437 lines
11 KiB
C
437 lines
11 KiB
C
/* This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file rndis_task.c *********************************************************
|
|
*
|
|
* \brief
|
|
* Manages the RNDIS Dataclass for the USB Device
|
|
*
|
|
* \addtogroup usbstick
|
|
*
|
|
* \author
|
|
* Colin O'Flynn <coflynn@newae.com>
|
|
*
|
|
******************************************************************************/
|
|
/* Copyright (c) 2008 ATMEL Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
\addtogroup RNDIS
|
|
@{
|
|
*/
|
|
|
|
//_____ I N C L U D E S ___________________________________________________
|
|
|
|
|
|
#include "contiki.h"
|
|
#include "usb_drv.h"
|
|
#include "usb_descriptors.h"
|
|
#include "usb_specific_request.h"
|
|
#include "rndis/rndis_task.h"
|
|
#include "rndis/rndis_protocol.h"
|
|
#include "uip.h"
|
|
#include "sicslow_ethernet.h"
|
|
#include <stdio.h>
|
|
|
|
#include <avr/pgmspace.h>
|
|
#include <util/delay.h>
|
|
|
|
#define BUF ((struct uip_eth_hdr *)&uip_buf[0])
|
|
#define PRINTF printf
|
|
#define PRINTF_P printf_P
|
|
|
|
//_____ M A C R O S ________________________________________________________
|
|
|
|
|
|
|
|
|
|
|
|
//_____ D E F I N I T I O N S ______________________________________________
|
|
|
|
|
|
#define IAD_TIMEOUT_DETACH 400
|
|
#define IAD_TIMEOUT_ATTACH 800
|
|
|
|
#define RNDIS_TIMEOUT_DETACH 900
|
|
#define RNDIS_TIMEOUT_ATTACH 1000
|
|
|
|
#define PBUF ((rndis_data_packet_t *) data_buffer)
|
|
|
|
//_____ D E C L A R A T I O N S ____________________________________________
|
|
|
|
|
|
//! Timers for LEDs
|
|
uint8_t led1_timer, led2_timer;
|
|
|
|
//! Temp data buffer when adding RNDIS headers
|
|
uint8_t data_buffer[64];
|
|
|
|
//! Usb is busy with RNDIS
|
|
char usb_busy = 0;
|
|
|
|
|
|
static struct etimer et;
|
|
static struct timer flood_timer;
|
|
|
|
static uint8_t doInit = 1;
|
|
|
|
extern uint8_t fingerPresent;
|
|
|
|
PROCESS(rndis_process, "RNDIS process");
|
|
|
|
/**
|
|
* \brief RNDIS Process
|
|
*
|
|
* This is the link between USB and the "good stuff". In this routine data
|
|
* is received and processed by RNDIS
|
|
*/
|
|
PROCESS_THREAD(rndis_process, ev, data_proc)
|
|
{
|
|
|
|
PROCESS_BEGIN();
|
|
uint8_t bytecounter, headercounter;
|
|
uint16_t i, dataoffset;
|
|
clock_time_t timediff;
|
|
clock_time_t thetime;
|
|
|
|
while(1) {
|
|
|
|
// turn off LED's if necessary
|
|
if (led1_timer) led1_timer--;
|
|
else Led1_off();
|
|
if (led2_timer) led2_timer--;
|
|
else Led2_off();
|
|
|
|
/* Device is Enumerated but RNDIS not loading. We might
|
|
have a system that does not support IAD (winXP). If so
|
|
count the timeout then switch to just network interface. */
|
|
#if 0
|
|
static uint16_t iad_fail_timeout, rndis_fail_timeout;
|
|
if (usb_mode == rndis_debug) {
|
|
//If we have timed out, detach
|
|
if (iad_fail_timeout == IAD_TIMEOUT_DETACH) {
|
|
|
|
//Failed - BUT we are using "reverse logic", hence we force device
|
|
//into this mode. This is used to allow Windows Vista have time to
|
|
//install the drivers
|
|
if (fingerPresent && (rndis_state != rndis_data_initialized) && Is_device_enumerated() ) {
|
|
iad_fail_timeout = 0;
|
|
} else {
|
|
stdout = NULL;
|
|
Usb_detach();
|
|
doInit = 1; //Also mark system as needing intilizing
|
|
}
|
|
|
|
//Then wait a few before re-attaching
|
|
} else if (iad_fail_timeout == IAD_TIMEOUT_ATTACH) {
|
|
|
|
if (fingerPresent) {
|
|
usb_mode = mass_storage;
|
|
} else {
|
|
usb_mode = rndis_only;
|
|
}
|
|
Usb_attach();
|
|
}
|
|
|
|
//Increment timeout when device is not initializing, OR we have already detached,
|
|
//OR the user had their finger on the device, indicating a reverse of logic
|
|
if ( ( (rndis_state != rndis_data_initialized) && Is_device_enumerated() ) ||
|
|
(iad_fail_timeout > IAD_TIMEOUT_DETACH) ||
|
|
(fingerPresent) ) {
|
|
iad_fail_timeout++;
|
|
} else {
|
|
iad_fail_timeout = 0;
|
|
}
|
|
} //usb_mode == rndis_debug
|
|
|
|
|
|
/* Device is Enumerated but RNDIS STIL not loading. We just
|
|
have RNDIS interface, so obviously no drivers on target.
