osd-contiki/examples/osd/poti/Makefile
2015-01-26 17:27:12 +01:00

95 lines
2.6 KiB
Makefile

SERIAL=/dev/ttyUSB0
ifeq ($(TARGET), osd-merkur)
PLATFORM_FILES= avr-size poti.osd-merkur.hex \
poti.osd-merkur.eep
endif
all: poti $(PLATFORM_FILES)
CONTIKI=../../..
# Contiki IPv6 configuration
WITH_UIP6=1
UIP_CONF_IPV6=1
CFLAGS += -DUIP_CONF_IPV6=1
CFLAGS += -DUIP_CONF_IPV6_RPL=1
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
# automatically build RESTful resources
REST_RESOURCES_DIR = ./resources
REST_RESOURCES_DIR_COMMON = ../resources-common
REST_RESOURCES_FILES= $(notdir \
$(shell find $(REST_RESOURCES_DIR_COMMON) -name '*.c') \
)
PROJECTDIRS += $(REST_RESOURCES_DIR_COMMON)
PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)
# linker optimizations
SMALL=1
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += json json-resource
# optional rules to get assembly
#CUSTOM_RULE_C_TO_OBJECTDIR_O = 1
#CUSTOM_RULE_S_TO_OBJECTDIR_O = 1
include $(CONTIKI)/Makefile.include
# minimal-net target is currently broken in Contiki
ifeq ($(TARGET), minimal-net)
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=1300
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=176
CFLAGS += -DUIP_CONF_IPV6_RPL=0
endif
# optional rules to get assembly
#$(OBJECTDIR)/%.o: asmdir/%.S
# $(CC) $(CFLAGS) -MMD -c $< -o $@
# @$(FINALIZE_DEPENDENCY)
#
#asmdir/%.S: %.c
# $(CC) $(CFLAGS) -MMD -S $< -o $@
# border router rules
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 -p 60001 aaaa::1/64
connect-router-native: $(CONTIKI)/examples/ipv6/native-border-router/border-router.native
sudo $(CONTIKI)/exmples/ipv6/native-border-router/border-router.native -a 127.0.0.1 -p 60001 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0
avr-size: poti.osd-merkur
avr-size -C --mcu=MCU=atmega128rfa1 poti.osd-merkur
poti.osd-merkur.hex: poti.osd-merkur
avr-objcopy -j .text -j .data -O ihex poti.osd-merkur \
poti.osd-merkur.hex
poti.osd-merkur.eep: poti.osd-merkur
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O ihex \
poti.osd-merkur poti.osd-merkur.eep
flash: poti.osd-merkur.hex poti.osd-merkur.eep
avrdude -pm128rfa1 -c arduino -P$(SERIAL) -b57600 -e -U \
flash:w:poti.osd-merkur.hex:a -U \
eeprom:w:poti.osd-merkur.eep:a
.PHONY: flash avr-size