5991c3e3db
Mainly for PWM use for now. With example to set the LED to different brightness via COAP. We switch the LED with 50 kHz (20µs) in this example.
99 lines
2.9 KiB
Makefile
99 lines
2.9 KiB
Makefile
all: er-example-server \
|
|
er-example-server.osd-merkur.hex er-example-server.osd-merkur.eep
|
|
# use this target explicitly if requried: er-plugtest-server
|
|
|
|
# variable for this Makefile
|
|
# configure CoAP implementation (3|7|12|13) (er-coap-07 also supports CoAP draft 08)
|
|
WITH_COAP=13
|
|
|
|
# for some platforms
|
|
UIP_CONF_IPV6=1
|
|
# IPv6 make config disappeared completely
|
|
CFLAGS += -DUIP_CONF_IPV6=1
|
|
|
|
CONTIKI=../../..
|
|
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
|
|
|
|
PROJECT_SOURCEFILES += resource_led_pwm.c
|
|
|
|
# variable for Makefile.include
|
|
ifneq ($(TARGET), minimal-net)
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=1
|
|
else
|
|
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
|
|
${info INFO: compiling without RPL}
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=0
|
|
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
|
|
${info INFO: compiling with large buffers}
|
|
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
|
|
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
|
|
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
|
|
endif
|
|
|
|
# linker optimizations
|
|
SMALL=1
|
|
|
|
# REST framework, requires WITH_COAP
|
|
ifeq ($(WITH_COAP), 13)
|
|
${info INFO: compiling with CoAP-13}
|
|
CFLAGS += -DWITH_COAP=13
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-13
|
|
else ifeq ($(WITH_COAP), 12)
|
|
${info INFO: compiling with CoAP-12}
|
|
CFLAGS += -DWITH_COAP=12
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-12
|
|
else ifeq ($(WITH_COAP), 7)
|
|
${info INFO: compiling with CoAP-08}
|
|
CFLAGS += -DWITH_COAP=7
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-07
|
|
else ifeq ($(WITH_COAP), 3)
|
|
${info INFO: compiling with CoAP-03}
|
|
CFLAGS += -DWITH_COAP=3
|
|
CFLAGS += -DREST=coap_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=0
|
|
APPS += er-coap-03
|
|
else
|
|
${info INFO: compiling with HTTP}
|
|
CFLAGS += -DWITH_HTTP
|
|
CFLAGS += -DREST=http_rest_implementation
|
|
CFLAGS += -DUIP_CONF_TCP=1
|
|
APPS += er-http-engine
|
|
endif
|
|
|
|
APPS += erbium json
|
|
|
|
include $(CONTIKI)/Makefile.include
|
|
|
|
er-example-server.osd-merkur.hex: er-example-server.osd-merkur
|
|
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur \
|
|
er-example-server.osd-merkur.hex
|
|
|
|
er-example-server.osd-merkur.eep: er-example-server.osd-merkur
|
|
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 -O ihex \
|
|
er-example-server.osd-merkur er-example-server.osd-merkur.eep
|
|
|
|
flash: er-example-server.osd-merkur.hex er-example-server.osd-merkur.eep
|
|
avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \
|
|
flash:w:er-example-server.osd-merkur.hex:a -U \
|
|
eeprom:w:er-example-server.osd-merkur.eep:a
|
|
|
|
.PHONY: flash
|
|
|
|
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
|
|
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
|
|
|
|
connect-router: $(CONTIKI)/tools/tunslip6
|
|
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
|
|
|
|
connect-router-cooja: $(CONTIKI)/tools/tunslip6
|
|
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
|
|
|
|
connect-minimal:
|
|
sudo ip address add fdfd::1/64 dev tap0
|