717 lines
18 KiB
C
717 lines
18 KiB
C
/*
|
|
* Copyright (c) 2007, Swedish Institute of Computer Science
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
* @(#)$Id: cc2420.c,v 1.26 2009/02/25 21:21:06 nifi Exp $
|
|
*/
|
|
/*
|
|
* This code is almost device independent and should be easy to port.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include "contiki.h"
|
|
|
|
#if defined(__AVR__)
|
|
#include <avr/io.h>
|
|
#elif defined(__MSP430__)
|
|
#include <io.h>
|
|
#endif
|
|
|
|
#include "dev/leds.h"
|
|
#include "dev/spi.h"
|
|
#include "dev/cc2420.h"
|
|
#include "dev/cc2420_const.h"
|
|
|
|
#include "net/rime/rimestats.h"
|
|
|
|
#include "sys/timetable.h"
|
|
|
|
#define WITH_SEND_CCA 0
|
|
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
#include "net/rime/timesynch.h"
|
|
#define TIMESTAMP_LEN 3
|
|
#else /* CC2420_CONF_TIMESTAMPS */
|
|
#define TIMESTAMP_LEN 0
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
#define FOOTER_LEN 2
|
|
|
|
#ifndef CC2420_CONF_CHECKSUM
|
|
#define CC2420_CONF_CHECKSUM 0
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
|
|
#if CC2420_CONF_CHECKSUM
|
|
#include "lib/crc16.h"
|
|
#define CHECKSUM_LEN 2
|
|
#else
|
|
#define CHECKSUM_LEN 0
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
|
|
#define AUX_LEN (CHECKSUM_LEN + TIMESTAMP_LEN + FOOTER_LEN)
|
|
|
|
struct timestamp {
|
|
uint16_t time;
|
|
uint8_t authority_level;
|
|
};
|
|
|
|
|
|
#define FOOTER1_CRC_OK 0x80
|
|
#define FOOTER1_CORRELATION 0x7f
|
|
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...) do {} while (0)
|
|
#endif
|
|
|
|
void cc2420_arch_init(void);
|
|
|
|
/* XXX hack: these will be made as Chameleon packet attributes */
|
|
rtimer_clock_t cc2420_time_of_arrival, cc2420_time_of_departure;
|
|
|
|
int cc2420_authority_level_of_sender;
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
static rtimer_clock_t setup_time_for_transmission;
|
|
static unsigned long total_time_for_transmission, total_transmission_len;
|
|
static int num_transmissions;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS(cc2420_process, "CC2420 driver");
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
static void (* receiver_callback)(const struct radio_driver *);
|
|
|
|
int cc2420_on(void);
|
|
int cc2420_off(void);
|
|
|
|
int cc2420_read(void *buf, unsigned short bufsize);
|
|
|
|
int cc2420_send(const void *data, unsigned short len);
|
|
|
|
void cc2420_set_receiver(void (* recv)(const struct radio_driver *d));
|
|
|
|
|
|
signed char cc2420_last_rssi;
|
|
uint8_t cc2420_last_correlation;
|
|
|
|
const struct radio_driver cc2420_driver =
|
|
{
|
|
cc2420_send,
|
|
cc2420_read,
|
|
cc2420_set_receiver,
|
|
cc2420_on,
|
|
cc2420_off,
|
|
};
|
|
|
|
static uint8_t receive_on;
|
|
/* Radio stuff in network byte order. */
|
|
static uint16_t pan_id;
|
|
|
|
static int channel;
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t rxptr; /* Pointer to the next byte in the rxfifo. */
|
|
|
|
static void
|
|
getrxdata(void *buf, int len)
|
|
{
|
|
FASTSPI_READ_FIFO_NO_WAIT(buf, len);
|
|
rxptr = (rxptr + len) & 0x7f;
|
|
}
|
|
static void
|
|
getrxbyte(uint8_t *byte)
|
|
{
|
|
FASTSPI_READ_FIFO_BYTE(*byte);
|
|
rxptr = (rxptr + 1) & 0x7f;
|
|
}
|
|
static void
|
|
flushrx(void)
|
|
{
|
|
uint8_t dummy;
|
|
|
|
FASTSPI_READ_FIFO_BYTE(dummy);
|
|
FASTSPI_STROBE(CC2420_SFLUSHRX);
|
|
FASTSPI_STROBE(CC2420_SFLUSHRX);
|
|
rxptr = 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
strobe(enum cc2420_register regname)
|
|
{
|
|
FASTSPI_STROBE(regname);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static unsigned int
|
|
status(void)
|
|
{
|
|
uint8_t status;
|
|
FASTSPI_UPD_STATUS(status);
|
|
