9735acb03f
source. Using an external clock source (esp. the real-time clock) did not work. This might as well be a local problem (e.g. hardware). - Provide some dummy implementations in order to fix the build.
132 lines
2.5 KiB
C
132 lines
2.5 KiB
C
|
|
#include "sys/clock.h"
|
|
#include "sys/etimer.h"
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
|
|
static clock_time_t count;
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
SIGNAL(SIG_OUTPUT_COMPARE0)
|
|
{
|
|
++count;
|
|
if(etimer_pending()) {
|
|
etimer_request_poll();
|
|
}
|
|
}
|
|
|
|
/* External clock source does not work ? */
|
|
#if 0
|
|
void
|
|
clock_init(void)
|
|
{
|
|
cli ();
|
|
TIMSK &= ((unsigned char)~(1 << (TOIE0)));
|
|
TIMSK &= ((unsigned char)~(1 << (OCIE0)));
|
|
/* Disable TC0 interrupt */
|
|
|
|
/**
|
|
* set Timer/Counter0 to be asynchronous
|
|
* from the CPU clock with a second external
|
|
* clock(32,768kHz)driving it
|
|
*/
|
|
ASSR |= (1 << (AS0));
|
|
TCCR0 = _BV (CS02) | _BV (CS01) | _BV (WGM1);
|
|
|
|
TCNT0 = 0;
|
|
OCR0 = 128;
|
|
|
|
TIMSK |= (1 << (OCIE0));
|
|
TIMSK |= (1 << (TOIE0));
|
|
sei ();
|
|
}
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
clock_init(void)
|
|
{
|
|
cli ();
|
|
|
|
/* Select internal clock */
|
|
ASSR = 0x00;
|
|
|
|
/* Set counter to zero */
|
|
TCNT0 = 0;
|
|
|
|
/*
|
|
* Set comparison register:
|
|
* Crystal freq. is 16000000,
|
|
* pre-scale factor is 1024, i.e. we have 125 "ticks" / sec:
|
|
* 16000000 = 1024 * 125 * 125
|
|
*/
|
|
OCR0 = 125;
|
|
|
|
/*
|
|
* Set timer control register:
|
|
* - prescale: 1024 (CS00 - CS02)
|
|
* - counter reset via comparison register (WGM01)
|
|
*/
|
|
TCCR0 = _BV(CS00) | _BV(CS01) | _BV(CS02) | _BV(WGM01);
|
|
|
|
/* Clear interrupt flag register */
|
|
TIFR = 0x00;
|
|
|
|
/*
|
|
* Raise interrupt when value in OCR0 is reached. Note that the
|
|
* counter value in TCNT0 is cleared automatically.
|
|
*/
|
|
TIMSK = _BV (OCIE0);
|
|
|
|
/*
|
|
* Counts the number of ticks. Since clock_time_t is an unsigned
|
|
* 16 bit data type, time intervals of up to 524 seconds can be
|
|
* measured.
|
|
*/
|
|
count = 0;
|
|
|
|
sei ();
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
clock_time_t
|
|
clock_time(void)
|
|
{
|
|
return count;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* Delay the CPU for a multiple of TODO
|
|
*/
|
|
void
|
|
clock_delay(unsigned int i)
|
|
{
|
|
// TODO
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* Wait for a multiple of 1 / 125 sec = 0.008 ms.
|
|
*
|
|
*/
|
|
void
|
|
clock_wait(int i)
|
|
{
|
|
clock_time_t start;
|
|
|
|
start = clock_time();
|
|
while(clock_time() - start < (clock_time_t)i);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
clock_set_seconds(unsigned long sec)
|
|
{
|
|
// TODO
|
|
}
|
|
|
|
unsigned long
|
|
clock_seconds(void)
|
|
{
|
|
return count / CLOCK_SECOND;
|
|
}
|