246 lines
7.5 KiB
Text
246 lines
7.5 KiB
Text
|
|
CONTIKI_TARGET_DIRS = .
|
|
|
|
ifeq ($(BOARD),)
|
|
BOARD=ids01a4
|
|
${info ***************************************************}
|
|
${info BOARD not specified, default to ids01a4 (868 MHz)!}
|
|
${info ***************************************************}
|
|
else ifeq ($(BOARD),ids01a4)
|
|
${info ***************************************************}
|
|
${info Using ids01a4 SPIRIT1 expansion board (868 MHz)}
|
|
${info ***************************************************}
|
|
else ifeq ($(BOARD),ids01a5)
|
|
${info ***************************************************}
|
|
${info Using ids01a5 SPIRIT1 expansion board (915 MHz)}
|
|
${info ***************************************************}
|
|
else
|
|
${info ***************************************************}
|
|
${info You must specify a valid SPIRIT1 board to use:}
|
|
${info make BOARD=ids01a4 for X-NUCLEO-IDS01A4 (868 MHz)}
|
|
${info make BOARD=ids01a5 for X-NUCLEO-IDS01A5 (915 MHz)}
|
|
${info ***************************************************}
|
|
${error }
|
|
endif
|
|
|
|
### Include the board-specific makefile
|
|
PLATFORM_ROOT_DIR = $(CONTIKI)/platform/$(TARGET)
|
|
-include $(PLATFORM_ROOT_DIR)/Makefile.$(BOARD)
|
|
|
|
ifeq ($(SENSORBOARD),iks01a1)
|
|
${info Compiling with X-NUCLEO-IKS01A1 sensors files}
|
|
${info ***************************************************}
|
|
-include $(PLATFORM_ROOT_DIR)/Makefile.$(SENSORBOARD)
|
|
else ifeq ($(SENSORBOARD),)
|
|
${info NOT compiling files for any sensors expansion board}
|
|
${info ***************************************************}
|
|
else
|
|
${info Error: SENSORBOARD can be: iks01a1}
|
|
${info ***************************************************}
|
|
${error }
|
|
endif
|
|
|
|
|
|
|
|
#Currently we support only GCC
|
|
GCC=1
|
|
|
|
CONTIKI_TARGET_DIRS += dev
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/stm32cube-prj/Src
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/stm32l1xx_nucleo
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/x_nucleo_ids01ax
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/Common
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/spirit1/src stm32cube-lib/drivers/spirit1/inc
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/CMSIS
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Src
|
|
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Inc
|
|
|
|
|
|
ARCH_DEV = button-sensor.c leds-arch.c radio-sensor.c
|
|
|
|
ARCH_NUCLEOSPIRIT1 = contiki-spirit1-main.c uart-msg.c spirit1-arch.c spirit1.c node-id.c
|
|
|
|
ARCH_NUCLEOSPIRIT1_STM32CUBEHAL = spirit1_appli.c stm32l1xx_hal_msp.c stm32l1xx_it.c stm32cube_hal_init.c
|
|
|
|
ARCH_DRIVERS_STM32L1xx = stm32l1xx_nucleo.c
|
|
|
|