return status;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t locked, lock_on, lock_off;
|
|
|
|
static void
|
|
on(void)
|
|
{
|
|
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
|
PRINTF("on\n");
|
|
receive_on = 1;
|
|
|
|
ENABLE_FIFOP_INT();
|
|
strobe(CC2420_SRXON);
|
|
flushrx();
|
|
}
|
|
static void
|
|
off(void)
|
|
{
|
|
PRINTF("off\n");
|
|
receive_on = 0;
|
|
|
|
/* Wait for transmission to end before turning radio off. */
|
|
while(status() & BV(CC2420_TX_ACTIVE));
|
|
|
|
strobe(CC2420_SRFOFF);
|
|
DISABLE_FIFOP_INT();
|
|
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define GET_LOCK() locked = 1
|
|
static void RELEASE_LOCK(void) {
|
|
if(lock_on) {
|
|
on();
|
|
lock_on = 0;
|
|
}
|
|
if(lock_off) {
|
|
off();
|
|
lock_off = 0;
|
|
}
|
|
locked = 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static unsigned
|
|
getreg(enum cc2420_register regname)
|
|
{
|
|
unsigned reg;
|
|
FASTSPI_GETREG(regname, reg);
|
|
return reg;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
setreg(enum cc2420_register regname, unsigned value)
|
|
{
|
|
FASTSPI_SETREG(regname, value);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define AUTOACK (1 << 4)
|
|
#define ADR_DECODE (1 << 11)
|
|
#define RXFIFO_PROTECTION (1 << 9)
|
|
#define CORR_THR(n) (((n) & 0x1f) << 6)
|
|
#define FIFOP_THR(n) ((n) & 0x7f)
|
|
#define RXBPF_LOCUR (1 << 13);
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2420_set_receiver(void (* recv)(const struct radio_driver *))
|
|
{
|
|
receiver_callback = recv;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2420_init(void)
|
|
{
|
|
uint16_t reg;
|
|
{
|
|
int s = splhigh();
|
|
cc2420_arch_init(); /* Initalize ports and SPI. */
|
|
DISABLE_FIFOP_INT();
|
|
FIFOP_INT_INIT();
|
|
splx(s);
|
|
}
|
|
|
|
/* Turn on voltage regulator and reset. */
|
|
SET_VREG_ACTIVE();
|
|
//clock_delay(250); OK
|
|
SET_RESET_ACTIVE();
|
|
clock_delay(127);
|
|
SET_RESET_INACTIVE();
|
|
//clock_delay(125); OK
|
|
|
|
|
|
/* Turn on the crystal oscillator. */
|
|
strobe(CC2420_SXOSCON);
|
|
|
|
/* Turn off automatic packet acknowledgment. */
|
|
reg = getreg(CC2420_MDMCTRL0);
|
|
reg &= ~AUTOACK;
|
|
setreg(CC2420_MDMCTRL0, reg);
|
|
|
|
/* Turn off address decoding. */
|
|
reg = getreg(CC2420_MDMCTRL0);
|
|
reg &= ~ADR_DECODE;
|
|
setreg(CC2420_MDMCTRL0, reg);
|
|
|
|
/* Change default values as recomended in the data sheet, */
|
|
/* correlation threshold = 20, RX bandpass filter = 1.3uA. */
|
|
setreg(CC2420_MDMCTRL1, CORR_THR(20));
|
|
reg = getreg(CC2420_RXCTRL1);
|
|
reg |= RXBPF_LOCUR;
|
|
setreg(CC2420_RXCTRL1, reg);
|
|
|
|
/* Set the FIFOP threshold to maximum. */
|
|
setreg(CC2420_IOCFG0, FIFOP_THR(127));
|
|
|
|
/* Turn off "Security enable" (page 32). */
|
|
reg = getreg(CC2420_SECCTRL0);
|
|
reg &= ~RXFIFO_PROTECTION;
|
|
setreg(CC2420_SECCTRL0, reg);
|
|
|
|
cc2420_set_pan_addr(0xffff, 0x0000, NULL);
|
|
cc2420_set_channel(26);
|
|
|
|
process_start(&cc2420_process, NULL);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_send(const void *payload, unsigned short payload_len)
|
|
{
|
|
int i;
|
|
uint8_t total_len;
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
struct timestamp timestamp;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
#if CC2420_CONF_CHECKSUM
|
|
uint16_t checksum;
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
|
|
GET_LOCK();
|
|
|
|
PRINTF("cc2420: sending %d bytes\n", payload_len);
|
|
|
|
RIMESTATS_ADD(lltx);
|
|
|
|
/* Wait for any previous transmission to finish. */
|
|
while(status() & BV(CC2420_TX_ACTIVE));
|
|
|
|
/* Write packet to TX FIFO. */
|
|
strobe(CC2420_SFLUSHTX);
|
|
|
|
#if CC2420_CONF_CHECKSUM
|
|
checksum = crc16_data(payload, payload_len, 0);
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
