296 lines
8.8 KiB
C++
296 lines
8.8 KiB
C++
/***************************************************************************
|
|
This is a library for the BME280 humidity, temperature & pressure sensor
|
|
|
|
Designed specifically to work with the Adafruit BME280 Breakout
|
|
----> http://www.adafruit.com/products/2650
|
|
|
|
These sensors use I2C or SPI to communicate, 2 or 4 pins are required
|
|
to interface.
|
|
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit andopen-source hardware by purchasing products
|
|
from Adafruit!
|
|
|
|
Written by Limor Fried & Kevin Townsend for Adafruit Industries.
|
|
BSD license, all text above must be included in any redistribution
|
|
***************************************************************************/
|
|
#ifndef __BME280_H__
|
|
#define __BME280_H__
|
|
|
|
#if (ARDUINO >= 100)
|
|
#include "Arduino.h"
|
|
#else
|
|
#include "WProgram.h"
|
|
#endif
|
|
|
|
#include <Adafruit_Sensor.h>
|
|
#include <Wire.h>
|
|
|
|
/*=========================================================================
|
|
I2C ADDRESS/BITS
|
|
-----------------------------------------------------------------------*/
|
|
#define BME280_ADDRESS (0x77)
|
|
/*=========================================================================*/
|
|
|
|
/*=========================================================================
|
|
REGISTERS
|
|
-----------------------------------------------------------------------*/
|
|
enum
|
|
{
|
|
BME280_REGISTER_DIG_T1 = 0x88,
|
|
BME280_REGISTER_DIG_T2 = 0x8A,
|
|
BME280_REGISTER_DIG_T3 = 0x8C,
|
|
|
|
BME280_REGISTER_DIG_P1 = 0x8E,
|
|
BME280_REGISTER_DIG_P2 = 0x90,
|
|
BME280_REGISTER_DIG_P3 = 0x92,
|
|
BME280_REGISTER_DIG_P4 = 0x94,
|
|
BME280_REGISTER_DIG_P5 = 0x96,
|
|
BME280_REGISTER_DIG_P6 = 0x98,
|
|
BME280_REGISTER_DIG_P7 = 0x9A,
|
|
BME280_REGISTER_DIG_P8 = 0x9C,
|
|
BME280_REGISTER_DIG_P9 = 0x9E,
|
|
|
|
BME280_REGISTER_DIG_H1 = 0xA1,
|
|
BME280_REGISTER_DIG_H2 = 0xE1,
|
|
BME280_REGISTER_DIG_H3 = 0xE3,
|
|
BME280_REGISTER_DIG_H4 = 0xE4,
|
|
BME280_REGISTER_DIG_H5 = 0xE5,
|
|
BME280_REGISTER_DIG_H6 = 0xE7,
|
|
|
|
BME280_REGISTER_CHIPID = 0xD0,
|
|
BME280_REGISTER_VERSION = 0xD1,
|
|
BME280_REGISTER_SOFTRESET = 0xE0,
|
|
|
|
BME280_REGISTER_CAL26 = 0xE1, // R calibration stored in 0xE1-0xF0
|
|
|
|
BME280_REGISTER_CONTROLHUMID = 0xF2,
|
|
BME280_REGISTER_STATUS = 0XF3,
|
|
BME280_REGISTER_CONTROL = 0xF4,
|
|
BME280_REGISTER_CONFIG = 0xF5,
|
|
BME280_REGISTER_PRESSUREDATA = 0xF7,
|
|
BME280_REGISTER_TEMPDATA = 0xFA,
|
|
BME280_REGISTER_HUMIDDATA = 0xFD
|
|
};
|
|
|
|
/*=========================================================================*/
|
|
|
|
/*=========================================================================
|
|
CALIBRATION DATA
|
|
-----------------------------------------------------------------------*/
|
|
typedef struct
|
|
{
|
|
uint16_t dig_T1;
|
|
int16_t dig_T2;
|
|
int16_t dig_T3;
|
|
|
|
uint16_t dig_P1;
|
|
int16_t dig_P2;
|
|
int16_t dig_P3;
|
|
int16_t dig_P4;
|
|
int16_t dig_P5;
|
|
int16_t dig_P6;
|
|
int16_t dig_P7;
|
|
int16_t dig_P8;
|
|
int16_t dig_P9;
|
|
|
|
uint8_t dig_H1;
|
|
int16_t dig_H2;
|
|
uint8_t dig_H3;
|
|
int16_t dig_H4;
|
|
int16_t dig_H5;
|
|
int8_t dig_H6;
|
|
} bme280_calib_data;
|
|
/*=========================================================================*/
|
|
|
|
/*
|
|
class Adafruit_BME280_Unified : public Adafruit_Sensor
|
|
{
|
|
public:
|
|
Adafruit_BME280_Unified(int32_t sensorID = -1);
|
|
|
|
bool begin(uint8_t addr = BME280_ADDRESS);
|
|
void getTemperature(float *temp);
|
|
void getPressure(float *pressure);
|
|
float pressureToAltitude(float seaLevel, float atmospheric, float temp);
|
|
float seaLevelForAltitude(float altitude, float atmospheric, float temp);
|
|
void getEvent(sensors_event_t*);
|
|
void getSensor(sensor_t*);
|
|
|
|
private:
|
