osd-contiki/cpu/cc2538/dev/aes.c
Benoît Thébaudeau ab1491be69 CC2538: Use CMSIS-CORE
Switch to CMSIS-CORE and remove the duplicate code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-11-24 22:30:26 +01:00

331 lines
11 KiB
C

/*
* Original file:
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Port to Contiki:
* Copyright (c) 2013, ADVANSEE - http://www.advansee.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-aes
* @{
*
* \file
* Implementation of the cc2538 AES driver
*/
#include "contiki.h"
#include "dev/rom-util.h"
#include "dev/nvic.h"
#include "dev/aes.h"
#include "reg.h"
#include <stdbool.h>
#include <stdint.h>
/*---------------------------------------------------------------------------*/
uint8_t
aes_load_keys(const void *keys, uint8_t key_size, uint8_t count,
uint8_t start_area)
{
uint32_t aes_key_store_size;
uint32_t areas;
uint64_t aligned_keys[AES_KEY_AREAS * 128 / 8 / sizeof(uint64_t)];
int i;
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
return CRYPTO_RESOURCE_IN_USE;
}
/* 192-bit keys must be padded to 256 bits */
if(key_size == AES_KEY_STORE_SIZE_KEY_SIZE_192) {
for(i = 0; i < count; i++) {
rom_util_memcpy(&aligned_keys[i << 2], &((const uint64_t *)keys)[i * 3],
192 / 8);
aligned_keys[(i << 2) + 3] = 0;
}
}
/* Change count to the number of 128-bit key areas */
if(key_size != AES_KEY_STORE_SIZE_KEY_SIZE_128) {
count <<= 1;
}
/* The keys base address needs to be 4-byte aligned */
if(key_size != AES_KEY_STORE_SIZE_KEY_SIZE_192) {
rom_util_memcpy(aligned_keys, keys, count << 4);
}
/* Workaround for AES registers not retained after PM2 */
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
AES_CTRL_INT_EN_RESULT_AV;
/* Configure master control module */
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_KEYSTORE;
/* Clear any outstanding events */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
/* Configure key store module (areas, size)
* Note that writing AES_KEY_STORE_SIZE deletes all stored keys */
aes_key_store_size = REG(AES_KEY_STORE_SIZE);
if((aes_key_store_size & AES_KEY_STORE_SIZE_KEY_SIZE_M) != key_size) {
REG(AES_KEY_STORE_SIZE) = (aes_key_store_size &
~AES_KEY_STORE_SIZE_KEY_SIZE_M) | key_size;
}
/* Free possibly already occupied key areas */
areas = ((0x00000001 << count) - 1) << start_area;
REG(AES_KEY_STORE_WRITTEN_AREA) = areas;
/* Enable key areas to write */
REG(AES_KEY_STORE_WRITE_AREA) = areas;
/* Configure DMAC
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the keys in ext. memory */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)aligned_keys;
/* Total keys length in bytes (e.g. 16 for 1 x 128-bit key) */
REG(AES_DMAC_CH0_DMALENGTH) = (REG(AES_DMAC_CH0_DMALENGTH) &
~AES_DMAC_CH_DMALENGTH_DMALEN_M) |
(count << (4 + AES_DMAC_CH_DMALENGTH_DMALEN_S));
/* Wait for operation to complete */
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_RESULT_AV));
/* Check for absence of errors in DMA and key store */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
/* Disable master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return CRYPTO_DMA_BUS_ERROR;
}
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_WR_ERR;
/* Disable master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return AES_KEYSTORE_WRITE_ERROR;
}
/* Acknowledge the interrupt */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
/* Disable master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
/* Check status, if error return error code */
if((REG(AES_KEY_STORE_WRITTEN_AREA) & areas) != areas) {
return AES_KEYSTORE_WRITE_ERROR;
}
return CRYPTO_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
aes_auth_crypt_start(uint32_t ctrl, uint8_t key_area, const void *iv,
const void *adata, uint16_t adata_len,
const void *data_in, void *data_out, uint16_t data_len,
struct process *process)
{
if(REG(AES_CTRL_ALG_SEL) != 0x00000000) {
return CRYPTO_RESOURCE_IN_USE;
}
/* Workaround for AES registers not retained after PM2 */
REG(AES_CTRL_INT_CFG) = AES_CTRL_INT_CFG_LEVEL;
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_DMA_IN_DONE |
AES_CTRL_INT_EN_RESULT_AV;
REG(AES_CTRL_ALG_SEL) = AES_CTRL_ALG_SEL_AES;
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
REG(AES_KEY_STORE_READ_AREA) = key_area;
/* Wait until key is loaded to the AES module */
while(REG(AES_KEY_STORE_READ_AREA) & AES_KEY_STORE_READ_AREA_BUSY);