total_len = payload_len + AUX_LEN;
|
|
FASTSPI_WRITE_FIFO(&total_len, 1);
|
|
FASTSPI_WRITE_FIFO(payload, payload_len);
|
|
#if CC2420_CONF_CHECKSUM
|
|
FASTSPI_WRITE_FIFO(&checksum, CHECKSUM_LEN);
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
timestamp.authority_level = timesynch_authority_level();
|
|
timestamp.time = timesynch_time();
|
|
FASTSPI_WRITE_FIFO(×tamp, TIMESTAMP_LEN);
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
/* The TX FIFO can only hold one packet. Make sure to not overrun
|
|
* FIFO by waiting for transmission to start here and synchronizing
|
|
* with the CC2420_TX_ACTIVE check in cc2420_send.
|
|
*
|
|
* Note that we may have to wait up to 320 us (20 symbols) before
|
|
* transmission starts.
|
|
*/
|
|
#ifdef TMOTE_SKY
|
|
#define LOOP_20_SYMBOLS 100 /* 326us (msp430 @ 2.4576MHz) */
|
|
#elif __AVR__
|
|
#define LOOP_20_SYMBOLS 500 /* XXX */
|
|
#endif
|
|
|
|
#if WITH_SEND_CCA
|
|
strobe(CC2420_SRXON);
|
|
while(!(status() & BV(CC2420_RSSI_VALID)));
|
|
strobe(CC2420_STXONCCA);
|
|
#else /* WITH_SEND_CCA */
|
|
strobe(CC2420_STXON);
|
|
#endif /* WITH_SEND_CCA */
|
|
|
|
for(i = LOOP_20_SYMBOLS; i > 0; i--) {
|
|
if(SFD_IS_1) {
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
rtimer_clock_t txtime = timesynch_time();
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
if(receive_on) {
|
|
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
|
}
|
|
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
|
|
|
|
/* We wait until transmission has ended so that we get an
|
|
accurate measurement of the transmission time.*/
|
|
while(status() & BV(CC2420_TX_ACTIVE));
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
setup_time_for_transmission = txtime - timestamp.time;
|
|
|
|
if(num_transmissions < 10000) {
|
|
total_time_for_transmission += timesynch_time() - txtime;
|
|
total_transmission_len += total_len;
|
|
num_transmissions++;
|
|
}
|
|
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
#ifdef ENERGEST_CONF_LEVELDEVICE_LEVELS
|
|
ENERGEST_OFF_LEVEL(ENERGEST_TYPE_TRANSMIT,cc2420_get_txpower());
|
|
#endif
|
|
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
|
|
if(receive_on) {
|
|
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* If we are using WITH_SEND_CCA, we get here if the packet wasn't
|
|
transmitted because of other channel activity. */
|
|
RIMESTATS_ADD(contentiondrop);
|
|
PRINTF("cc2420: do_send() transmission never started\n");
|
|
RELEASE_LOCK();
|
|
return -3; /* Transmission never started! */
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_off(void)
|
|
{
|
|
/* Don't do anything if we are already turned off. */
|
|
if(receive_on == 0) {
|
|
return 1;
|
|
}
|
|
|
|
/* If we are called when the driver is locked, we indicate that the
|
|
radio should be turned off when the lock is unlocked. */
|
|
if(locked) {
|
|
lock_off = 1;
|
|
return 1;
|
|
}
|
|
|
|
/* If we are currently receiving a packet (indicated by SFD == 1),
|
|
we don't actually switch the radio off now, but signal that the
|
|
driver should switch off the radio once the packet has been
|
|
received and processed, by setting the 'lock_off' variable. */
|
|
if(SFD_IS_1) {
|
|
lock_off = 1;
|
|
return 1;
|
|
}
|
|
|
|
off();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_on(void)
|
|
{
|
|
if(receive_on) {
|
|
return 1;
|
|
}
|
|
if(locked) {
|
|
lock_on = 1;
|
|
return 1;
|
|
}
|
|
|
|
on();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_get_channel(void)
|
|
{
|
|
return channel;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2420_set_channel(int c)
|
|
{
|
|
uint16_t f;
|
|
/*
|
|
* Subtract the base channel (11), multiply by 5, which is the
|
|
* channel spacing. 357 is 2405-2048 and 0x4000 is LOCK_THR = 1.
