osd-contiki/cpu/avr/dev/usb/rndis/rndis_task.c
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00

437 lines
11 KiB
C

/* This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file rndis_task.c *********************************************************
*
* \brief
* Manages the RNDIS Dataclass for the USB Device
*
* \addtogroup usbstick
*
* \author
* Colin O'Flynn <coflynn@newae.com>
*
******************************************************************************/
/* Copyright (c) 2008 ATMEL Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
/**
\addtogroup RNDIS
@{
*/
//_____ I N C L U D E S ___________________________________________________
#include "contiki.h"
#include "usb_drv.h"
#include "usb_descriptors.h"
#include "usb_specific_request.h"
#include "rndis/rndis_task.h"
#include "rndis/rndis_protocol.h"
#include "uip.h"
#include "sicslow_ethernet.h"
#include <stdio.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#define BUF ((struct uip_eth_hdr *)&uip_buf[0])
#define PRINTF printf
#define PRINTF_P printf_P
//_____ M A C R O S ________________________________________________________
//_____ D E F I N I T I O N S ______________________________________________
#define IAD_TIMEOUT_DETACH 400
#define IAD_TIMEOUT_ATTACH 800
#define RNDIS_TIMEOUT_DETACH 900
#define RNDIS_TIMEOUT_ATTACH 1000
#define PBUF ((rndis_data_packet_t *) data_buffer)
//_____ D E C L A R A T I O N S ____________________________________________
//! Timers for LEDs
uint8_t led1_timer, led2_timer;
//! Temp data buffer when adding RNDIS headers
uint8_t data_buffer[64];
//! Usb is busy with RNDIS
char usb_busy = 0;
static struct etimer et;
static struct timer flood_timer;
static uint16_t iad_fail_timeout, rndis_fail_timeout;
static uint8_t doInit = 1;
extern uint8_t fingerPresent;
PROCESS(rndis_process, "RNDIS process");
/**
* \brief RNDIS Process
*
* This is the link between USB and the "good stuff". In this routine data
* is received and processed by RNDIS
*/
PROCESS_THREAD(rndis_process, ev, data_proc)
{
PROCESS_BEGIN();
uint8_t bytecounter, headercounter;
uint16_t i, dataoffset;
clock_time_t timediff;
clock_time_t thetime;
while(1) {
// turn off LED's if necessary
if (led1_timer) led1_timer--;
else Led1_off();
if (led2_timer) led2_timer--;
else Led2_off();
/* Device is Enumerated but RNDIS not loading. We might
have a system that does not support IAD (winXP). If so
count the timeout then switch to just network interface. */
#if 0
if (usb_mode == rndis_debug) {
//If we have timed out, detach
if (iad_fail_timeout == IAD_TIMEOUT_DETACH) {
//Failed - BUT we are using "reverse logic", hence we force device
//into this mode. This is used to allow Windows Vista have time to
//install the drivers
if (fingerPresent && (rndis_state != rndis_data_initialized) && Is_device_enumerated() ) {
iad_fail_timeout = 0;
} else {
stdout = NULL;
Usb_detach();
doInit = 1; //Also mark system as needing intilizing
}
//Then wait a few before re-attaching
} else if (iad_fail_timeout == IAD_TIMEOUT_ATTACH) {
if (fingerPresent) {
usb_mode = mass_storage;
} else {
usb_mode = rndis_only;
}
Usb_attach();
}
//Increment timeout when device is not initializing, OR we have already detached,
//OR the user had their finger on the device, indicating a reverse of logic
if ( ( (rndis_state != rndis_data_initialized) && Is_device_enumerated() ) ||
(iad_fail_timeout > IAD_TIMEOUT_DETACH) ||
(fingerPresent) ) {
iad_fail_timeout++;
} else {
iad_fail_timeout = 0;
}
} //usb_mode == rndis_debug
/* Device is Enumerated but RNDIS STIL not loading. We just
have RNDIS interface, so obviously no drivers on target.
Just go ahead and mount ourselves as mass storage... */
if (usb_mode == rndis_only) {
//If we have timed out, detach
if (rndis_fail_timeout == RNDIS_TIMEOUT_DETACH) {
Usb_detach();
//Then wait a few before re-attaching
} else if (rndis_fail_timeout == RNDIS_TIMEOUT_ATTACH) {
usb_mode = mass_storage;
Usb_attach();
}
//Increment timeout when device is not initializing, OR we are already
//counting to detach
if ( ( (rndis_state != rndis_data_initialized)) ||
(rndis_fail_timeout > RNDIS_TIMEOUT_DETACH) ) {
rndis_fail_timeout++;
} else {
rndis_fail_timeout = 0;
}
}//usb_mode == rnids_only
#endif
if(rndis_state == rndis_data_initialized) //Enumeration processs OK ?
{
if (doInit) {
//start flood timer
timer_set(&flood_timer, CLOCK_SECOND / 5);
mac_ethernetSetup();
doInit = 0;
}
//Connected!