|
uint8_t _i2c_addr;
|
|
int32_t _sensorID;
|
|
};
|
|
|
|
*/
|
|
|
|
class Adafruit_BME280 {
|
|
public:
|
|
enum sensor_sampling {
|
|
SAMPLING_NONE = 0b000,
|
|
SAMPLING_X1 = 0b001,
|
|
SAMPLING_X2 = 0b010,
|
|
SAMPLING_X4 = 0b011,
|
|
SAMPLING_X8 = 0b100,
|
|
SAMPLING_X16 = 0b101
|
|
};
|
|
|
|
enum sensor_mode {
|
|
MODE_SLEEP = 0b00,
|
|
MODE_FORCED = 0b01,
|
|
MODE_NORMAL = 0b11
|
|
};
|
|
|
|
enum sensor_filter {
|
|
FILTER_OFF = 0b000,
|
|
FILTER_X2 = 0b001,
|
|
FILTER_X4 = 0b010,
|
|
FILTER_X8 = 0b011,
|
|
FILTER_X16 = 0b100
|
|
};
|
|
|
|
// standby durations in ms
|
|
enum standby_duration {
|
|
STANDBY_MS_0_5 = 0b000,
|
|
STANDBY_MS_10 = 0b110,
|
|
STANDBY_MS_20 = 0b111,
|
|
STANDBY_MS_62_5 = 0b001,
|
|
STANDBY_MS_125 = 0b010,
|
|
STANDBY_MS_250 = 0b011,
|
|
STANDBY_MS_500 = 0b100,
|
|
STANDBY_MS_1000 = 0b101
|
|
};
|
|
|
|
// constructors
|
|
Adafruit_BME280(void);
|
|
Adafruit_BME280(int8_t cspin);
|
|
Adafruit_BME280(int8_t cspin, int8_t mosipin, int8_t misopin, int8_t sckpin);
|
|
|
|
bool begin(uint8_t addr = BME280_ADDRESS);
|
|
|
|
void setSampling(sensor_mode mode = MODE_NORMAL,
|
|
sensor_sampling tempSampling = SAMPLING_X16,
|
|
sensor_sampling pressSampling = SAMPLING_X16,
|
|
sensor_sampling humSampling = SAMPLING_X16,
|
|
sensor_filter filter = FILTER_OFF,
|
|
standby_duration duration = STANDBY_MS_0_5
|
|
);
|
|
|
|
void takeForcedMeasurement();
|
|
float readTemperature(void);
|
|
float readPressure(void);
|
|
float readHumidity(void);
|
|
|
|
float readAltitude(float seaLevel);
|
|
float seaLevelForAltitude(float altitude, float pressure);
|
|
|
|
|
|
private:
|
|
void readCoefficients(void);
|
|
bool isReadingCalibration(void);
|
|
uint8_t spixfer(uint8_t x);
|
|
|
|
void write8(byte reg, byte value);
|
|
uint8_t read8(byte reg);
|
|
uint16_t read16(byte reg);
|
|
uint32_t read24(byte reg);
|
|
int16_t readS16(byte reg);
|
|
uint16_t read16_LE(byte reg); // little endian
|
|
int16_t readS16_LE(byte reg); // little endian
|
|
|
|
uint8_t _i2caddr;
|
|
int32_t _sensorID;
|
|
int32_t t_fine;
|
|
|
|
int8_t _cs, _mosi, _miso, _sck;
|
|
|
|
bme280_calib_data _bme280_calib;
|
|
|
|
// The config register
|
|
struct config {
|
|
// inactive duration (standby time) in normal mode
|
|
// 000 = 0.5 ms
|
|
// 001 = 62.5 ms
|
|
// 010 = 125 ms
|
|
// 011 = 250 ms
|
|
// 100 = 500 ms
|
|
// 101 = 1000 ms
|
|
// 110 = 10 ms
|
|
// 111 = 20 ms
|
|
unsigned int t_sb : 3;
|
|
|
|
// filter settings
|
|
// 000 = filter off
|
|
// 001 = 2x filter
|
|
// 010 = 4x filter
|
|
// 011 = 8x filter
|
|
// 100 and above = 16x filter
|
|
unsigned int filter : 3;
|
|
|
|
// unused - don't set
|
|
unsigned int none : 1;
|
|
unsigned int spi3w_en : 1;
|
|
|
|
unsigned int get() {
|
|
return (t_sb << 5) | (filter << 3) | spi3w_en;
|
|
}
|
|
};
|
|
config _configReg;
|
|
|
|
|
|
// The ctrl_meas register
|
|
struct ctrl_meas {
|
|
// temperature oversampling
|
|
// 000 = skipped
|
|
// 001 = x1
|
|
// 010 = x2
|
|
// 011 = x4
|
|
// 100 = x8
|
|
// 101 and above = x16
|
|
unsigned int osrs_t : 3;
|
|
|
|
// pressure oversampling
|
|
// 000 = skipped
|
|
// 001 = x1
|
|
// 010 = x2
|
|
// 011 = x4
|
|
// 100 = x8
|
|
// 101 and above = x16
|
|
unsigned int osrs_p : 3;
|
|
|
|
// device mode
|
|
// 00 = sleep
|
|
// 01 or 10 = forced
|
|
// 11 = normal
|
|
unsigned int mode : 2;
|
|
|
|
unsigned int get() {
|
|
return (osrs_t << 5) | (osrs_p << 3) | mode;
|
|
}
|
|
};
|
|
ctrl_meas _measReg;
|
|
|
|
|
|
// The ctrl_hum register
|
|
struct ctrl_hum {
|
|
// unused - don't set
|
|
unsigned int none : 5;
|
|
|
|
// pressure oversampling
|
|
// 000 = skipped
|
|
// 001 = x1
|
|
// 010 = x2
|
|
// 011 = x4
|
|
// 100 = x8
|
|
// 101 and above = x16
|
|
unsigned int osrs_h : 3;
|
|
|
|
unsigned int get() {
|
|
return (osrs_h);
|
|
}
|
|
};
|
|
ctrl_hum _humReg;
|
|
};
|
|
|
|
#endif
|