b0206e2f58
Note: The raven-lcd-interface and raven-ipso modules in atmega128rfa1 seem to be needles for this platform and might be there only because of copy&paste from the raven platform. Should be removed in a later patch.
261 lines
7.4 KiB
C
261 lines
7.4 KiB
C
/* Copyright (c) 2008, Swedish Institute of Computer Science
|
|
* All rights reserved.
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of the copyright holders nor the names of
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/** \addtogroup raven
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \defgroup ravenserial Serial interface between Raven processors
|
|
*
|
|
* \brief This module contains code to interface a Contiki-based
|
|
* project on the AVR Raven platform's ATMega1284P chip to the LCD
|
|
* driver chip (ATMega3290P) on the Raven.
|
|
*
|
|
* \author Durvy Mathilde <mdurvy@cisco.com>
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* This file contains code to connect the two AVR Raven processors via
|
|
* a serial connection for the IPSO interop application
|
|
*
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
#include "contiki-lib.h"
|
|
#include "contiki-net.h"
|
|
|
|
#include "mac.h"
|
|
|
|
#include "raven-lcd.h"
|
|
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
|
|
#define cmd_len 8
|
|
#define data_len 20
|
|
|
|
static uint8_t seqno;
|
|
uip_ipaddr_t ping_addr;
|
|
uip_ipaddr_t udp_addr;
|
|
static struct uip_udp_conn *udp_conn;
|
|
char udp_data[data_len];
|
|
|
|
static struct{
|
|
uint8_t frame[cmd_len];
|
|
uint8_t ndx;
|
|
uint8_t len;
|
|
uint8_t cmd;
|
|
uint8_t done;
|
|
} cmd;
|
|
|
|
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
|
|
#define UIP_ICMP_BUF ((struct uip_icmp_hdr *)&uip_buf[uip_l2_l3_hdr_len])
|
|
|
|
void rs232_send(uint8_t port, unsigned char c);
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/* Sends a ping packet out the radio */
|
|
void
|
|
raven_ping6(void)
|
|
{
|
|
|
|
/* ping ipv6.google.com*/
|
|
uip_ip6addr(&ping_addr,0x2001,0x420,0x5FFF,0x7D,0x2D0,0xB7FF,0xFE23,0xE6DB);
|
|
//uip_ip6addr(&ping_addr, 0x2001, 0x4860, 0, 0x2001, 0, 0, 0, 0x68);
|
|
//uip_ip6addr(&ping_addr, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);
|
|
|
|
UIP_IP_BUF->vtc = 0x60;
|
|
UIP_IP_BUF->tcflow = 1;
|
|
UIP_IP_BUF->flow = 0;
|
|
UIP_IP_BUF->proto = UIP_PROTO_ICMP6;
|
|
//UIP_IP_BUF->ttl = uip_netif_physical_if.cur_hop_limit;
|
|
UIP_IP_BUF->ttl = uip_ds6_if.cur_hop_limit;
|
|
uip_ipaddr_copy(&UIP_IP_BUF->destipaddr, &ping_addr);
|
|
//uip_netif_select_src(&UIP_IP_BUF->srcipaddr, &UIP_IP_BUF->destipaddr);
|
|
uip_ds6_select_src(&UIP_IP_BUF->srcipaddr, &UIP_IP_BUF->destipaddr);
|
|
UIP_ICMP_BUF->type = ICMP6_ECHO_REQUEST;
|
|
UIP_ICMP_BUF->icode = 0;
|
|
/* set identifier and sequence number to 0 */
|
|
memset((void *)UIP_ICMP_BUF + UIP_ICMPH_LEN, 0, 4);
|
|
|
|
uip_len = UIP_ICMPH_LEN + UIP_ICMP6_ECHO_REQUEST_LEN + UIP_IPH_LEN;
|
|
UIP_IP_BUF->len[0] = (uint8_t)((uip_len - 40) >> 8);
|
|
UIP_IP_BUF->len[1] = (uint8_t)((uip_len - 40) & 0x00FF);
|
|
|
|
UIP_ICMP_BUF->icmpchksum = 0;
|
|
UIP_ICMP_BUF->icmpchksum = ~uip_icmp6chksum();
|
|
|
|
tcpip_ipv6_output();
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
/* Send a serial command frame to the ATMega3290 Processsor on Raven
