setup clocks */
CMC = 0x11U; /* Enable XT1, disable X1 */
CSC = 0x80U; /* Start XT1 and HOCO, stop X1 */
CKC = 0x00U;
delay_1sec();
OSMC = 0x00; /* Supply fsub to peripherals, including Interval Timer */
uart0_init();
#if __GNUC__
/* Force linking of custom write() function: */
write(1, NULL, 0);
#endif
/* Setup 12-bit interval timer */
RTCEN = 1; /* Enable 12-bit interval timer and RTC */
ITMK = 1; /* Disable IT interrupt */
ITPR0 = 0; /* Set interrupt priority - highest */
ITPR1 = 0;
ITMC = 0x8FFFU; /* Set maximum period 4096/32768Hz = 1/8 s, and start timer */
ITIF = 0; /* Clear interrupt request flag */
ITMK = 0; /* Enable IT interrupt */
/* asm ("ei"); / * Enable interrupts * / */
/* Disable analog inputs because they can conflict with the SPI buses: */
ADPC = 0x01; /* Configure all analog pins as digital I/O. */
PMC0 &= 0xF0; /* Disable analog inputs. */
clock_init();
/* Initialize Joystick Inputs: */
PM5 |= BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1); /* Set pins as inputs. */
PU5 |= BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1); /* Enable internal pull-up resistors. */
/* Initialize LED outputs: */
#define BIT(n) (1 << (n))
PM12 &= ~BIT(0); /* LED1 */
PM4 &= ~BIT(3); /* LED2 */
PM1 &= ~BIT(6); /* LED3 */
PM1 &= ~BIT(5); /* LED4 */
PM0 &= ~BIT(6); /* LED5 */
PM0 &= ~BIT(5); /* LED6 */
PM3 &= ~BIT(0); /* LED7 */
PM5 &= ~BIT(0); /* LED8 */
#if NETSTACK_CONF_WITH_IPV6
#if UIP_CONF_IPV6_RPL
printf(CONTIKI_VERSION_STRING " started with IPV6, RPL" NEWLINE);
#else
printf(CONTIKI_VERSION_STRING " started with IPV6" NEWLINE);
#endif
#else
printf(CONTIKI_VERSION_STRING " started" NEWLINE);
#endif
/* crappy way of remembering and accessing argc/v */
contiki_argc = argc;
contiki_argv = argv;
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
queuebuf_init();
netstack_init();
printf("MAC %s RDC %s NETWORK %s" NEWLINE, NETSTACK_MAC.name, NETSTACK_RDC.name, NETSTACK_NETWORK.name);
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, serial_id, sizeof(uip_lladdr.addr));
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
/* make it hardcoded... */
lladdr->state = ADDR_AUTOCONF;
printf("%02x%02x" NEWLINE, lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
#elif NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
#endif
serial_line_init();
autostart_start(autostart_processes);
while(1) {
watchdog_periodic();
if(NETSTACK_RADIO.pending_packet()) {
int len;
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
while(uart0_can_getchar()) {
char c;
UART_RX_LED = 1;
c = uart0_getchar();
if(uart0_input_handler) {
uart0_input_handler(c);
}
}
UART_RX_LED = 0;
process_run();
etimer_request_poll();
HEARTBEAT_LED1 = flip_flop;
flip_flop = !flip_flop;
HEARTBEAT_LED2 = flip_flop;
}
return 0;
}
/*---------------------------------------------------------------------------*/
void
log_message(char *m1, char *m2)
{
printf("%s%s" NEWLINE, m1, m2);
}
/*---------------------------------------------------------------------------*/
void
uip_log(char *m)
{
printf("%s" NEWLINE, m);
}
/*---------------------------------------------------------------------------*/