|
|
*/
|
|
|
|
channel = c;
|
|
|
|
f = 5 * (c - 11) + 357 + 0x4000;
|
|
/*
|
|
* Writing RAM requires crystal oscillator to be stable.
|
|
*/
|
|
while(!(status() & (BV(CC2420_XOSC16M_STABLE))));
|
|
|
|
/* Wait for any transmission to end. */
|
|
while(status() & BV(CC2420_TX_ACTIVE));
|
|
|
|
setreg(CC2420_FSCTRL, f);
|
|
|
|
/* If we are in receive mode, we issue an SRXON command to ensure
|
|
that the VCO is calibrated. */
|
|
if(receive_on) {
|
|
strobe(CC2420_SRXON);
|
|
}
|
|
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2420_set_pan_addr(unsigned pan,
|
|
unsigned addr,
|
|
const uint8_t *ieee_addr)
|
|
{
|
|
uint16_t f = 0;
|
|
/*
|
|
* Writing RAM requires crystal oscillator to be stable.
|
|
*/
|
|
while(!(status() & (BV(CC2420_XOSC16M_STABLE))));
|
|
|
|
pan_id = pan;
|
|
FASTSPI_WRITE_RAM_LE(&pan, CC2420RAM_PANID, 2, f);
|
|
FASTSPI_WRITE_RAM_LE(&addr, CC2420RAM_SHORTADDR, 2, f);
|
|
if(ieee_addr != NULL) {
|
|
FASTSPI_WRITE_RAM_LE(ieee_addr, CC2420RAM_IEEEADDR, 8, f);
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* Interrupt leaves frame intact in FIFO.
|
|
*/
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
static volatile rtimer_clock_t interrupt_time;
|
|
static volatile int interrupt_time_set;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
#if CC2420_TIMETABLE_PROFILING
|
|
#define cc2420_timetable_size 16
|
|
TIMETABLE(cc2420_timetable);
|
|
TIMETABLE_AGGREGATE(aggregate_time, 10);
|
|
#endif /* CC2420_TIMETABLE_PROFILING */
|
|
int
|
|
cc2420_interrupt(void)
|
|
{
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
interrupt_time = timesynch_time();
|
|
interrupt_time_set = 1;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
CLEAR_FIFOP_INT();
|
|
process_poll(&cc2420_process);
|
|
#if CC2420_TIMETABLE_PROFILING
|
|
timetable_clear(&cc2420_timetable);
|
|
TIMETABLE_TIMESTAMP(cc2420_timetable, "interrupt");
|
|
#endif /* CC2420_TIMETABLE_PROFILING */
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS_THREAD(cc2420_process, ev, data)
|
|
{
|
|
PROCESS_BEGIN();
|
|
|
|
PRINTF("cc2420_process: started\n");
|
|
|
|
while(1) {
|
|
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
|
|
#if CC2420_TIMETABLE_PROFILING
|
|
TIMETABLE_TIMESTAMP(cc2420_timetable, "poll");
|
|
#endif /* CC2420_TIMETABLE_PROFILING */
|
|
|
|
if(receiver_callback != NULL) {
|
|
PRINTF("cc2420_process: calling receiver callback\n");
|
|
receiver_callback(&cc2420_driver);
|
|
#if CC2420_TIMETABLE_PROFILING
|
|
TIMETABLE_TIMESTAMP(cc2420_timetable, "end");
|
|
timetable_aggregate_compute_detailed(&aggregate_time,
|
|
&cc2420_timetable);
|
|
timetable_clear(&cc2420_timetable);
|
|
#endif /* CC2420_TIMETABLE_PROFILING */
|
|
} else {
|
|
PRINTF("cc2420_process not receiving function\n");
|
|
flushrx();
|
|
}
|
|
}
|
|
|
|
PROCESS_END();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_read(void *buf, unsigned short bufsize)
|
|
{
|
|
uint8_t footer[2];
|
|
uint8_t len;
|
|
#if CC2420_CONF_CHECKSUM
|
|
uint16_t checksum;
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
struct timestamp t;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
if(!FIFOP_IS_1) {
