381 lines
11 KiB
C
381 lines
11 KiB
C
/** @file cpu/stm32w108/hal/micro/cortexm3/adc.c
|
|
* @brief ADC HAL functions
|
|
*
|
|
* <!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
|
|
*/
|
|
#include PLATFORM_HEADER
|
|
#include "hal/error.h"
|
|
#include "hal/hal.h"
|
|
#include "hal/micro/adc.h"
|
|
|
|
|
|
#if (NUM_ADC_USERS > 8)
|
|
#error NUM_ADC_USERS must not be greater than 8, or uint8_t variables in adc.c must be changed
|
|
#endif
|
|
|
|
static uint16_t adcData; // conversion result written by DMA
|
|
static uint8_t adcPendingRequests; // bitmap of pending requests
|
|
volatile static uint8_t adcPendingConversion; // id of pending conversion
|
|
static uint8_t adcReadingValid; // bitmap of valid adcReadings
|
|
static uint16_t adcReadings[NUM_ADC_USERS];
|
|
static uint16_t adcConfig[NUM_ADC_USERS];
|
|
static boolean adcCalibrated;
|
|
static int16_t Nvss;
|
|
static int16_t Nvdd;
|
|
/* Modified the original ADC driver for enabling the ADC extended range mode required for
|
|
supporting the STLM20 temperature sensor.
|
|
NOTE:
|
|
The ADC extended range is inaccurate due to the high voltage mode bug of the general purpose ADC
|
|
(see STM32W108 errata). As consequence, it is not reccomended to use this ADC driver for getting
|
|
the temperature values
|
|
*/
|
|
#ifdef ENABLE_ADC_EXTENDED_RANGE_BROKEN
|
|
static int16_t Nvref;
|
|
static int16_t Nvref2;
|
|
#endif /* ENABLE_ADC_EXTENDED_RANGE_BROKEN */
|
|
static uint16_t adcStaticConfig;
|
|
|
|
void halAdcSetClock(boolean slow)
|
|
{
|
|
if (slow) {
|
|
adcStaticConfig |= ADC_1MHZCLK_MASK;
|
|
} else {
|
|
adcStaticConfig &= ~ADC_1MHZCLK_MASK;
|
|
}
|
|
}
|
|
|
|
void halAdcSetRange(boolean high)
|
|
{
|
|
if (high) {
|
|
adcStaticConfig |= (ADC_HVSELP_MASK | ADC_HVSELN_MASK);
|
|
} else {
|
|
adcStaticConfig &= ~(ADC_HVSELP_MASK | ADC_HVSELN_MASK);
|
|
}
|
|
}
|
|
|
|
boolean halAdcGetClock(void)
|
|
{
|
|
/* Fix original function code */
|
|
return (adcStaticConfig & ADC_1MHZCLK_MASK) ? TRUE : FALSE;
|
|
}
|
|
|
|
boolean halAdcGetRange(void)
|
|
{
|
|
/* Fix original function code */
|
|
return (adcStaticConfig & ((ADC_HVSELP_MASK | ADC_HVSELN_MASK))) ? TRUE : FALSE;
|
|
}
|
|
|
|
|
|
|
|
// Define a channel field that combines ADC_MUXP and ADC_MUXN
|
|
#define ADC_CHAN (ADC_MUXP | ADC_MUXN)
|
|
#define ADC_CHAN_BIT ADC_MUXN_BIT
|
|
|
|
void halAdcIsr(void)
|
|
{
|
|
uint8_t i;
|
|
uint8_t conversion = adcPendingConversion; //fix 'volatile' warning; costs no flash
|
|
|
|
// make sure data is ready and the desired conversion is valid
|
|
if ( (INT_ADCFLAG & INT_ADCULDFULL)
|
|
&& (conversion < NUM_ADC_USERS) ) {
|
|
adcReadings[conversion] = adcData;
|
|
adcReadingValid |= BIT(conversion); // mark the reading as valid
|
|
// setup the next conversion if any
|
|
if (adcPendingRequests) {
|
|
for (i = 0; i < NUM_ADC_USERS; i++) {
|
|
if (BIT(i) & adcPendingRequests) {
|
|
adcPendingConversion = i; // set pending conversion
|
|
adcPendingRequests ^= BIT(i); //clear request: conversion is starting
|
|
ADC_CFG = adcConfig[i];
|
|
break; //conversion started, so we're done here (only one at a time)
|
|
}
|
|
}
|
|
} else { // no conversion to do
|
|
ADC_CFG = 0; // disable adc
|
|
adcPendingConversion = NUM_ADC_USERS; //nothing pending, so go "idle"
|
|
}
|
|
}
|
|
INT_ADCFLAG = 0xFFFF;
|
|
asm("DMB");
|
|
}
|
|
|
|
// An internal support routine called from functions below.