/* Check for Key Store read error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
/* Clear the Keystore Read error bit */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return AES_KEYSTORE_READ_ERROR;
}
if(iv != NULL) {
/* Write initialization vector */
REG(AES_AES_IV_0) = ((const uint32_t *)iv)[0];
REG(AES_AES_IV_1) = ((const uint32_t *)iv)[1];
REG(AES_AES_IV_2) = ((const uint32_t *)iv)[2];
REG(AES_AES_IV_3) = ((const uint32_t *)iv)[3];
}
/* Program AES authentication/crypto operation */
REG(AES_AES_CTRL) = ctrl;
/* Write the length of the payload block (lo) */
REG(AES_AES_C_LENGTH_0) = data_len;
/* Write the length of the payload block (hi) */
REG(AES_AES_C_LENGTH_1) = 0;
/* For combined modes only (CCM or GCM) */
if(ctrl & (AES_AES_CTRL_CCM | AES_AES_CTRL_GCM)) {
/* Write the length of the AAD data block (may be non-block size-aligned) */
REG(AES_AES_AUTH_LENGTH) = adata_len;
if(adata_len != 0) {
/* Configure DMAC to fetch the AAD data
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the AAD data buffer */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)adata;
/* AAD data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = adata_len;
/* Wait for completion of the AAD data transfer, DMA_IN_DONE */
while(!(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_IN_DONE));
/* Check for the absence of error */
if(REG(AES_CTRL_INT_STAT) & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
/* Clear the DMA error */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR;
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
return CRYPTO_DMA_BUS_ERROR;
}
/* Clear interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE;
}
}
/* Enable result available bit in interrupt enable */
REG(AES_CTRL_INT_EN) = AES_CTRL_INT_EN_RESULT_AV;
if(process != NULL) {
crypto_register_process_notification(process);
NVIC_ClearPendingIRQ(AES_IRQn);
NVIC_EnableIRQ(AES_IRQn);
}
if(data_len != 0) {
/* Configure DMAC
* Enable DMA channel 0 */
REG(AES_DMAC_CH0_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the input payload data buffer */
REG(AES_DMAC_CH0_EXTADDR) = (uint32_t)data_in;
/* Input payload data length in bytes */
REG(AES_DMAC_CH0_DMALENGTH) = data_len;
if(data_out != NULL) {
/* Enable DMA channel 1 */
REG(AES_DMAC_CH1_CTRL) = AES_DMAC_CH_CTRL_EN;
/* Base address of the output payload data buffer */
REG(AES_DMAC_CH1_EXTADDR) = (uint32_t)data_out;
/* Output payload data length in bytes */
REG(AES_DMAC_CH1_DMALENGTH) = data_len;
}
}
return CRYPTO_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
aes_auth_crypt_check_status(void)
{
return !!(REG(AES_CTRL_INT_STAT) &
(AES_CTRL_INT_STAT_DMA_BUS_ERR | AES_CTRL_INT_STAT_KEY_ST_WR_ERR |
AES_CTRL_INT_STAT_KEY_ST_RD_ERR | AES_CTRL_INT_STAT_RESULT_AV));
}
/*---------------------------------------------------------------------------*/
uint8_t
aes_auth_crypt_get_result(void *iv, void *tag)
{
uint32_t aes_ctrl_int_stat;
aes_ctrl_int_stat = REG(AES_CTRL_INT_STAT);
/* Clear the error bits */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_BUS_ERR |
AES_CTRL_INT_CLR_KEY_ST_WR_ERR |
AES_CTRL_INT_CLR_KEY_ST_RD_ERR;
NVIC_DisableIRQ(AES_IRQn);
crypto_register_process_notification(NULL);
/* Disable the master control / DMA clock */
REG(AES_CTRL_ALG_SEL) = 0x00000000;
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_DMA_BUS_ERR) {
return CRYPTO_DMA_BUS_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_WR_ERR) {
return AES_KEYSTORE_WRITE_ERROR;
}
if(aes_ctrl_int_stat & AES_CTRL_INT_STAT_KEY_ST_RD_ERR) {
return AES_KEYSTORE_READ_ERROR;
}
if(iv != NULL || tag != NULL) {
/* Read result
* Wait for the context ready bit */
while(!(REG(AES_AES_CTRL) & AES_AES_CTRL_SAVED_CONTEXT_READY));
if(iv != NULL) {
/* Read the initialization vector registers */
((uint32_t *)iv)[0] = REG(AES_AES_IV_0);
((uint32_t *)iv)[1] = REG(AES_AES_IV_1);
((uint32_t *)iv)[2] = REG(AES_AES_IV_2);
((uint32_t *)iv)[3] = REG(AES_AES_IV_3);
}
if(tag != NULL) {
/* Read the tag registers */
((uint32_t *)tag)[0] = REG(AES_AES_TAG_OUT_0);
((uint32_t *)tag)[1] = REG(AES_AES_TAG_OUT_1);
((uint32_t *)tag)[2] = REG(AES_AES_TAG_OUT_2);
((uint32_t *)tag)[3] = REG(AES_AES_TAG_OUT_3);
}
}
/* Clear the interrupt status */
REG(AES_CTRL_INT_CLR) = AES_CTRL_INT_CLR_DMA_IN_DONE |
AES_CTRL_INT_CLR_RESULT_AV;
return CRYPTO_SUCCESS;
}
/** @} */