343 lines
12 KiB
C
343 lines
12 KiB
C
/*
|
|
* Copyright (c) 2015, Zolertia - http://www.zolertia.com
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup cc2538-pwm-driver
|
|
* @{
|
|
*
|
|
* \file
|
|
* Driver for the CC2538 PWM
|
|
*
|
|
* \author
|
|
* Javier Sanchez <jsanchez@zolertia.com>
|
|
* Antonio Lignan <alinan@zolertia.com>
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki.h"
|
|
#include "dev/ioc.h"
|
|
#include "dev/gpio.h"
|
|
#include "dev/sys-ctrl.h"
|
|
#include "dev/pwm.h"
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...)
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
#define PWM_GPTIMER_NUM_TO_BASE(x) ((GPT_0_BASE) + ((x) << 12))
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t
|
|
pwm_configured(uint8_t timer, uint8_t ab)
|
|
{
|
|
uint8_t offset;
|
|
uint32_t gpt_base;
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
offset = (ab) ? 4 : 0;
|
|
|
|
if((REG(gpt_base + GPTIMER_TAMR + offset) & GPTIMER_TAMR_TAAMS) &&
|
|
(REG(gpt_base + GPTIMER_TAMR + offset) & GPTIMER_TAMR_TAMR_PERIODIC)) {
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_enable(uint32_t freq, uint8_t duty, uint8_t timer, uint8_t ab)
|
|
{
|
|
uint8_t offset = 0;
|
|
uint32_t interval_load, duty_count, copy;
|
|
uint32_t gpt_base, gpt_en, gpt_dir;
|
|
|
|
if((freq < PWM_FREQ_MIN) || (freq > PWM_FREQ_MAX) ||
|
|
(duty < PWM_DUTY_MIN) || (duty > PWM_DUTY_MAX) ||
|
|
(timer > PWM_TIMER_MAX) || (timer < PWM_TIMER_MIN)) {
|
|
PRINTF("PWM: Invalid PWM settings\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* GPT0 timer A is used for clock_delay_usec() in clock.c */
|
|
if((ab == PWM_TIMER_A) && (timer == PWM_TIMER_0)) {
|
|
PRINTF("PWM: GPT0 (timer A) is reserved for clock_delay_usec()\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
PRINTF("PWM: F%08luHz: %u%% on GPT%u-%u\n", freq, duty, timer, ab);
|
|
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
gpt_en = GPTIMER_CTL_TAEN;
|
|
gpt_dir = GPTIMER_CTL_TAPWML;
|
|
|
|
if(ab == PWM_TIMER_B) {
|
|
offset = 4;
|
|
gpt_en = GPTIMER_CTL_TBEN;
|
|
gpt_dir = GPTIMER_CTL_TBPWML;
|
|
}
|
|
|
|
PRINTF("PWM: GPT_x_BASE 0x%08lX (%u)\n", gpt_base, offset);
|
|
|
|
/* Restore later, ensure GPTIMER_CTL_TxEN and GPTIMER_CTL_TxPWML are clear */
|
|
copy = REG(gpt_base + GPTIMER_CTL);
|
|
copy &= ~(gpt_en | gpt_dir);
|
|
|
|
/* Enable module clock for the GPTx in Active mode */
|
|
REG(SYS_CTRL_RCGCGPT) |= (SYS_CTRL_RCGCGPT_GPT0 << timer);
|
|
/* Enable module clock for the GPTx in Sleep mode */
|
|
REG(SYS_CTRL_SCGCGPT) |= (SYS_CTRL_SCGCGPT_GPT0 << timer);
|
|
/* Enable module clock for the GPTx in PM0, in PM1 and below this doesn't matter */
|
|
REG(SYS_CTRL_DCGCGPT) |= (SYS_CTRL_DCGCGPT_GPT0 << timer);
|
|
|
|
/* Stop the timer */
|
|
REG(gpt_base + GPTIMER_CTL) = 0;
|
|
/* Use 16-bit timer */
|
|
REG(gpt_base + GPTIMER_CFG) = PWM_GPTIMER_CFG_SPLIT_MODE;
|
|
/* Configure PWM mode */
|
|
REG(gpt_base + GPTIMER_TAMR + offset) = 0;
|
|
REG(gpt_base + GPTIMER_TAMR + offset) |= GPTIMER_TAMR_TAAMS;
|
|
REG(gpt_base + GPTIMER_TAMR + offset) |= GPTIMER_TAMR_TAMR_PERIODIC;
|
|
|
|
/* If the duty cycle is zero, leave the GPTIMER configured as PWM to pass a next
|
|
* configured check, but do nothing else */
|
|
if(!duty) {
|
|
REG(gpt_base + GPTIMER_CTL) |= (copy | gpt_dir);
|
|
return PWM_SUCCESS;
|
|
}
|
