osd-contiki/cpu/stm32w108/hal/micro/led.h
Adam Dunkels a5046e83c7 Cleanup and refactoring of the STM32w port
This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.
2013-03-18 13:31:26 +01:00

59 lines
1.6 KiB
C

/** @file hal/micro/led.h
* @brief Header for led APIs
*
* <!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
*/
/** @addtogroup led
* @brief Sample API funtions for controlling LEDs.
*
* When specifying an LED to use, always use the BOARDLEDx definitions that
* are defined within the BOARD_HEADER.
*
* See led.h for source code.
*@{
*/
/** @brief Configures GPIOs pertaining to the control of LEDs.
*/
void halInitLed(void);
/** @brief Ensures that the definitions from the BOARD_HEADER
* are always used as parameters to the LED functions.
*/
typedef uint8_t HalBoardLed;
// Note: Even though many compilers will use 16 bits for an enum instead of 8,
// we choose to use an enum here. The possible compiler inefficiency does not
// affect stack-based parameters and local variables, which is the
// general case for led paramters.
/** @brief Atomically wraps an XOR or similar operation for a single GPIO
* pin attached to an LED.
*
* @param led Identifier (from BOARD_HEADER) for the LED to be toggled.
*/
void halToggleLed(HalBoardLed led);
/** @brief Turns on (sets) a GPIO pin connected to an LED so that the LED
* turns on.
*
* @param led Identifier (from BOARD_HEADER) for the LED to turn on.
*/
void halSetLed(HalBoardLed led);
/** @brief Turns off (clears) a GPIO pin connected to an LED, which turns
* off the LED.
*
* @param led Identifier (from BOARD_HEADER) for the LED to turn off.
*/
void halClearLed(HalBoardLed led);
#ifdef CORTEXM3_STM32F103
#include "micro/cortexm3/stm32f103ret/led-specific.h"
#endif
/** @} // END addtogroup
*/