04bbba6c12
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
105 lines
3.5 KiB
C
105 lines
3.5 KiB
C
#ifndef PARAMS_H_
|
|
#define PARAMS_H_
|
|
/* PARAMETER_STORAGE =
|
|
* 0 Hard coded, minmal program and eeprom usage.
|
|
* 1 Stored in fixed eeprom locations, rewritten from flash if corrupt.
|
|
* This allows parameter changes using a hardware programmer or custom application code.
|
|
* Corruption test is based on channel verify so get the channel before anything else!
|
|
* 2 Obtained from eeprom using the general settings manager and read from program flash if not present.
|
|
* Useful for for testing builds without wearing out flash memory.
|
|
* 3 Obtained from eeprom using the settings manager and rewritten from flash if not present.
|
|
* This ensures all parameters are present in upper eeprom flash.
|
|
*
|
|
* Note the parameters in this file can be changed without forcing a complete rebuild.
|
|
*/
|
|
// default settings
|
|
#define CHANNEL_802_15_4 25 // default frequency (11-26)
|
|
|
|
// end default settings
|
|
|
|
#define CONTIKI_CONF_RANDOM_MAC 0 //adds 78 bytes
|
|
#define CONTIKI_CONF_SETTINGS_MANAGER 0 //adds 1696 bytes
|
|
#define BOOTLOADER_GET_MAC 0x0003ff80 // get mac from bootloader
|
|
|
|
#if CONTIKI_CONF_SETTINGS_MANAGER
|
|
//#define PARAMETER_STORAGE 2
|
|
#define PARAMETER_STORAGE 2
|
|
#else
|
|
#define PARAMETER_STORAGE 0 // 0:get mac from booloader (see above)
|
|
#endif
|
|
|
|
/* Include settings.h, then dummy out the write routines */
|
|
#include "settings.h"
|
|
#if PARAMETER_STORAGE==2
|
|
#define settings_add(...) 0
|
|
#define settings_add_uint8(...) 0
|
|
#define settings_add_uint16(...) 0
|
|
#endif
|
|
|
|
#if AVR_WEBSERVER
|
|
/* Webserver builds can set some defaults in httpd-fsdata.c via makefsdata.h */
|
|
extern uint8_t eemem_mac_address[8];
|
|
extern uint8_t eemem_server_name[16];
|
|
extern uint8_t eemem_domain_name[30];
|
|
#endif
|
|
#ifdef SERVER_NAME
|
|
#define PARAMS_SERVERNAME SERVER_NAME
|
|
#else
|
|
#define PARAMS_SERVERNAME "ATMEGA256rfr2"
|
|
#endif
|
|
#ifdef DOMAIN_NAME
|
|
#define PARAMS_DOMAINNAME DOMAIN_NAME
|
|
#else
|
|
#define PARAMS_DOMAINNAME "localhost"
|
|
#endif
|
|
#ifdef NODE_ID
|
|
#define PARAMS_NODEID NODE_ID
|
|
#else
|
|
#define PARAMS_NODEID 0
|
|
#endif
|
|
#ifdef IEEE802154_PANADDR
|
|
#define PARAMS_PANADDR IEEE802154_PANADDR
|
|
#else
|
|
#define PARAMS_PANADDR 0
|
|
#endif
|
|
#ifdef RF230_MAX_TX_POWER
|
|
#define PARAMS_TXPOWER RF230_MAX_TX_POWER
|
|
#else
|
|
#define PARAMS_TXPOWER 0
|
|
#endif
|
|
#ifdef EUI64_ADDRESS
|
|
#define PARAMS_EUI64ADDR EUI64_ADDRESS
|
|
#else
|
|
/* This form of of EUI64 mac allows full 6LoWPAN header compression from mac address */
|
|
#if UIP_CONF_LL_802154
|
|
//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN}
|
|
//#define PARAMS_EUI64ADDR {0x00, 0x21, 0x2e, 0xff, 0xff, 0x00, 0x1E, 0xFB}
|
|
#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x11}
|
|
#else
|
|
//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xff, 0xfe, 0xNN, 0xNN, 0xNN}
|
|
#define PARAMS_EUI64ADDR {0x00, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x03}
|
|
#endif
|
|
/* This form of of EUI64 mac allows 16 bit 6LoWPAN header compression on multihops */
|
|
//#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0xNN, 0xNN}
|
|
#endif
|
|
|
|
uint8_t params_get_eui64(uint8_t *eui64);
|
|
#if PARAMETER_STORAGE==0
|
|
/* Hard coded program flash parameters */
|
|
#define params_get_servername(...)
|
|
#define params_get_nodeid(...) PARAMS_NODEID
|
|
#define params_get_channel(...) CHANNEL_802_15_4
|
|
#define params_get_panid(...) IEEE802154_PANID
|
|
#define params_get_panaddr(...) PARAMS_PANADDR
|
|
#define params_get_txpower(...) PARAMS_TXPOWER
|
|
#else
|
|
/* Parameters stored in eeprom */
|
|
uint16_t params_get_nodeid(void);
|
|
uint8_t params_get_channel(void);
|
|
uint16_t params_get_panid(void);
|
|
uint16_t params_get_panaddr(void);
|
|
uint8_t params_get_txpower(void);
|
|
#endif
|
|
|
|
#endif /* PARAMS_H_ */
|