|
|
Just go ahead and mount ourselves as mass storage... */
|
|
if (usb_mode == rndis_only) {
|
|
//If we have timed out, detach
|
|
if (rndis_fail_timeout == RNDIS_TIMEOUT_DETACH) {
|
|
Usb_detach();
|
|
//Then wait a few before re-attaching
|
|
} else if (rndis_fail_timeout == RNDIS_TIMEOUT_ATTACH) {
|
|
usb_mode = mass_storage;
|
|
Usb_attach();
|
|
}
|
|
|
|
//Increment timeout when device is not initializing, OR we are already
|
|
//counting to detach
|
|
if ( ( (rndis_state != rndis_data_initialized)) ||
|
|
(rndis_fail_timeout > RNDIS_TIMEOUT_DETACH) ) {
|
|
rndis_fail_timeout++;
|
|
} else {
|
|
rndis_fail_timeout = 0;
|
|
}
|
|
}//usb_mode == rnids_only
|
|
#endif
|
|
|
|
|
|
if(rndis_state == rndis_data_initialized) //Enumeration processs OK ?
|
|
{
|
|
if (doInit) {
|
|
//start flood timer
|
|
timer_set(&flood_timer, CLOCK_SECOND / 5);
|
|
|
|
mac_ethernetSetup();
|
|
doInit = 0;
|
|
}
|
|
|
|
//Connected!
|
|
Led0_on();
|
|
|
|
Usb_select_endpoint(RX_EP);
|
|
|
|
//If we have data and a free buffer
|
|
if(Is_usb_receive_out() && (uip_len == 0)) {
|
|
|
|
//TODO: Fix this some better way
|
|
//If you need a delay in RNDIS to slow down super-fast sending, insert it here
|
|
//Also mark the USB as "in use"
|
|
|
|
//This is done as "flood control" by only allowing one IP packet per time limit
|
|
thetime = clock_time();
|
|
|
|
timediff = thetime - flood_timer.start;
|
|
|
|
//Oops, timer wrapped! Just ignore it for now
|
|
if (thetime < flood_timer.start) {
|
|
timediff = flood_timer.interval;
|
|
}
|
|
|
|
|
|
//If timer not yet expired
|
|
//if (timediff < flood_timer.interval) {
|
|
if (!timer_expired(&flood_timer)) {
|
|
//Wait until timer expiers
|
|
usb_busy = 1;
|
|
etimer_set(&et, flood_timer.interval - timediff);
|
|
//Try commenting out the next line if Jackdaw stops RF transmission in Windows after a 5 minute idle period - dak
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
|
|
//Reselect endpoint in case we lost it
|
|
Usb_select_endpoint(RX_EP);
|
|
usb_busy = 0;
|
|
}
|
|
|
|
|
|
//Restart flood timer
|
|
timer_restart(&flood_timer);
|
|
|
|
//Read how much (endpoint only stores up to 64 bytes anyway)
|
|
bytecounter = Usb_byte_counter_8();
|
|
|
|
//Try and read the header in
|
|
headercounter = sizeof(rndis_data_packet_t);
|
|
|
|
uint8_t fail = 0;
|
|
|
|
//Hmm.. what's going on here
|
|
if (bytecounter < headercounter) {
|
|
Usb_ack_receive_out();
|
|
fail = 1;
|
|
}
|
|
|
|
i = 0;
|
|
while (headercounter) {
|
|
data_buffer[i] = Usb_read_byte();
|
|
bytecounter--;
|
|
headercounter--;
|
|
i++;
|
|
}
|
|
|
|
//This is no good. Probably lost syncronization... just drop it for now
|
|
if(PBUF->MessageType != REMOTE_NDIS_PACKET_MSG) {
|
|
Usb_ack_receive_out();
|
|
fail = 1;
|
|
}
|
|
|
|
//802.3 does not have OOB data, and we don't care about per-packet data
|
|
//so that just leave regular packet data...