|
|
/* If FIFOP is 0, there is no packet in the RXFIFO. */
|
|
return 0;
|
|
}
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
if(interrupt_time_set) {
|
|
cc2420_time_of_arrival = interrupt_time;
|
|
interrupt_time_set = 0;
|
|
} else {
|
|
cc2420_time_of_arrival = 0;
|
|
}
|
|
cc2420_time_of_departure = 0;
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
GET_LOCK();
|
|
|
|
getrxbyte(&len);
|
|
|
|
if(len > CC2420_MAX_PACKET_LEN) {
|
|
/* Oops, we must be out of sync. */
|
|
flushrx();
|
|
RIMESTATS_ADD(badsynch);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
if(len <= AUX_LEN) {
|
|
flushrx();
|
|
RIMESTATS_ADD(tooshort);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
if(len - AUX_LEN > bufsize) {
|
|
flushrx();
|
|
RIMESTATS_ADD(toolong);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
getrxdata(buf, len - AUX_LEN);
|
|
#if CC2420_CONF_CHECKSUM
|
|
getrxdata(&checksum, CHECKSUM_LEN);
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
getrxdata(&t, TIMESTAMP_LEN);
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
getrxdata(footer, FOOTER_LEN);
|
|
|
|
#if CC2420_CONF_CHECKSUM
|
|
if(footer[1] & FOOTER1_CRC_OK &&
|
|
checksum == crc16_data(buf, len - AUX_LEN, 0)) {
|
|
#else
|
|
if(footer[1] & FOOTER1_CRC_OK) {
|
|
#endif /* CC2420_CONF_CHECKSUM */
|
|
cc2420_last_rssi = footer[0];
|
|
cc2420_last_correlation = footer[1] & FOOTER1_CORRELATION;
|
|
RIMESTATS_ADD(llrx);
|
|
|
|
#if CC2420_CONF_TIMESTAMPS
|
|
cc2420_time_of_departure =
|
|
t.time +
|
|
setup_time_for_transmission +
|
|
(total_time_for_transmission * (len - 2)) / total_transmission_len;
|
|
|
|
cc2420_authority_level_of_sender = t.authority_level;
|
|
|
|
#endif /* CC2420_CONF_TIMESTAMPS */
|
|
|
|
} else {
|
|
RIMESTATS_ADD(badcrc);
|
|
len = AUX_LEN;
|
|
}
|
|
|
|
/* Clean up in case of FIFO overflow! This happens for every full
|
|
* length frame and is signaled by FIFOP = 1 and FIFO = 0.
|
|
*/
|
|
if(FIFOP_IS_1 && !FIFO_IS_1) {
|
|
/* printf("cc2420_read: FIFOP_IS_1 1\n");*/
|
|
flushrx();
|
|
} else if(FIFOP_IS_1) {
|
|
/* Another packet has been received and needs attention. */
|
|
process_poll(&cc2420_process);
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
|
|
if(len < AUX_LEN) {
|
|
return 0;
|
|
}
|
|
|
|
return len - AUX_LEN;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2420_set_txpower(uint8_t power)
|
|
{
|
|
uint16_t reg;
|
|
|
|
GET_LOCK();
|
|
reg = getreg(CC2420_TXCTRL);
|
|
reg = (reg & 0xffe0) | (power & 0x1f);
|
|
setreg(CC2420_TXCTRL, reg);
|
|
RELEASE_LOCK();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_get_txpower(void)
|
|
{
|
|
return (int)(getreg(CC2420_TXCTRL) & 0x001f);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2420_rssi(void)
|
|
{
|
|
int rssi;
|
|
int radio_was_off = 0;
|
|
|
|
if(!receive_on) {
|
|
radio_was_off = 1;
|
|
cc2420_on();
|
|
}
|
|
while(!(status() & BV(CC2420_RSSI_VALID))) {
|
|
/* printf("cc2420_rssi: RSSI not valid.\n");*/
|
|
}
|
|
|
|
rssi = (int)((signed char)getreg(CC2420_RSSI));
|
|
|
|
if(radio_was_off) {
|
|
cc2420_off();
|
|
}
|
|
return rssi;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|