|
|
|
/* Get the peripheral clock and equivalent deassert count */
|
|
interval_load = sys_ctrl_get_io_clock() / freq;
|
|
duty_count = ((interval_load * duty) + 1) / 100;
|
|
|
|
PRINTF("PWM: IO %luHz: %lu %lu\n", sys_ctrl_get_io_clock(),
|
|
interval_load, duty_count);
|
|
|
|
/* Set the start value (period), count down */
|
|
REG(gpt_base + GPTIMER_TAILR + offset) = ((uint16_t *)&interval_load)[0] - 1;
|
|
/* Set the deassert period */
|
|
REG(gpt_base + GPTIMER_TAMATCHR + offset) = ((uint16_t *)&duty_count)[0] - 1;
|
|
/* Set the prescaler if required */
|
|
REG(gpt_base + GPTIMER_TAPR + offset) = ((uint8_t *)&interval_load)[2];
|
|
/* Set the prescaler match if required */
|
|
REG(gpt_base + GPTIMER_TAPMR + offset) = ((uint8_t *)&duty_count)[2];
|
|
/* Restore the register content */
|
|
REG(gpt_base + GPTIMER_CTL) |= (copy | gpt_dir);
|
|
|
|
PRINTF("PWM: TnILR %lu ", REG(gpt_base + (GPTIMER_TAILR + offset)));
|
|
PRINTF("TnMATCHR %lu ", REG(gpt_base + (GPTIMER_TAMATCHR + offset)));
|
|
PRINTF("TnPR %lu ", REG(gpt_base + (GPTIMER_TAPR + offset)));
|
|
PRINTF("TnPMR %lu\n", REG(gpt_base + (GPTIMER_TAPMR + offset)));
|
|
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_stop(uint8_t timer, uint8_t ab, uint8_t port, uint8_t pin, uint8_t state)
|
|
{
|
|
uint32_t gpt_base, gpt_dis;
|
|
|
|
if((ab > PWM_TIMER_B) || (timer < PWM_TIMER_MIN) ||
|
|
(timer > PWM_TIMER_MAX)) {
|
|
PRINTF("PWM: Invalid PWM values\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
if(!pwm_configured(timer, ab)) {
|
|
PRINTF("PWM: GPTn not configured as PWM\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* CC2538 has 4 ports (A-D) and up to 8 pins (0-7) */
|
|
if((port > GPIO_D_NUM) || (pin > 7)) {
|
|
PRINTF("PWM: Invalid pin/port settings\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* CC2538 has 4 ports (A-D) and up to 8 pins (0-7) */
|
|
if((state != PWM_OFF_WHEN_STOP) && (state != PWM_ON_WHEN_STOP)) {
|
|
PRINTF("PWM: Invalid pin state when PWM is halt\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
gpt_dis = (ab == PWM_TIMER_B) ? GPTIMER_CTL_TBEN : GPTIMER_CTL_TAEN;
|
|
REG(gpt_base + GPTIMER_CTL) &= ~gpt_dis;
|
|
|
|
/* Configure the port/pin as GPIO, input */
|
|
ioc_set_over(port, pin, IOC_OVERRIDE_DIS);
|
|
GPIO_SOFTWARE_CONTROL(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
GPIO_SET_OUTPUT(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
if(state) {
|
|
GPIO_SET_PIN(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
} else {
|
|
GPIO_CLR_PIN(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
}
|
|
PRINTF("PWM: OFF -> Timer %u (%u)\n", timer, ab);
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_start(uint8_t timer, uint8_t ab, uint8_t port, uint8_t pin)
|
|
{
|
|
uint32_t gpt_base, gpt_en, gpt_sel;
|
|
|
|
if((ab > PWM_TIMER_B) || (timer < PWM_TIMER_MIN) ||
|
|
(timer > PWM_TIMER_MAX)) {
|
|
PRINTF("PWM: Invalid PWM values\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
if(!pwm_configured(timer, ab)) {
|
|
PRINTF("PWM: GPTn not configured as PWM\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* CC2538 has 4 ports (A-D) and up to 8 pins (0-7) */
|
|
if((port > GPIO_D_NUM) || (pin > 7)) {
|
|
PRINTF("PWM: Invalid pin/port settings\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* Map to given port/pin */
|
|