|
|
if (PBUF->DataLength && (fail == 0)) {
|
|
|
|
//Looks like we've got a live one
|
|
rx_start_led();
|
|
|
|
|
|
//Get offset
|
|
dataoffset = PBUF->DataOffset;
|
|
|
|
//Make it offset from start of message, not DataOffset field
|
|
dataoffset += (sizeof(rndis_MessageType_t) + sizeof(rndis_MessageLength_t));
|
|
|
|
//Subtract what we already took
|
|
dataoffset -= sizeof(rndis_data_packet_t);
|
|
|
|
//Read to the start of data
|
|
while(dataoffset) {
|
|
Usb_read_byte();
|
|
dataoffset--;
|
|
bytecounter--;
|
|
|
|
//If endpoint is done
|
|
if (bytecounter == 0) {
|
|
|
|
Usb_ack_receive_out();
|
|
|
|
|
|
//Wait for new data
|
|
while (!Is_usb_receive_out());
|
|
|
|
|
|
bytecounter = Usb_byte_counter_8();
|
|
}
|
|
|
|
}
|
|
|
|
//Read the data itself in
|
|
uint8_t * uipdata = uip_buf;
|
|
uint16_t datalen = PBUF->DataLength;
|
|
|
|
while(datalen) {
|
|
*uipdata++ = Usb_read_byte();
|
|
datalen--;
|
|
bytecounter--;
|
|
|
|
//If endpoint is done
|
|
if (bytecounter == 0) {
|
|
//Might be everything we need!
|
|
if (datalen) {
|
|
Usb_ack_receive_out();
|
|
//Wait for new data
|
|
while (!Is_usb_receive_out());
|
|
bytecounter = Usb_byte_counter_8();
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
//Ack final data packet
|
|
Usb_ack_receive_out();
|
|
|
|
//Send data over RF or to local stack
|
|
uip_len = PBUF->DataLength; //uip_len includes LLH_LEN
|
|
mac_ethernetToLowpan(uip_buf);
|
|
|
|
|
|
} //if (PBUF->DataLength)
|
|
|
|
|
|
} //if(Is_usb_receive_out() && (uip_len == 0))
|
|
|
|
} // if (rndis_data_intialized)
|
|
|
|
if ((usb_mode == rndis_only) || (usb_mode == rndis_debug)) {
|
|
etimer_set(&et, CLOCK_SECOND/80);
|
|
} else {
|
|
etimer_set(&et, CLOCK_SECOND);
|
|
}
|
|
|
|
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
|
} // while(1)
|
|
|
|
PROCESS_END();
|
|
}
|
|
|
|
/**
|
|
\brief Send data over RNDIS interface, data is in uipbuf and length is uiplen
|
|
*/
|
|
uint8_t rndis_send(uint8_t * senddata, uint16_t sendlen, uint8_t led)
|
|
{
|
|
|
|
|
|
uint16_t i;
|
|
|
|
//Setup Header
|
|
PBUF->MessageType = REMOTE_NDIS_PACKET_MSG;
|
|
PBUF->DataOffset = sizeof(rndis_data_packet_t) - sizeof(rndis_MessageType_t) - sizeof(rndis_MessageLength_t);
|
|
PBUF->DataLength = sendlen;
|
|
PBUF->OOBDataLength = 0;
|
|
PBUF->OOBDataOffset = 0;
|
|
PBUF->NumOOBDataElements = 0;
|
|
PBUF->PerPacketInfoOffset = 0;
|
|
PBUF->PerPacketInfoLength = 0;
|
|
PBUF->DeviceVcHandle = 0;
|
|
PBUF->Reserved = 0;
|
|
PBUF->MessageLength = sizeof(rndis_data_packet_t) + PBUF->DataLength;
|
|
|
|
//Send Data
|
|
Usb_select_endpoint(TX_EP);
|
|
Usb_send_in();
|
|
|
|
//Wait for ready
|
|
while(!Is_usb_write_enabled());
|
|
|
|
//Setup first part of transfer...
|
|
for(i = 0; i < sizeof(rndis_data_packet_t); i++) {
|
|
Usb_write_byte(data_buffer[i]);
|
|
}
|
|
|
|
//Send packet
|
|
while(sendlen) {
|
|
Usb_write_byte(*senddata);
|
|
senddata++;
|
|
sendlen--;
|
|
|
|
//If endpoint is full, send data in
|
|
//And then wait for data to transfer
|
|
if (!Is_usb_write_enabled()) {
|
|
Usb_send_in();
|
|
|
|
while(!Is_usb_write_enabled());
|
|
}
|
|
|
|
if (led) {
|
|
tx_end_led();
|
|
}
|
|
}
|
|
|
|
Usb_send_in();
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
@brief This will enable the RX_START LED for a period
|
|
*/
|
|
void rx_start_led(void)
|
|
{
|
|
Led1_on();
|
|
led1_timer = 10;
|
|
}
|
|
|
|
/**
|
|
@brief This will enable the TRX_END LED for a period
|
|
*/
|
|
void tx_end_led(void)
|
|
{
|
|
Led2_on();
|
|
led2_timer = 10;
|
|
}
|
|
/** @} */
|