deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/examples/z1/ipv6/z1-websense
History
Rémy Léone 7b40a568a6 Update to markdown 
- Spellchecking
- Update plain text to github markdown
2013-03-26 16:55:19 +01:00
..
example-sky-websense.csc Cleaned up some files, moved z1-websense example 2011-03-16 17:41:03 +01:00
Makefile Squeeze websense example 2012-05-09 10:44:41 +02:00
Makefile.target Cleaned up some files, moved z1-websense example 2011-03-16 17:41:03 +01:00
project-conf.h Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
README.markdown Update to markdown 2013-03-26 16:55:19 +01:00
websense-remote.c Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
wget.c Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
wget.h Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree 2012-10-26 15:54:49 +02:00
z1-websense.c Cleaned up some files, moved z1-websense example 2011-03-16 17:41:03 +01:00

README.markdown

Z1 websense

This example features a simple webserver running on top of the IPv6 contiki stack on Zolertia Z1 motes to provide sensor values, and with a RPL border router to bridge the sensor network to Internet.

To test the example in COOJA under Linux

  1. Start COOJA and load the simulation "example-z1-websense.csc"

    make TARGET=cooja example-z1-websense.csc

  2. Connect to the COOJA simulation using tunslip6:

    make connect-router-cooja

  3. You should now be able to browse to the nodes using your web browser: Router: http://[aaaa::0212:7401:0001:0101]/ Node 2: http://[aaaa::0212:7402:0002:0202]/

To run the example on real nodes under Linux

  1. Program the nodes with the websense application

    make TARGET=z1 z1-websense.upload

  2. Disconnect the nodes and program one node with the RPL border router

    cd ../rpl-border-router && make TARGET=z1 border-router.upload

  3. Connect to the border router using tunslip6:

    make connect-router

  4. Reboot the router and note the router IP address

  5. You should now be able to browse to your router node using your web browser: http://[]/. On this page you should see a list of all accessible nodes with their IP adresses.