|
|
via serial port */
|
|
static void
|
|
send_frame(uint8_t cmd, uint8_t len, uint8_t *payload)
|
|
{
|
|
uint8_t i;
|
|
|
|
rs232_send(0, SOF_CHAR); /* Start of Frame */
|
|
rs232_send(0, len);
|
|
rs232_send(0, cmd);
|
|
for (i=0;i<len;i++)
|
|
rs232_send(0,*payload++);
|
|
rs232_send(0, EOF_CHAR);
|
|
}
|
|
|
|
/*------------------------------------------------------------------*/
|
|
static uint8_t
|
|
raven_gui_loop(process_event_t ev, process_data_t data)
|
|
{
|
|
if(ev == tcpip_icmp6_event) {
|
|
switch(*((uint8_t *)data)){
|
|
case ICMP6_ECHO_REQUEST:
|
|
/* We have received a ping request over the air. Tell 3290 */
|
|
send_frame(REPORT_PING_BEEP, 0, 0);
|
|
break;
|
|
case ICMP6_ECHO_REPLY:
|
|
/* We have received a ping reply over the air. Pass seqno to 3290 */
|
|
send_frame(REPORT_PING, 1, &seqno);
|
|
break;
|
|
}
|
|
} else {
|
|
switch(ev){
|
|
case SERIAL_CMD:
|
|
/* Check for command from serial port, execute it. */
|
|
if (cmd.done){
|
|
/* Execute the waiting command */
|
|
switch (cmd.cmd){
|
|
case SEND_PING:
|
|
/* Send ping request over the air */
|
|
seqno = cmd.frame[0];
|
|
raven_ping6();
|
|
break;
|
|
case SEND_TEMP:
|
|
/* Set temperature string in web server */
|
|
sprintf(udp_data, "T%s\r\n", (char *)cmd.frame);
|
|
uip_udp_packet_send(udp_conn, udp_data, data_len);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
/* Reset command done flag. */
|
|
cmd.done = 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*--------------------------------------------------------------------*/
|
|
/* Process an input character from serial port.
|
|
* ** This is called from an ISR!!
|
|
*/
|
|
int raven_lcd_serial_input(unsigned char ch)
|
|
{
|
|
/* Parse frame, */
|
|
switch (cmd.ndx){
|
|
case 0:
|
|
/* first byte, must be 0x01 */
|
|
cmd.done = 0;
|
|
if (ch != 0x01){
|
|
return 0;
|
|
}
|
|
break;
|
|
case 1:
|
|
/* Second byte, length of payload */
|
|
cmd.len = ch;
|
|
break;
|
|
case 2:
|
|
/* Third byte, command byte */
|
|
cmd.cmd = ch;
|
|
break;
|
|
default:
|
|
/* Payload and ETX */
|
|
if (cmd.ndx >= cmd.len+3){
|
|
/* all done, check ETX */
|
|
if (ch == 0x04){
|
|
cmd.done = 1;
|
|
process_post(&raven_lcd_process, SERIAL_CMD, 0);
|
|
} else {
|
|
/* Failed ETX */
|
|
cmd.ndx = 0;
|
|
}
|
|
} else {
|
|
/* Just grab and store payload */
|
|
cmd.frame[cmd.ndx - 3] = ch;
|
|
}
|
|
break;
|
|
}
|
|
|
|
cmd.ndx++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS(raven_lcd_process, "Raven LCD interface process");
|
|
PROCESS_THREAD(raven_lcd_process, ev, data)
|
|
{
|
|
uint8_t error;
|
|
|
|
PROCESS_BEGIN();
|
|
|
|
/*Create a udp connection to the IPSOserver*/
|
|
|
|
//swisscom uip_ip6addr(&udp_addr,0x2001,918,0xfff9,0,0,0,0,1);
|
|
//HE uip_ip6addr(&udp_addr,0x2001,0x470,0x1f12,0x5ec,0x12,0x13ff,0xfe14,0x1516);
|
|
uip_ip6addr(&udp_addr,0x2001,0x420,0x5FFF,0x7D,0x2D0,0xB7FF,0xFE23,0xE6DB);
|
|
|
|
/* set destination parameters*/
|
|
udp_conn = udp_new(&udp_addr, UIP_HTONS(0xF0B0), NULL);
|
|
/*set local port */
|
|
udp_bind(udp_conn, UIP_HTONS(0xF0B0+1));
|
|
|
|
if((error = icmp6_new(NULL)) == 0) {
|
|
while(1) {
|
|
PROCESS_YIELD();
|
|
raven_gui_loop(ev, data);
|
|
}
|
|
}
|
|
PROCESS_END();
|
|
}
|
|
/** @} */
|
|
/** @} */
|