103 lines
3 KiB
Makefile
103 lines
3 KiB
Makefile
# Set this to the name of your sketch (without extension .pde)
|
|
SKETCH=sketch
|
|
|
|
all: arduino-example \
|
|
arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep
|
|
|
|
# variable for this Makefile
|
|
# configure CoAP implementation (3|7|12|13) (er-coap-07 also supports CoAP draft 08)
|
|
WITH_COAP=13
|
|
|
|
# for some platforms
|
|
UIP_CONF_IPV6=1
|
|
# IPv6 make config disappeared completely
|
|
CFLAGS += -DUIP_CONF_IPV6=1
|
|
|
|
CONTIKI=../../..
|
|
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
|
|
|
|
PROJECT_SOURCEFILES += resource_pir.c ${SKETCH}.cpp
|
|
|
|
# variable for Makefile.include
|
|
ifneq ($(TARGET), minimal-net)
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=1
|
|
else
|
|
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
|
|
${info INFO: compiling without RPL}
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=0
|
|
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
|
|
${info INFO: compiling with large buffers}
|
|
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
|
|
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
|
|
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
|
|
endif
|
|
|
|
# linker optimizations
|
|
SMALL=1
|
|
|
|
# REST framework, requires WITH_COAP
|
|
ifeq ($(WITH_COAP), 13)
|
|
${info INFO: compiling with CoAP-13}
|
|
CFLAGS += -DWITH_COAP=13
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-13
|
|
else ifeq ($(WITH_COAP), 12)
|
|
${info INFO: compiling with CoAP-12}
|
|
CFLAGS += -DWITH_COAP=12
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-12
|
|
else ifeq ($(WITH_COAP), 7)
|
|
${info INFO: compiling with CoAP-08}
|
|
CFLAGS += -DWITH_COAP=7
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-07
|
|
else ifeq ($(WITH_COAP), 3)
|
|
${info INFO: compiling with CoAP-03}
|
|
CFLAGS += -DWITH_COAP=3
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-03
|
|
else
|
|
${info INFO: compiling with HTTP}
|
|
CFLAGS += -DWITH_HTTP
|
|
CFLAGS += -DREST=http_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=1
|
|
APPS += er-http-engine
|
|
endif
|
|
|
|
APPS += erbium time json arduino json-resource
|
|
|
|
include $(CONTIKI)/Makefile.include
|
|
include $(CONTIKI)/apps/arduino/Makefile.include
|
|
|
|
arduino-example.osd-merkur.hex: arduino-example.osd-merkur
|
|
avr-objcopy -j .text -j .data -O ihex arduino-example.osd-merkur \
|
|
arduino-example.osd-merkur.hex
|
|
|
|
arduino-example.osd-merkur.eep: arduino-example.osd-merkur
|
|
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 -O ihex \
|
|
arduino-example.osd-merkur arduino-example.osd-merkur.eep
|
|
|
|
flash: arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep
|
|
avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \
|
|
flash:w:arduino-example.osd-merkur.hex:a -U \
|
|
eeprom:w:arduino-example.osd-merkur.eep:a
|
|
|
|
.PHONY: flash
|
|
|
|
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
|
|
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
|
|
|
|
connect-router: $(CONTIKI)/tools/tunslip6
|
|
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
|
|
|
|
connect-router-cooja: $(CONTIKI)/tools/tunslip6
|
|
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
|
|
|
|
connect-minimal:
|
|
sudo ip address add fdfd::1/64 dev tap0
|