osd-contiki/platform/z1/Makefile.common

147 lines
4 KiB
Makefile

# $Id: Makefile.z1,v 1.5 2011/02/26 enricmcalvo Exp $
ifdef GCC
CFLAGS+=-Os -g
endif
ifdef IAR
CFLAGS += -D__MSP430F2617__=1 -e --vla -Ohz --multiplier=16s --core=430X --double=32
else
LDFLAGS += -Wl,--defsym -Wl,__P1SEL2=0x0041 -Wl,--defsym -Wl,__P5SEL2=0x0045
endif
CLEAN += symbols.c symbols.h
ARCH=msp430.c leds.c watchdog.c xmem.c \
spi.c cc2420.c cc2420-aes.c cc2420-arch.c cc2420-arch-sfd.c\
node-id.c sensors.c button-sensor.c cfs-coffee.c \
radio-sensor.c uart0.c uart0-putchar.c uip-ipchksum.c \
checkpoint-arch.c slip.c slip_uart0.c \
z1-phidgets.c sht11.c sht11-sensor.c light-sensor.c \
battery-sensor.c sky-sensors.c tmp102.c temperature-sensor.c
CONTIKI_TARGET_DIRS = . dev apps net
ifndef CONTIKI_TARGET_MAIN
CONTIKI_TARGET_MAIN = contiki-z1-main.c
endif
ifdef UIP_CONF_IPV6
CFLAGS += -DWITH_UIP6=1
endif
ifdef nodemac
CFLAGS += -DMACID=$(nodemac)
endif
CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(UIPDRIVERS)
CONTIKI_TARGET_SOURCEFILES += i2cmaster.c adxl345.c
MCU=msp430f2617
include $(CONTIKI)/cpu/msp430/Makefile.msp430
# Add LDFLAGS after IAR_PATH is set
ifdef IAR
LDFLAGSNO += -B -xm "$(IAR_PATH)/lib/dlib/dl430xsfn.r43" -f "$(IAR_PATH)/config/lnk430f2617.xcl" -l contiki-$(TARGET).map -s __program_start -D_STACK_SIZE=80 -D_DATA16_HEAP_SIZE=80 -D_DATA20_HEAP_SIZE=80
LDFLAGS += $(LDFLAGSNO) -Felf -yn
endif
contiki-$(TARGET).a: ${addprefix $(OBJECTDIR)/,symbols.o}
# $(AR) rcf $@ $^
NUMPAR=20
IHEXFILE=tmpimage.ihex
# If we are not running under Windows, we assume Linux
ifndef MOTELIST
USBDEVPREFIX=
SERIALDUMP = $(CONTIKI)/tools/sky/serialdump-linux
MOTELIST = $(CONTIKI)/tools/z1/motelist-z1
BSL = $(CONTIKI)/tools/z1/z1-bsl-nopic --z1
BSL_FILETYPE = -I
MOTES = $(shell $(MOTELIST) -c 2>&- | \
cut -f 2 -d , | \
perl -ne 'print $$1 . " " if(m-(/dev/\w+)-);')
CMOTES=$(MOTES)
endif
motelist: z1-motelist
z1-motelist:
$(MOTELIST)
z1-motes:
@echo $(MOTES)
ifdef MOTE
%.upload: %.ihex
cp $< $(IHEXFILE)
$(MAKE) z1-u.$(subst /,-,$(word $(MOTE), $(MOTES)))
else # MOTE
%.upload: %.ihex
cp $< $(IHEXFILE)
@echo $(MOTES)
$(MAKE) z1-reset z1-upload
endif # MOTE
z1-upload: z1-reset
$(MAKE) -j $(NUMPAR) z1-upload-sequence
z1-upload-sequence: $(foreach PORT, $(MOTES), z1-u.$(subst /,-,$(PORT)))
@echo Done
z1-reset:
$(MAKE) -k -j $(NUMPAR) z1-reset-sequence
z1-reset-sequence: $(foreach PORT, $(MOTES), z1-r.$(subst /,-,$(PORT)))
@echo Done
z1-u.%:
@echo +++++ Erasing $(subst -,/,$*); \
$(BSL) -c $(subst -,/,$*) -e && sleep 2 ; \
echo +++++ Programming $(subst -,/,$*) ; \
$(BSL) -c $(subst -,/,$*) $(BSL_FILETYPE) -p $(IHEXFILE) && sleep 2 ; \
echo +++++ Resetting $(subst -,/,$*) ; \
$(BSL) -c $(subst -,/,$*) -r
z1-r.%:
$(BSL) -c $(subst -,/,$*) -r
sizeplot:
msp430-size $(OBJECTDIR)/*.o | $(CONTIKI)/tools/sky/check-size > size-data
gnuplot $(CONTIKI)/tools/sky/plot-size
gv size.pdf
winslip:
ifdef INTERFACE
$(CONTIKI)/tools/wpcapslip/wpcapslip -s $(USBDEVPREFIX)$(firstword $(CMOTES)) $(INTERFACE) 172.16.0.0 255.255.0.0
else
@echo "Usage: \"$(MAKE) $@ INTERFACE=<the IP address of a local network interface>\""
@echo "Use the \"ipconfig\" command to find out the IP addresses of the local interfaces"
endif
linslip: $(CONTIKI)/tools/tunslip
$(CONTIKI)/tools/tunslip -s $(USBDEVPREFIX)$(firstword $(CMOTES)) 172.16.0.0 255.255.0.0
$(CONTIKI)/tools/tunslip:
(cd $(CONTIKI)/tools; $(MAKE) tunslip)
ifdef MOTE
serialdump:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES)) | $(CONTIKI)/tools/timestamp | tee serialdump-`date +%Y%m%d-%H%M`
serialview:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES)) | $(CONTIKI)/tools/timestamp
login:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES))
else
serialdump:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES)) | $(CONTIKI)/tools/timestamp | tee serialdump-`date +%Y%m%d-%H%M`
serialview:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES)) | $(CONTIKI)/tools/timestamp
login:
$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES))
endif