a5046e83c7
This is a general cleanup of things like code style issues and code structure of the STM32w port to make it more like the rest of Contiki is structured.
125 lines
3.5 KiB
C
125 lines
3.5 KiB
C
/** @file hal/micro/mems-regs.h
|
|
* @brief stm32w108 mems registers
|
|
*
|
|
* <!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
|
|
*/
|
|
|
|
#ifndef _MEMS_REGS_H_
|
|
#define _MEMS_REGS_H_
|
|
|
|
//---Size of MEMs data---
|
|
#define MEMS_DATA_SIZE 6
|
|
|
|
//---address of slave I want to communicate with---
|
|
#define kLIS3L02DQ_SLAVE_ADDR 0x38
|
|
|
|
//-----------------------------------------------------------------------------
|
|
//---accelerometer register addresses---
|
|
#define OFFSET_X 0x16
|
|
#define OFFSET_Y 0x17
|
|
#define OFFSET_Z 0x18
|
|
#define GAIN_X 0x19
|
|
#define GAIN_Y 0x1A
|
|
#define GAIN_Z 0x1B
|
|
#define CTRL_REG1 0x20
|
|
#define CTRL_REG2 0x21
|
|
#define STATUS_REG 0x27
|
|
#define OUTX_L 0x28
|
|
#define OUTX_H 0x29
|
|
#define OUTY_L 0x2A
|
|
#define OUTY_H 0x2B
|
|
#define OUTZ_L 0x2C
|
|
#define OUTZ_H 0x2D
|
|
#define FF_WU_CFG 0x30
|
|
#define FF_WU_SRC 0x31
|
|
#define FF_WU_ACK 0x32
|
|
#define FF_WU_THS_L 0x34
|
|
#define FF_WU_THS_H 0x35
|
|
#define FF_WU_DURATION 0x36
|
|
#define DD_CFG 0x38
|
|
#define DD_SRC 0x39
|
|
#define DD_ACK 0x3A
|
|
#define DD_THSI_L 0x3C
|
|
#define DD_THSI_H 0x3D
|
|
#define DD_THSE_L 0x3E
|
|
#define DD_THSE_H 0x3F
|
|
|
|
// Communication control settings
|
|
// I2C
|
|
#define REPETIR 0x80
|
|
// SPI
|
|
#define MEMS_SPI_WRITE 0x00
|
|
#define MEMS_SPI_READ 0x80
|
|
#define MEMS_SPI_MULTIPLE_BYTES 0x40
|
|
|
|
//-----------------------------------------------------------------------------
|
|
//---Settings for CTRL_REG1---
|
|
|
|
// Power Down Control (PD)
|
|
#define LIS_PD_OFF 0x00
|
|
#define LIS_PD_ON 0x40
|
|
|
|
// Decimation Factor Control (DF)
|
|
#define LIS_DF_BY128 0x00
|
|
#define LIS_DF_BY64 0x10
|
|
#define LIS_DF_BY32 0x20
|
|
#define LIS_DF_BY8 0x30
|
|
|
|
// Self Test
|
|
#define LIS_ST_NORMAL 0x00
|
|
#define LIS_ST_TEST 0x08
|
|
|
|
// Enable Axis
|
|
#define LIS_EA_ALL 0x07
|
|
|
|
//-----------------------------------------------------------------------------
|
|
//---Settings for CTRL_REG2---
|
|
|
|
// Full Scale (FS)
|
|
#define LIS_FS_2G 0x00
|
|
#define LIS_FS_6G 0x80
|
|
|
|
// Block Data Update (BDU)
|
|
#define LIS_BDU_CONTINUOUS 0x00
|
|
#define LIS_BDU_WAIT 0x40
|
|
|
|
// Big/Little Endian Selection (BLE)
|
|
#define LIS_BLE_LE 0x00
|
|
#define LIS_BLE_BE 0x20
|
|
|
|
// Data Alignment Selection DAS
|
|
#define LIS_DAS_12BIT 0x00
|
|
#define LIS_DAS_16BIT 0x01
|
|
|
|
// Interrupt Enable
|
|
#define LIS_INTR_DISABLE 0x00
|
|
#define LIS_INTR_ENABLE 0x08
|
|
|
|
// Data Ready Enable
|
|
#define LIS_DRDY_DISABLE 0x00
|
|
#define LIS_DRDY_ENABLE 0x04
|
|
|
|
//-----------------------------------------------------------------------------
|
|
|
|
#define LIS_BLE_XX LIS_BLE_BE
|
|
|
|
|
|
/* Private Functions Prototypes ----------------------------------------------*/
|
|
|
|
//*********************i2c_read_reg***********************//
|
|
//----------Reads a register on the I2C target------------//
|
|
//------slave addr is the is the I2C target device--------//
|
|
//-reg_addr is the address of the register to be written--//
|
|
//-pBuffer is the storage destination for the read data---//
|
|
//-NoOfBytes is the amount of data to read----------------//
|
|
uint8_t i2c_read_reg (uint8_t slave_addr, uint8_t reg_addr, uint8_t *pBuffer, uint8_t NoOfBytes);
|
|
|
|
//*********************i2c_write_reg**********************//
|
|
//----------Writes a register on the I2C target-----------//
|
|
//------slave addr is the is the I2C target device--------//
|
|
//-reg_addr is the address of the register to be written--//
|
|
//-reg_value is the value of the register to be written---//
|
|
uint8_t i2c_write_reg (uint8_t slave_addr, uint8_t reg_addr, uint8_t reg_value);
|
|
|
|
#endif /* _MEMS_REGS_H_ */
|
|
|