osd-contiki/platform/zoul/dev/rtcc-config.h

102 lines
3.9 KiB
C

/*
* Copyright (c) 2015, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/* -------------------------------------------------------------------------- */
/**
* \addtogroup remote-rtcc
* @{
*
* Driver for the RE-Mote RTCC (Real Time Clock Calendar)
* @{
*
* \file
* RTCC configuration file
*
* \author
*
* Antonio Lignan <alinan@zolertia.com>
* Aitor Mejias <amejias@zolertia.com>
* Toni Lozano <tlozano@zolertia.com>
*/
/* -------------------------------------------------------------------------- */
#ifndef RTCC_CONFIG_H_
#define RTCC_CONFIG_H_
/* -------------------------------------------------------------------------- */
#include "rtcc.h"
/* -------------------------------------------------------------------------- */
/**
* \name RTCC configuration macros
* @{
*/
#define RTCC_SET_DEFAULT_CONFIG 1
#define RTCC_CLEAR_INT_MANUALLY 1
#define RTCC_SET_AUTOCAL 1
/** @} */
/* -------------------------------------------------------------------------- */
/**
* \name RTCC default configuration (if enabled by RTCC_SET_DEFAULT_CONFIG)
* @{
*/
/* Reset values from the Application Manual */
#define RTCC_DEFAULT_STATUS 0x00
#define RTCC_DEFAULT_CTRL1 0x11
#define RTCC_DEFAULT_CTRL2 0x00
#define RTCC_DEFAULT_INTMASK 0xE0
#define RTCC_DEFAULT_SQW 0x26
#define RTCC_DEFAULT_TIMER_CTRL 0x23
/** @} */
/* -------------------------------------------------------------------------- */
/**
* \name RTCC default configuration structure
* @{
*/
typedef struct ab080x_register_config {
uint8_t reg;
uint8_t val;
} ab080x_register_config_t;
/* -------------------------------------------------------------------------- */
static const ab080x_register_config_t ab080x_default_setting[] =
{
{ (CONFIG_MAP_OFFSET + STATUS_ADDR), RTCC_DEFAULT_STATUS },
{ (CONFIG_MAP_OFFSET + CTRL_1_ADDR), RTCC_DEFAULT_CTRL1 },
{ (CONFIG_MAP_OFFSET + CTRL_2_ADDR), RTCC_DEFAULT_CTRL2 },
{ (CONFIG_MAP_OFFSET + INT_MASK_ADDR), RTCC_DEFAULT_INTMASK },
{ (CONFIG_MAP_OFFSET + SQW_ADDR), RTCC_DEFAULT_SQW },
{ (CONFIG_MAP_OFFSET + TIMER_CONTROL_ADDR), RTCC_DEFAULT_TIMER_CTRL },
};
/** @} */
/* -------------------------------------------------------------------------- */
#endif /* ifndef RTCC_CONFIG_H_ */
/* -------------------------------------------------------------------------- */
/**
* @}
* @}
*/