ARCH_DRIVERS_IDS01AX = radio_gpio.c radio_shield_config.c radio_spi.c
|
|
|
|
ARCH_DRIVERS_SPIRIT1 = \
|
|
SPIRIT1_Util.c \
|
|
SPIRIT_Aes.c \
|
|
SPIRIT_Calibration.c \
|
|
SPIRIT_Commands.c \
|
|
SPIRIT_Csma.c \
|
|
SPIRIT_DirectRF.c \
|
|
SPIRIT_General.c \
|
|
SPIRIT_Gpio.c \
|
|
SPIRIT_Irq.c \
|
|
SPIRIT_LinearFifo.c \
|
|
SPIRIT_Management.c \
|
|
SPIRIT_PktBasic.c \
|
|
SPIRIT_PktCommon.c \
|
|
SPIRIT_PktMbus.c \
|
|
SPIRIT_PktStack.c \
|
|
SPIRIT_Qi.c \
|
|
SPIRIT_Radio.c \
|
|
SPIRIT_Timer.c \
|
|
SPIRIT_Types.c
|
|
|
|
STM32L1XX_HAL =\
|
|
stm32l1xx_hal.c\
|
|
stm32l1xx_hal_adc_ex.c\
|
|
stm32l1xx_hal_adc.c\
|
|
stm32l1xx_hal_comp.c\
|
|
stm32l1xx_hal_cortex.c\
|
|
stm32l1xx_hal_crc.c\
|
|
stm32l1xx_hal_cryp_ex.c\
|
|
stm32l1xx_hal_cryp.c\
|
|
stm32l1xx_hal_dac_ex.c\
|
|
stm32l1xx_hal_dac.c\
|
|
stm32l1xx_hal_dma.c\
|
|
stm32l1xx_hal_flash_ex.c\
|
|
stm32l1xx_hal_flash.c\
|
|
stm32l1xx_hal_flash_ramfunc.c\
|
|
stm32l1xx_hal_gpio.c\
|
|
stm32l1xx_hal_i2c.c\
|
|
stm32l1xx_hal_i2s.c\
|
|
stm32l1xx_hal_irda.c\
|
|
stm32l1xx_hal_iwdg.c\
|
|
stm32l1xx_hal_lcd.c\
|
|
stm32l1xx_hal_nor.c\
|
|
stm32l1xx_hal_opamp_ex.c\
|
|
stm32l1xx_hal_opamp.c\
|
|
stm32l1xx_hal_pcd_ex.c\
|
|
stm32l1xx_hal_pcd.c\
|
|
stm32l1xx_hal_pwr_ex.c\
|
|
stm32l1xx_hal_pwr.c\
|
|
stm32l1xx_hal_rcc_ex.c\
|
|
stm32l1xx_hal_rcc.c\
|
|
stm32l1xx_hal_rtc_ex.c\
|
|
stm32l1xx_hal_rtc.c\
|
|
stm32l1xx_hal_sd.c\
|
|
stm32l1xx_hal_smartcard.c\
|
|
stm32l1xx_hal_spi_ex.c\
|
|
stm32l1xx_hal_spi.c\
|
|
stm32l1xx_hal_sram.c\
|
|
stm32l1xx_hal_tim_ex.c\
|
|
stm32l1xx_hal_tim.c\
|
|
stm32l1xx_hal_uart.c\
|
|
stm32l1xx_hal_usart.c\
|
|
stm32l1xx_hal_wwdg.c\
|
|
stm32l1xx_ll_fsmc.c\
|
|
stm32l1xx_ll_sdmmc.c
|
|
|
|
ARCH+=$(ARCH_DEV)
|
|
ARCH+=$(ARCH_NUCLEOSPIRIT1)
|
|
ARCH+=$(ARCH_NUCLEOSPIRIT1_STM32CUBEHAL)
|
|
ARCH+=$(ARCH_DRIVERS_STM32L1xx)
|
|
ARCH+=$(ARCH_DRIVERS_IDS01AX)
|
|
ARCH+=$(ARCH_DRIVERS_SPIRIT1)
|
|
ARCH+=$(STM32L1XX_HAL)
|
|
|
|
CFLAGS += -DUSE_STM32L152_EVAL \
|
|
-DSTM32L152xE \
|
|
-DUSE_STM32L1XX_NUCLEO \
|
|
-DUSE_HAL_DRIVER \
|
|
-DUSE_STDPERIPH_DRIVER \
|
|
-DNO_EEPROM \
|
|
-DSPIRIT1_ST_SHIELD \
|
|
-DSPIRIT_MODULE \
|
|
-DUSE_SPIRIT1_DEFAULT
|
|
|
|
CFLAGS += -I. \
|
|
-I$(CONTIKI)/platform/$(TARGET)/ \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/stm32cube-prj/Inc \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/Common \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/spirit1/inc \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/CMSIS \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Inc \
|
|
-I$(CONTIKI)/cpu/arm/stm32l152 \
|
|
-I$(CONTIKI)/core \
|
|
-I$(CONTIKI)/platform/$(TARGET)/dev
|
|
|
|
ifdef UIP_CONF_IPV6
|
|
CFLAGS += -DWITH_UIP6=1
|
|
endif
|
|
|
|
|
|
ifndef CONTIKI_TARGET_MAIN
|
|
