osd-contiki/platform/cooja/contiki-conf.h
Robert Quattlebaum b8c0f2de6c cpu/native: Add file-backed simulated EEPROM to native cpu.
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.

This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.

By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.

A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
2013-05-18 10:29:41 -07:00

252 lines
7.4 KiB
C

/*
* Copyright (c) 2006, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#define PROFILE_CONF_ON 0
#define ENERGEST_CONF_ON 0
#define LOG_CONF_ENABLED 1
#define COOJA 1
#ifndef EEPROM_CONF_SIZE
#define EEPROM_CONF_SIZE 1024
#endif
#define w_memcpy memcpy
#if WITH_UIP
#if WITH_UIP6
#error WITH_UIP && WITH_IP6: Bad configuration
#endif /* WITH_UIP6 */
#endif /* WITH_UIP */
#ifdef NETSTACK_CONF_H
/* These header overrides the below default configuration */
#define NETSTACK__QUOTEME(s) NETSTACK_QUOTEME(s)
#define NETSTACK_QUOTEME(s) #s
#include NETSTACK__QUOTEME(NETSTACK_CONF_H)
#else /* NETSTACK_CONF_H */
/* Default network config */
#if WITH_UIP6
#define NULLRDC_CONF_802154_AUTOACK 0
#define NULLRDC_CONF_SEND_802154_ACK 0
#define NULLRDC_CONF_ACK_WAIT_TIME RTIMER_SECOND / 500
#define NULLRDC_CONF_AFTER_ACK_DETECTED_WAIT_TIME RTIMER_SECOND / 250
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO cooja_radio_driver
#define NETSTACK_CONF_FRAMER framer_802154
#else /* WITH_UIP6 */
#if WITH_UIP
/* Network setup for IPv4 */
#define NETSTACK_CONF_NETWORK rime_driver /* NOTE: uip_over_mesh. else: uip_driver */
#define NETSTACK_CONF_MAC nullmac_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO cooja_radio_driver
#define UIP_CONF_IP_FORWARD 1
#else /* WITH_UIP */
/* Network setup for Rime */
#define NETSTACK_CONF_NETWORK rime_driver
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO cooja_radio_driver
/*#define NETSTACK_CONF_FRAMER framer_nullmac*/
#endif /* WITH_UIP */
#endif /* WITH_UIP6 */
#endif /* NETSTACK_CONF_H */
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
/* Default network config */
#if WITH_UIP6
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC nullrdc_driver
#define NETSTACK_CONF_RADIO cooja_radio_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define UIP_CONF_IPV6 1
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_LL_802154 1
#define UIP_CONF_LLH_LEN 0
#define UIP_CONF_ROUTER 1
#ifndef UIP_CONF_IPV6_RPL
#define UIP_CONF_IPV6_RPL 1
#endif /* UIP_CONF_IPV6_RPL */
/* configure number of neighbors and routes */
#ifndef UIP_CONF_DS6_NBR_NBU
#define UIP_CONF_DS6_NBR_NBU 300
#endif /* UIP_CONF_DS6_NBR_NBU */
#ifndef UIP_CONF_MAX_ROUTES
#define UIP_CONF_MAX_ROUTES 300
#endif /* UIP_CONF_MAX_ROUTES */
#define TCPIP_CONF_ANNOTATE_TRANSMISSIONS 1
#define RPL_CONF_DIO_INTERVAL_MIN 16
#define RPL_DIS_INTERVAL_CONF (5 * 60)
#define RPL_CONF_DAO_LATENCY (CLOCK_SECOND * 60)
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_ND6_REACHABLE_TIME 600000
#define UIP_CONF_ND6_RETRANS_TIMER 10000
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#ifndef UIP_CONF_IPV6_QUEUE_PKT
#define UIP_CONF_IPV6_QUEUE_PKT 1
#endif /* UIP_CONF_IPV6_QUEUE_PKT */
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
#define UIP_CONF_ND6_MAX_PREFIXES 3
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
#define UIP_CONF_IP_FORWARD 0
#ifndef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 240
#endif
#define SICSLOWPAN_CONF_COMPRESSION_IPV6 0
#define SICSLOWPAN_CONF_COMPRESSION_HC1 1
#define SICSLOWPAN_CONF_COMPRESSION_HC01 2
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 1
#define SICSLOWPAN_CONF_MAXAGE 8
#endif /* SICSLOWPAN_CONF_FRAG */
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#ifndef SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS
#define SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS 8
#endif /* SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS */
#endif /* WITH_UIP6 */
#define PACKETBUF_CONF_ATTRS_INLINE 1
#define QUEUEBUF_CONF_NUM 16
#define CC_CONF_REGISTER_ARGS 1
#define CC_CONF_FUNCTION_POINTER_ARGS 1
#define CC_CONF_FASTCALL
#define CC_CONF_VA_ARGS 1
#define CC_CONF_INLINE inline
#define CCIF
#define CLIF
/* These names are deprecated, use C99 names. */
#include <inttypes.h>
typedef uint8_t u8_t;
typedef uint16_t u16_t;
typedef uint32_t u32_t;
typedef int32_t s32_t;
typedef unsigned short uip_stats_t;
#define CLOCK_CONF_SECOND 1000L
typedef unsigned long clock_time_t;
typedef unsigned long rtimer_clock_t;
#define RTIMER_CLOCK_LT(a,b) ((signed long)((a)-(b)) < 0)
#define AODV_COMPLIANCE
#define AODV_NUM_RT_ENTRIES 32
#define WITH_ASCII 1
#define UIP_CONF_ICMP_DEST_UNREACH 1
#define UIP_CONF_DHCP_LIGHT
#define UIP_CONF_LLH_LEN 0
#ifndef UIP_CONF_RECEIVE_WINDOW
#define UIP_CONF_RECEIVE_WINDOW 48
#endif
#ifndef UIP_CONF_TCP_MSS
#define UIP_CONF_TCP_MSS 48
#endif
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 8
#define UIP_CONF_UDP_CONNS 12
#define UIP_CONF_FWCACHE_SIZE 30
#define UIP_CONF_BROADCAST 1
#define UIP_ARCH_IPCHKSUM 1
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_PINGADDRCONF 0
#define UIP_CONF_LOGGING 0
#define UIP_CONF_TCP_SPLIT 0
#if UIP_CONF_IPV6
#endif /* UIP_CONF_IPV6 */
#define CFS_CONF_OFFSET_TYPE long
/* include the project config */
/* PROJECT_CONF_H might be defined in the project Makefile */
#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */
#endif /* __CONTIKI_CONF_H__ */