Led0_on();
Usb_select_endpoint(RX_EP);
//If we have data and a free buffer
if(Is_usb_receive_out() && (uip_len == 0)) {
//TODO: Fix this some better way
//If you need a delay in RNDIS to slow down super-fast sending, insert it here
//Also mark the USB as "in use"
//This is done as "flood control" by only allowing one IP packet per time limit
thetime = clock_time();
timediff = thetime - flood_timer.start;
//Oops, timer wrapped! Just ignore it for now
if (thetime < flood_timer.start) {
timediff = flood_timer.interval;
}
//If timer not yet expired
//if (timediff < flood_timer.interval) {
if (!timer_expired(&flood_timer)) {
//Wait until timer expiers
usb_busy = 1;
etimer_set(&et, flood_timer.interval - timediff);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
//Reselect endpoint in case we lost it
Usb_select_endpoint(RX_EP);
usb_busy = 0;
}
//Restart flood timer
timer_restart(&flood_timer);
//Read how much (endpoint only stores up to 64 bytes anyway)
bytecounter = Usb_byte_counter_8();
//Try and read the header in
headercounter = sizeof(rndis_data_packet_t);
uint8_t fail = 0;
//Hmm.. what's going on here
if (bytecounter < headercounter) {
Usb_ack_receive_out();
fail = 1;
}
i = 0;
while (headercounter) {
data_buffer[i] = Usb_read_byte();
bytecounter--;
headercounter--;
i++;
}
//This is no good. Probably lost syncronization... just drop it for now
if(PBUF->MessageType != REMOTE_NDIS_PACKET_MSG) {
Usb_ack_receive_out();
fail = 1;
}
//802.3 does not have OOB data, and we don't care about per-packet data
//so that just leave regular packet data...
if (PBUF->DataLength && (fail == 0)) {
//Looks like we've got a live one
rx_start_led();
//Get offset
dataoffset = PBUF->DataOffset;
//Make it offset from start of message, not DataOffset field
dataoffset += (sizeof(rndis_MessageType_t) + sizeof(rndis_MessageLength_t));
//Subtract what we already took
dataoffset -= sizeof(rndis_data_packet_t);
//Read to the start of data
while(dataoffset) {
Usb_read_byte();
dataoffset--;
bytecounter--;
//If endpoint is done
if (bytecounter == 0) {
Usb_ack_receive_out();
//Wait for new data
while (!Is_usb_receive_out());
bytecounter = Usb_byte_counter_8();
}
}
//Read the data itself in
uint8_t * uipdata = uip_buf;
uint16_t datalen = PBUF->DataLength;
while(datalen) {
*uipdata++ = Usb_read_byte();
datalen--;
bytecounter--;
//If endpoint is done
if (bytecounter == 0) {
//Might be everything we need!
if (datalen) {
Usb_ack_receive_out();
//Wait for new data
while (!Is_usb_receive_out());
bytecounter = Usb_byte_counter_8();
}
}
}
//Ack final data packet
Usb_ack_receive_out();
//Send data over RF or to local stack
uip_len = PBUF->DataLength; //uip_len includes LLH_LEN
mac_ethernetToLowpan(uip_buf);
} //if (PBUF->DataLength)
} //if(Is_usb_receive_out() && (uip_len == 0))
} // if (rndis_data_intialized)
if ((usb_mode == rndis_only) || (usb_mode == rndis_debug)) {
etimer_set(&et, CLOCK_SECOND/80);
} else {
etimer_set(&et, CLOCK_SECOND);
}
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
} // while(1)
PROCESS_END();
}
/**
\brief Send data over RNDIS interface, data is in uipbuf and length is uiplen
*/
uint8_t rndis_send(uint8_t * senddata, uint16_t sendlen, uint8_t led)
{
uint16_t i;
//Setup Header
PBUF->MessageType = REMOTE_NDIS_PACKET_MSG;
PBUF->DataOffset = sizeof(rndis_data_packet_t) - sizeof(rndis_MessageType_t) - sizeof(rndis_MessageLength_t);
PBUF->DataLength = sendlen;
PBUF->OOBDataLength = 0;
PBUF->OOBDataOffset = 0;
PBUF->NumOOBDataElements = 0;
PBUF->PerPacketInfoOffset = 0;
PBUF->PerPacketInfoLength = 0;
PBUF->DeviceVcHandle = 0;
PBUF->Reserved = 0;
PBUF->MessageLength = sizeof(rndis_data_packet_t) + PBUF->DataLength;
//Send Data
Usb_select_endpoint(TX_EP);
Usb_send_in();
//Wait for ready
while(!Is_usb_write_enabled());
//Setup first part of transfer...
for(i = 0; i < sizeof(rndis_data_packet_t); i++) {
Usb_write_byte(data_buffer[i]);
}
//Send packet
while(sendlen) {
Usb_write_byte(*senddata);
senddata++;
sendlen--;
//If endpoint is full, send data in
//And then wait for data to transfer
if (!Is_usb_write_enabled()) {
Usb_send_in();
while(!Is_usb_write_enabled());
}
if (led) {
tx_end_led();
}
}
Usb_send_in();
return 1;
}
/**
@brief This will enable the RX_START LED for a period
*/
void rx_start_led(void)
{
Led1_on();
led1_timer = 10;
}
/**
@brief This will enable the TRX_END LED for a period
*/
void tx_end_led(void)
{
Led2_on();
led2_timer = 10;
}
/** @} */