osd-contiki/examples/osd/arduino-dallastemp/DallasTemperature.h
2015-10-07 16:14:00 +02:00

214 lines
5.8 KiB
C++

#ifndef DallasTemperature_h
#define DallasTemperature_h
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
// set to true to include code for new and delete operators
#ifndef REQUIRESNEW
#define REQUIRESNEW false
#endif
// set to true to include code implementing alarm search functions
#ifndef REQUIRESALARMS
#define REQUIRESALARMS true
#endif
#include <inttypes.h>
#include <OneWire.h>
// Model IDs
#define DS18S20MODEL 0x10
#define DS18B20MODEL 0x28
#define DS1822MODEL 0x22
// OneWire commands
#define STARTCONVO 0x44 // Tells device to take a temperature reading and put it on the scratchpad
#define COPYSCRATCH 0x48 // Copy EEPROM
#define READSCRATCH 0xBE // Read EEPROM
#define WRITESCRATCH 0x4E // Write to EEPROM
#define RECALLSCRATCH 0xB8 // Reload from last known
#define READPOWERSUPPLY 0xB4 // Determine if device needs parasite power
#define ALARMSEARCH 0xEC // Query bus for devices with an alarm condition
// Scratchpad locations
#define TEMP_LSB 0
#define TEMP_MSB 1
#define HIGH_ALARM_TEMP 2
#define LOW_ALARM_TEMP 3
#define CONFIGURATION 4
#define INTERNAL_BYTE 5
#define COUNT_REMAIN 6
#define COUNT_PER_C 7
#define SCRATCHPAD_CRC 8
// Device resolution
#define TEMP_9_BIT 0x1F // 9 bit
#define TEMP_10_BIT 0x3F // 10 bit
#define TEMP_11_BIT 0x5F // 11 bit
#define TEMP_12_BIT 0x7F // 12 bit
// Error Codes
#define DEVICE_DISCONNECTED -127
typedef uint8_t DeviceAddress[8];
class DallasTemperature
{
public:
DallasTemperature(OneWire*);
// initalize bus
void begin(void);
// returns the number of devices found on the bus
uint8_t getDeviceCount(void);
// returns true if address is valid
bool validAddress(uint8_t*);
// finds an address at a given index on the bus
bool getAddress(uint8_t*, const uint8_t);
// attempt to determine if the device at the given address is connected to the bus
bool isConnected(uint8_t*);
// attempt to determine if the device at the given address is connected to the bus
// also allows for updating the read scratchpad
bool isConnected(uint8_t*, uint8_t*);
// read device's scratchpad
void readScratchPad(uint8_t*, uint8_t*);
// write device's scratchpad
void writeScratchPad(uint8_t*, const uint8_t*);
// read device's power requirements
bool readPowerSupply(uint8_t*);
// returns the current resolution, 9-12
uint8_t getResolution(uint8_t*);
// set resolution of a device to 9, 10, 11, or 12 bits
void setResolution(uint8_t*, uint8_t);
// sends command for all devices on the bus to perform a temperature conversion
void requestTemperatures(void);
// sends command for one device to perform a temperature conversion by address
void requestTemperaturesByAddress(uint8_t*);
// sends command for one device to perform a temperature conversion by index
void requestTemperaturesByIndex(uint8_t);
// returns temperature in degrees C
float getTempC(uint8_t*);
// returns temperature in degrees F
float getTempF(uint8_t*);
// Get temperature for device index (slow)
float getTempCByIndex(uint8_t);
// Get temperature for device index (slow)
float getTempFByIndex(uint8_t);
// returns true if the bus requires parasite power
bool isParasitePowerMode(void);
#if REQUIRESALARMS
typedef void AlarmHandler(uint8_t*);
// sets the high alarm temperature for a device
// accepts a char. valid range is -55C - 125C
void setHighAlarmTemp(uint8_t*, const char);
// sets the low alarm temperature for a device
// accepts a char. valid range is -55C - 125C
void setLowAlarmTemp(uint8_t*, const char);
// returns a signed char with the current high alarm temperature for a device
// in the range -55C - 125C
char getHighAlarmTemp(uint8_t*);
// returns a signed char with the current low alarm temperature for a device
// in the range -55C - 125C
char getLowAlarmTemp(uint8_t*);
// resets internal variables used for the alarm search
void resetAlarmSearch(void);
// search the wire for devices with active alarms
bool alarmSearch(uint8_t*);
// returns true if ia specific device has an alarm
bool hasAlarm(uint8_t*);
// returns true if any device is reporting an alarm on the bus
bool hasAlarm(void);
// runs the alarm handler for all devices returned by alarmSearch()
void processAlarms(void);
// sets the alarm handler
void setAlarmHandler(AlarmHandler *);
// The default alarm handler
static void defaultAlarmHandler(uint8_t*);
#endif
// convert from celcius to farenheit
static float toFahrenheit(const float);
// convert from farenheit to celsius
static float toCelsius(const float);
#if REQUIRESNEW
// initalize memory area
void* operator new (unsigned int);
// delete memory reference
void operator delete(void*);
#endif
private:
typedef uint8_t ScratchPad[9];
// parasite power on or off
bool parasite;
// used to determine the delay amount needed to allow for the
// temperature conversion to take place
int conversionDelay;
// count of devices on the bus
uint8_t devices;
// Take a pointer to one wire instance
OneWire* _wire;
// reads scratchpad and returns the temperature in degrees C
float calculateTemperature(uint8_t*, uint8_t*);
#if REQUIRESALARMS
// required for alarmSearch
uint8_t alarmSearchAddress[8];
char alarmSearchJunction;
uint8_t alarmSearchExhausted;
// the alarm handler function pointer
AlarmHandler *_AlarmHandler;
#endif
};
#endif