osd-contiki/platform/mb851/contiki-conf.h
Adam Dunkels a5046e83c7 Cleanup and refactoring of the STM32w port
This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.
2013-03-18 13:31:26 +01:00

172 lines
6 KiB
C

/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* contiki-conf.h for MB851.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
* Chi-Anh La <la@imag.fr>
* Simon Duquennoy <simonduq@sics.se>
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#ifdef PLATFORM_CONF_H
#include PLATFORM_CONF_H
#else
#include "platform-conf.h"
#endif /* PLATFORM_CONF_H */
/* Radio and 802.15.4 params */
/* 802.15.4 radio channel */
#define RF_CHANNEL 26
/* 802.15.4 PAN ID */
#define IEEE802154_CONF_PANID 0xabcd
/* Use EID 64, enable hardware autoack and address filtering */
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_LL_802154 1
#define ST_CONF_RADIO_AUTOACK 1
/* Number of buffers for incoming frames */
#define RADIO_RXBUFS 2
/* Set to 0 for non ethernet links */
#define UIP_CONF_LLH_LEN 0
/* RDC params */
/* TX routine passes the cca/ack result in the return parameter */
#define RDC_CONF_HARDWARE_ACK 1
/* TX routine does automatic cca and optional backoff */
#define RDC_CONF_HARDWARE_CSMA 0
/* RDC debug with LED */
#define RDC_CONF_DEBUG_LED 0
/* Channel check rate (per second) */
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
/* Use ACK for optimization (LPP, XMAC) */
#define WITH_ACK_OPTIMIZATION 0
/* Netstack config */
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC contikimac_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO stm32w_radio_driver
/* ContikiMAC config */
#define CONTIKIMAC_CONF_COMPOWER 0
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0
#define CONTIKIMAC_CONF_ANNOUNCEMENTS 0
#define CONTIKIMAC_CONF_WITH_PHASE_OPTIMIZATION 0
/* CXMAC config */
#define CXMAC_CONF_ANNOUNCEMENTS 0
#define CXMAC_CONF_COMPOWER 1
/* XMAC config */
#define XMAC_CONF_ANNOUNCEMENTS 0
#define XMAC_CONF_COMPOWER 1
/* Other (RAM saving) */
#define ENERGEST_CONF_ON 0
#define QUEUEBUF_CONF_NUM 2
#define QUEUEBUF_CONF_REF_NUM 0
#define UIP_CONF_DS6_NBR_NBU 4
#define UIP_CONF_MAX_ROUTES 4
#define RPL_CONF_MAX_PARENTS_PER_DAG 4
#define RPL_CONF_MAX_INSTANCES 1
#define RPL_CONF_MAX_DAG_PER_INSTANCE 1
#define PROCESS_CONF_NUMEVENTS 16
#if WITH_UIP6
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
/*
* Specify a minimum packet size for 6lowpan compression to be
* enabled. This is needed for ContikiMAC, which needs packets to be
* larger than a specified size, if no ContikiMAC header should
* be used.
*/
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD 63
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER 0
#define UIP_CONF_ROUTER 1
#define UIP_CONF_IPV6_RPL 1
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_BUFFER_SIZE 140
#define UIP_CONF_IPV6 1
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_ND6_MAX_PREFIXES 2
#define UIP_CONF_ND6_MAX_NEIGHBORS 2
#define UIP_CONF_ND6_MAX_DEFROUTERS 1
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 8
#define UIP_CONF_UDP_CONNS 4
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 1
#endif /* SICSLOWPAN_CONF_FRAG */
#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#endif /* SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS */
#ifndef SICSLOWPAN_CONF_MAXAGE
#define SICSLOWPAN_CONF_MAXAGE 2
#endif /* SICSLOWPAN_CONF_MAXAGE */
#else /* WITH_UIP6 */
/* Network setup for non-IPv6 (rime). */
#define NETSTACK_CONF_NETWORK rime_driver
#endif /* WITH_UIP6 */
#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */
#ifdef PLATFORM_CONF
#include PLATFORM_CONF
#endif /* PLATFORM_CONF */
#endif /* __CONTIKI_CONF_H__ */
/** @} */