81 lines
4.3 KiB
Plaintext
81 lines
4.3 KiB
Plaintext
|
|
|
|
Open a terminal and go to "<CONTIKI_HOME>/examples/rest-example/" directory.
|
|
|
|
MAIN EXAMPLE:
|
|
rest-server-example.c : A RESTful server example showing how to use the REST layer to develop server-side applications (possible to run it over either COAP or HTTP)
|
|
To use COAP as the underlying application protocol, one should define WITH_COAP = 1 in rest-example/Makefile. Otherwise, HTTP is used.
|
|
Look at the source code to see which resources are available. (check the RESOURCE macros in the code).
|
|
Each resource has a handler function which is called by the REST layer to serve the request.
|
|
(i.e. "helloworld" resource has a handler function named "helloworld_handler" which is called when a web service request is received for "helloworld" resource.)
|
|
|
|
|
|
To run REST examples in COOJA under Linux
|
|
--------------------------------------------
|
|
|
|
Accessing the server from outside:
|
|
1. Start COOJA and load the simulation "rest-server-example.csc" by the following command.
|
|
make TARGET=cooja rest-server-example.csc
|
|
|
|
2. After loading the COOJA file, open another another terminal pointing to the same directory and connect to the COOJA simulation using tunslip6:
|
|
make connect-router-cooja
|
|
|
|
3. You need to use a COAP or HTTP client to interact with the COOJA nodes running REST code.
|
|
In this setting, two servers are available:
|
|
IP addresses are aaaa::0212:7402:0002:0202 and aaaa::0212:7403:0003:0303. COAP uses 61616, whereas HTTP uses 8080 port in default configuration.
|
|
First, ping the COOJA nodes to test the connectivity.
|
|
ping6 aaaa::0212:7402:0002:0202
|
|
ping6 aaaa::0212:7403:0003:0303
|
|
|
|
HTTP Examples
|
|
You can use curl as an http client to interact with the COOJA motes running REST code.
|
|
curl -H "User-Agent: curl" aaaa::0212:7402:0002:0202:8080/helloworld #get helloworld plain text
|
|
curl -H "User-Agent: curl" aaaa::0212:7402:0002:0202:8080/led?color=green -d mode=off -i #turn off the green led
|
|
curl -H "User-Agent: curl" aaaa::0212:7402:0002:0202:8080/.well-known/core -i
|
|
curl -X POST -H "User-Agent: curl" aaaa::0212:7402:0002:0202:8080/helloworld #method not allowed
|
|
|
|
COAP Examples
|
|
You should run a COAP client on your computer. You can use the URLs and methods provided above in HTTP examples to test the COAP Server.
|
|
|
|
Accessing the server inside the sensor network:
|
|
(Note: Provided only for COAP implementation)
|
|
Start COOJA and load the simulation "coap-client-server-example.csc" by the following command.
|
|
make TARGET=cooja coap-client-server-example.csc
|
|
|
|
coap-client-server-example.csc : Runs rest-server-example.c as the server (over COAP) (IP:aaaa::0212:7401:0001:0101)
|
|
in one node and coap-client-example.c as the client (IP: aaaa::0212:7402:0002:0202) in another node.
|
|
Client periodically accesses resources of server and prints the payload.
|
|
|
|
Note: If the generated binary is bigger than the MOTE code size, then you will get a "region text is full" error.
|
|
Right now, REST+HTTP example uses (Contiki + ContikiMAC + uIPv6 + RPL + HTTP Server + REST Layer) which does not fit in Tmote Sky memory.
|
|
To save same code space and make the example fit, you can define static routes rather than using RPL or use nullrdc rather than ContikiMAC.
|
|
|
|
|
|
To run REST server on real nodes under Linux
|
|
--------------------------------------------
|
|
|
|
1. Program the nodes with the rest-server-example
|
|
make TARGET=sky rest-server-example.upload
|
|
|
|
2. Disconnect the nodes and program one node with the RPL border router
|
|
(cd ../ipv6/rpl-border-router && make TARGET=sky border-router.upload)
|
|
|
|
3. Connect to the border router using tunslip6:
|
|
make connect-router
|
|
|
|
4. Reconnect the motes, reboot them and note their IP addresses.
|
|
|
|
5. Test the connectivity by pinging them.
|
|
ping6 <IPv6 Address of the MOTE>
|
|
|
|
5. Remaining parts are the same with the COOJA example. (i.e. if it is a COAP Server, it is available at <NODE_IP_ADDR>:61616)
|
|
|
|
|
|
To Do
|
|
*Better option handling needed - ex: critical options are not differentiated for now. Need to add support for some such as Tokens. Also, C/E difference should be added.
|
|
*Reilable message sending is missing. i.e. client example should resend request in case ACK does not arrive. Same for server pushing (in case of subscriptions)
|
|
*Add Block transfer example
|
|
*Add Subscription example
|
|
*Add an Android/Java COAP Client to Contikiprojects to be able to interact with Contiki.
|
|
*COAP-specific Method Codes
|