CONTIKI_TARGET_MAIN = contiki-spirit1-main.c
|
|
endif
|
|
|
|
CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(CONTIKI_TARGET_MAIN)
|
|
|
|
MCU=stm32l152
|
|
CONTIKI_CPU=$(CONTIKI)/cpu/arm/stm32l152
|
|
include $(CONTIKI)/cpu/arm/stm32l152/Makefile.stm32l152
|
|
|
|
|
|
MODULES+=core/net \
|
|
core/net/mac core/net/mac/contikimac \
|
|
core/net/llsec
|
|
|
|
|
|
# build rules ------------------------------------
|
|
|
|
CLEAN += *.stm32nucleo-spirit1 symbols.c symbols.h contiki-stm32nucleo-spirit1.log
|
|
|
|
contiki-$(TARGET).a: ${addprefix $(OBJECTDIR)/,symbols.o}
|
|
|
|
help:
|
|
@echo A few useful make commands:
|
|
@echo make help - shows this help
|
|
@echo make TARGET=stm32nucleo-spirit1 savetarget - stores selection of target to avoid using TARGET= on every make invokation
|
|
@echo make program.upload - compiles and uploads program to connected board
|
|
@echo make program.upload IAR=1 - uses the IAR compiler instead of gcc (not implemented yet)
|
|
@echo make program.upload NODEID=x - uploads with node_id set to x
|
|
|
|
# Serialdump rules
|
|
ifeq ($(HOST_OS),Windows)
|
|
SERIALDUMP = serialdump-windows
|
|
# this ID is a string with which the node identifies itself as, and is used to
|
|
# find the proper /dev/comX-port in Cygwin to connect to.
|
|
CYGWIN_DEV_ID="stm32nucleo-spirit1 Spirit1 Platform"
|
|
# include $(CONTIKI)/tools/cygwin/Makefile.cygwin
|
|
endif
|
|
ifeq ($(HOST_OS),Darwin)
|
|
SERIALDUMP = serialdump-macos
|
|
endif
|
|
ifndef SERIALDUMP
|
|
# Assume Linux
|
|
SERIALDUMP = serialdump-linux
|
|
endif
|
|
|
|
# IAR/windows/cygwin only for now; after GCC port, see if stm32flash works with Linux
|
|
STLINKCLI=ST-LINK_CLI.exe
|
|
%.upload: %.hex
|
|
#Note: this command only uploads to a single connected device
|
|
#$(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME
|
|
$(STLINKCLI) -Q -P $*.hex -V -Run
|
|
|
|
|
|
# devcon requires WinDriverKit, downloadable from microsoft.com
|
|
DEVCON=devcon.exe
|
|
DEVCON_ALLDEVS=$(shell $(DEVCON) find =USB | grep "STMicroelectronics STLink dongle" | cut -d " " -f 1)
|
|
devcon_enableonly:
|
|
devcon disable =USB @"USB\VID_0483&PID_3748\*"
|
|
devcon enable =USB @"$(ID)"
|
|
|
|
%.uploadall: %.hex
|
|
$(foreach D,$(DEVCON_ALLDEVS), echo D IS "$(D)" && make devcon_enableonly ID="$(D)" && make $*.upload && ) echo "Done"
|
|
devcon enable =USB @"USB\VID_0483&PID_3748\*"
|
|
|
|
login:
|
|
@echo "Connecting to $(COMPORT)"
|
|
$(CONTIKI)/tools/sky/$(SERIALDUMP) -b115200 $(COMPORT)
|
|
|
|
%.ramusage: %.$(TARGET)
|
|
$(NM) -S $< --size-sort --line-numbers | grep -v " T " | grep -v " t "
|
|
%.romusage: %.$(TARGET)
|
|
$(NM) -S $< --size-sort --line-numbers | grep -v " b " | grep -v " B " | grep -v " d " | grep -v " D "
|
|
|
|
|
|
|
|
|