gpt_sel = IOC_PXX_SEL_GPT0_ICP1 + (timer * 2);
|
|
if(ab == PWM_TIMER_B) {
|
|
gpt_sel++;
|
|
}
|
|
ioc_set_sel(port, pin, gpt_sel);
|
|
ioc_set_over(port, pin, IOC_OVERRIDE_OE);
|
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
gpt_en = (ab == PWM_TIMER_B) ? GPTIMER_CTL_TBEN : GPTIMER_CTL_TAEN;
|
|
REG(gpt_base + GPTIMER_CTL) |= gpt_en;
|
|
PRINTF("PWM: ON -> Timer %u (%u) IOC_PXX_SEL_GPTx_IPCx 0x%08lX\n", timer, ab,
|
|
gpt_sel);
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_set_direction(uint8_t timer, uint8_t ab, uint8_t dir)
|
|
{
|
|
uint32_t gpt_base, gpt_dir;
|
|
|
|
if((ab > PWM_TIMER_B) || (timer < PWM_TIMER_MIN) ||
|
|
(timer > PWM_TIMER_MAX) || (dir > PWM_SIGNAL_INVERTED)) {
|
|
PRINTF("PWM: Invalid PWM values\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
if(!pwm_configured(timer, ab)) {
|
|
PRINTF("PWM: GPTn not configured as PWM\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
gpt_dir = (ab == PWM_TIMER_B) ? GPTIMER_CTL_TBPWML : GPTIMER_CTL_TAPWML;
|
|
if(dir) {
|
|
REG(gpt_base + GPTIMER_CTL) |= gpt_dir;
|
|
} else {
|
|
REG(gpt_base + GPTIMER_CTL) &= ~gpt_dir;
|
|
}
|
|
|
|
PRINTF("PWM: Signal direction (%u) -> Timer %u (%u)\n", dir, timer, ab);
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_toggle_direction(uint8_t timer, uint8_t ab)
|
|
{
|
|
uint32_t gpt_base, gpt_dir;
|
|
|
|
if((ab > PWM_TIMER_B) || (timer < PWM_TIMER_MIN) ||
|
|
(timer > PWM_TIMER_MAX)) {
|
|
PRINTF("PWM: Invalid PWM values\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
if(!pwm_configured(timer, ab)) {
|
|
PRINTF("PWM: GPTn not configured as PWM\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
gpt_dir = (ab == PWM_TIMER_B) ? GPTIMER_CTL_TBPWML : GPTIMER_CTL_TAPWML;
|
|
if(REG(gpt_base + GPTIMER_CTL) & gpt_dir) {
|
|
REG(gpt_base + GPTIMER_CTL) &= ~gpt_dir;
|
|
} else {
|
|
REG(gpt_base + GPTIMER_CTL) |= gpt_dir;
|
|
}
|
|
|
|
PRINTF("PWM: direction toggled -> Timer %u (%u)\n", timer, ab);
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int8_t
|
|
pwm_disable(uint8_t timer, uint8_t ab, uint8_t port, uint8_t pin)
|
|
{
|
|
uint32_t gpt_base;
|
|
uint8_t offset = (ab == PWM_TIMER_B) ? 4 : 0;
|
|
gpt_base = PWM_GPTIMER_NUM_TO_BASE(timer);
|
|
|
|
if((ab > PWM_TIMER_B) || (timer < PWM_TIMER_MIN) ||
|
|
(timer > PWM_TIMER_MAX)) {
|
|
PRINTF("PWM: Invalid PWM values\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* CC2538 has 4 ports (A-D) and up to 8 pins (0-7) */
|
|
if((port > GPIO_D_NUM) || (pin > 7)) {
|
|
PRINTF("PWM: Invalid pin/port settings\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
if(!pwm_configured(timer, ab)) {
|
|
PRINTF("PWM: GPTn not configured as PWM\n");
|
|
return PWM_ERROR;
|
|
}
|
|
|
|
/* Stop the PWM */
|
|
pwm_stop(timer, ab, port, pin, PWM_OFF_WHEN_STOP);
|
|
/* Disable the PWM mode */
|
|
REG(gpt_base + (GPTIMER_TAMR + offset)) = 0;
|
|
/* Restart the interval load and deassert values */
|
|
REG(gpt_base + (GPTIMER_TAILR + offset)) = 0;
|
|
REG(gpt_base + (GPTIMER_TAMATCHR + offset)) = 0;
|
|
|
|
/* Configure the port/pin as GPIO, input */
|
|
ioc_set_over(port, pin, IOC_OVERRIDE_DIS);
|
|
GPIO_SOFTWARE_CONTROL(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
GPIO_SET_INPUT(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
|
|
return PWM_SUCCESS;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @} */
|