165 lines
4.9 KiB
C
165 lines
4.9 KiB
C
/*
|
|
* Copyright (c) 2015, Copyright Robert Olsson / Radio Sensors AB
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
*
|
|
* Author : Robert Olsson robert@radio-sensors.com
|
|
* Created : 2015-12-30
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* An application for monitoring current use on Atmel
|
|
* radios also supporting the RPC function on RFR2 chips.
|
|
* Current needs to be measured with amp-meter.
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
#include "net/rime/rime.h"
|
|
#include "powertrace.h"
|
|
#include <stdio.h>
|
|
#include "dev/leds.h"
|
|
#include "rf230bb.h"
|
|
#include "net/packetbuf.h"
|
|
#include "net/rime/rimestats.h"
|
|
#include "net/netstack.h"
|
|
#include <avr/sleep.h>
|
|
#include <dev/watchdog.h>
|
|
|
|
#define TEST_PERIOD 6
|
|
|
|
static int ps = 0; /* Power-save false */
|
|
static char buf[110];
|
|
static struct etimer et;
|
|
|
|
PROCESS(power_use_process, "Power use test");
|
|
PROCESS(sleep_process, "Sleep process");
|
|
AUTOSTART_PROCESSES(&power_use_process, &sleep_process);
|
|
|
|
static void
|
|
broadcast_recv(struct broadcast_conn *c, const linkaddr_t *from)
|
|
{
|
|
printf("broadcast message received from %d.%d: '%s'\n",
|
|
from->u8[0], from->u8[1], (char *)packetbuf_dataptr());
|
|
}
|
|
|
|
static const struct broadcast_callbacks broadcast_call = {broadcast_recv};
|
|
static struct broadcast_conn broadcast;
|
|
|
|
|
|
PROCESS_THREAD(power_use_process, ev, data)
|
|
{
|
|
static int i, j;
|
|
PROCESS_EXITHANDLER(broadcast_close(&broadcast);)
|
|
PROCESS_BEGIN();
|
|
|
|
/* powertrace_start(CLOCK_SECOND * 2); */
|
|
broadcast_open(&broadcast, 129, &broadcast_call);
|
|
leds_init();
|
|
rf230_set_channel(25);
|
|
|
|
for(i=0; i < 2; i++) { /* Loop over min and max rpc settings */
|
|
|
|
NETSTACK_RADIO.off(); /* Radio off for rpc change */
|
|
NETSTACK_RADIO.off();
|
|
etimer_set(&et, CLOCK_SECOND * 8);
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
if(i == 0)
|
|
rf230_set_rpc(0x0); /* Disbable all RPC features */
|
|
else
|
|
rf230_set_rpc(0xFF); /* Enable all RPC features. Only XRFR2 radios */
|
|
NETSTACK_RADIO.on();
|
|
|
|
/* Loop over the different TX power settings 0-15 */
|
|
|
|
for(j=15; j >= 0; j--) {
|
|
NETSTACK_RADIO.on();
|
|
rf230_set_txpower(j);
|
|
ps = 0;
|
|
printf("TX with PWR=%d RPC=0x%02x\n", rf230_get_txpower(), rf230_get_rpc());
|
|
ps = 1;
|
|
|
|
etimer_set(&et, CLOCK_SECOND * TEST_PERIOD);
|
|
|
|
while(1) {
|
|
if(etimer_expired(&et))
|
|
break;
|
|
packetbuf_copyfrom(buf, sizeof(buf)); /* Dummy data */
|
|
broadcast_send(&broadcast);
|
|
PROCESS_PAUSE();
|
|
//leds_on(LEDS_RED);
|
|
}
|
|
/* Barrier so we can see next run */
|
|
NETSTACK_RADIO.off();
|
|
etimer_set(&et, CLOCK_SECOND * TEST_PERIOD);
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
}
|
|
|
|
/* RX */
|
|
NETSTACK_RADIO.on();
|
|
ps = 0;
|
|
printf("RX radio on RPC=0x%02x\n", rf230_get_rpc());
|
|
ps = 1;
|
|
etimer_set(&et, CLOCK_SECOND * TEST_PERIOD);
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
NETSTACK_RADIO.off();
|
|
}
|
|
|
|
/* Last just RX OFF*/
|
|
ps = 0;
|
|
printf("RX radio off\n");
|
|
ps = 1;
|
|
etimer_set(&et, CLOCK_SECOND * TEST_PERIOD);
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
|
|
PROCESS_END();
|
|
}
|
|
|
|
/* Sleep process is just put MCU in sleep so we minimiza MCU impact */
|
|
PROCESS_THREAD(sleep_process, ev, data)
|
|
{
|
|
PROCESS_BEGIN();
|
|
while(1) {
|
|
watchdog_periodic();
|
|
if(ps)
|
|
set_sleep_mode(SLEEP_MODE_PWR_SAVE);
|
|
else
|
|
set_sleep_mode(SLEEP_MODE_IDLE);
|
|
cli();
|
|
sleep_enable();
|
|
sei();
|
|
sleep_cpu();
|
|
sleep_disable();
|
|
sei();
|
|
PROCESS_PAUSE();
|
|
}
|
|
PROCESS_END();
|
|
}
|
|
|