osd-contiki/examples/rime/example-rudolph2.c

/*
 * Copyright (c) 2007, Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 * $Id: example-rudolph2.c,v 1.8 2010/11/15 21:50:02 adamdunkels Exp $
 */

/**
 * \file
 *         Testing the rudolph2 code in Rime
 * \author
 *         Adam Dunkels <adam@sics.se>
 */

#include "contiki.h"
#include "net/rime.h"
#include "net/rime/rudolph2.h"

#include "dev/button-sensor.h"

#include "dev/leds.h"

#include "cfs/cfs.h"

#include <stdio.h>

#if CONTIKI_TARGET_NETSIM
#include "ether.h"
#include "node.h"
#endif /* CONTIKI_TARGET_NETSIM */

#define FILESIZE 2000

/*---------------------------------------------------------------------------*/
PROCESS(example_rudolph2_process, "Rudolph2 example");
AUTOSTART_PROCESSES(&example_rudolph2_process);
/*---------------------------------------------------------------------------*/
static void
write_chunk(struct rudolph2_conn *c, int offset, int flag,
	    uint8_t *data, int datalen)
{
  int fd;
#if CONTIKI_TARGET_NETSIM
  {
    char buf[100];
    sprintf(buf, "%d%%", (100 * (offset + datalen)) / FILESIZE);
    ether_set_text(buf);
  }
#endif /* CONTIKI_TARGET_NETSIM */

  if(flag == RUDOLPH2_FLAG_NEWFILE) {
    printf("+++ rudolph2 new file incoming at %lu\n", clock_time());
    leds_on(LEDS_RED);
    fd = cfs_open("codeprop.out", CFS_WRITE);
  } else {
    fd = cfs_open("codeprop.out", CFS_WRITE + CFS_APPEND);
  }
  
  if(datalen > 0) {
    int ret;
    cfs_seek(fd, offset, CFS_SEEK_SET);
    ret = cfs_write(fd, data, datalen);
    printf("+++ rudolph2 offset %d, length %d\n", offset, datalen);
  }

  cfs_close(fd);

  if(flag == RUDOLPH2_FLAG_LASTCHUNK) {
    int i;
    printf("+++ rudolph2 entire file received at %d, %d\n",
	   rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1]);
    leds_off(LEDS_RED);
    leds_on(LEDS_YELLOW);

    fd = cfs_open("hej", CFS_READ);
    for(i = 0; i < FILESIZE; ++i) {
      unsigned char buf;
      int r = cfs_read(fd, &buf, 1);
      if (r != 1) {
	printf("%d.%d: error: read failed at %d\n",
	       rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
	       i);
	break;
      }       
      else if(buf != (unsigned char)i) {
	printf("%d.%d: error: diff at %d, %d != %d\n",
	       rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
	       i, (unsigned char)i, buf);
	break;
      }
    }
#if CONTIKI_TARGET_NETSIM
    ether_send_done();
#endif
    cfs_close(fd);
  }
}
static int
read_chunk(struct rudolph2_conn *c, int offset, uint8_t *to, int maxsize)
{
  int fd;
  int ret;
  
  fd = cfs_open("hej", CFS_READ);

  cfs_seek(fd, offset, CFS_SEEK_SET);
  ret = cfs_read(fd, to, maxsize);
  /*  printf("%d.%d: read_chunk %d bytes at %d, %d\n",
	 rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
	 ret, offset, (unsigned char)to[0]);*/
  cfs_close(fd);
  return ret;
}
const static struct rudolph2_callbacks rudolph2_call = {write_chunk,
							read_chunk};
static struct rudolph2_conn rudolph2;
/*---------------------------------------------------------------------------*/
#include "node-id.h"

PROCESS_THREAD(example_rudolph2_process, ev, data)
{
  static int fd;
  PROCESS_EXITHANDLER(rudolph2_close(&rudolph2);)
  PROCESS_BEGIN();

  PROCESS_PAUSE();

  
  rudolph2_open(&rudolph2, 142, &rudolph2_call);
  SENSORS_ACTIVATE(button_sensor);

  PROCESS_PAUSE();
  
  if(rimeaddr_node_addr.u8[0] == 1 &&
     rimeaddr_node_addr.u8[1] == 0) {
    {
      int i;
      
      printf("%d.%d: selected data source\n",
	     rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1]);
      
      fd = cfs_open("hej", CFS_WRITE);
      for(i = 0; i < FILESIZE; i++) {
	unsigned char buf = i;
	int w = cfs_write(fd, &buf, 1);
	if (w != 1) {
	  printf("%d.%d: error: write failed at %d\n",
	       rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
	       i);
	  break;
	}       
      }
      cfs_close(fd);
    }
    rudolph2_send(&rudolph2, CLOCK_SECOND * 2);
#if CONTIKI_TARGET_NETSIM
    ether_send_done();
#endif /* CONTIKI_TARGET_NETSIM */

  }
  
  while(1) {

    PROCESS_WAIT_EVENT_UNTIL(ev == sensors_event &&
			     data == &button_sensor);
    rudolph2_stop(&rudolph2);

  }
  PROCESS_END();
}
/*---------------------------------------------------------------------------*/