|
|
// Returns the user number of the started conversion, or NUM_ADC_USERS
|
|
// otherwise.
|
|
ADCUser startNextConversion()
|
|
{
|
|
uint8_t i;
|
|
|
|
ATOMIC (
|
|
// start the next requested conversion if any
|
|
if (adcPendingRequests && !(ADC_CFG & ADC_ENABLE)) {
|
|
for (i = 0; i < NUM_ADC_USERS; i++) {
|
|
if ( BIT(i) & adcPendingRequests) {
|
|
adcPendingConversion = i; // set pending conversion
|
|
adcPendingRequests ^= BIT(i); // clear request
|
|
ADC_CFG = adcConfig[i]; // set the configuration to desired
|
|
INT_ADCFLAG = 0xFFFF;
|
|
INT_CFGSET = INT_ADC;
|
|
break; //see DDTS MBTst38936
|
|
}
|
|
}
|
|
} else {
|
|
i = NUM_ADC_USERS;
|
|
}
|
|
)
|
|
return i;
|
|
}
|
|
|
|
void halInternalInitAdc(void)
|
|
{
|
|
// reset the state variables
|
|
adcPendingRequests = 0;
|
|
adcPendingConversion = NUM_ADC_USERS;
|
|
adcCalibrated = FALSE;
|
|
adcStaticConfig = ADC_1MHZCLK | ADC_ENABLE; // init config: 1MHz, low voltage
|
|
|
|
// set all adcReadings as invalid
|
|
adcReadingValid = 0;
|
|
|
|
// turn off the ADC
|
|
ADC_CFG = 0; // disable ADC, turn off HV buffers
|
|
ADC_OFFSET = ADC_OFFSET_RESET;
|
|
ADC_GAIN = ADC_GAIN_RESET;
|
|
ADC_DMACFG = ADC_DMARST;
|
|
ADC_DMABEG = (uint32_t)&adcData;
|
|
ADC_DMASIZE = 1;
|
|
ADC_DMACFG = (ADC_DMAAUTOWRAP | ADC_DMALOAD);
|
|
|
|
// clear the ADC interrupts and enable
|
|
INT_ADCCFG = INT_ADCULDFULL;
|
|
INT_ADCFLAG = 0xFFFF;
|
|
INT_CFGSET = INT_ADC;
|
|
|
|
stCalibrateVref();
|
|
}
|
|
|
|
StStatus halStartAdcConversion(ADCUser id,
|
|
ADCReferenceType reference,
|
|
ADCChannelType channel,
|
|
ADCRateType rate)
|
|
{
|
|
|
|
if(reference != ADC_REF_INT)
|
|
return ST_ERR_FATAL;
|
|
|
|
// save the chosen configuration for this user
|
|
adcConfig[id] = ( ((rate << ADC_PERIOD_BIT) & ADC_PERIOD)
|
|
| ((channel << ADC_CHAN_BIT) & ADC_CHAN)
|
|
| adcStaticConfig);
|
|
|
|
// if the user already has a pending request, overwrite params
|
|
if (adcPendingRequests & BIT(id)) {
|
|
return ST_ADC_CONVERSION_DEFERRED;
|
|
}
|
|
|
|
ATOMIC (
|
|
// otherwise, queue the transaction
|
|
adcPendingRequests |= BIT(id);
|
|
// try and start the conversion if there is not one happening
|
|
adcReadingValid &= ~BIT(id);
|
|
)
|
|
if (startNextConversion() == id)
|
|
return ST_ADC_CONVERSION_BUSY;
|
|
else
|
|
return ST_ADC_CONVERSION_DEFERRED;
|
|
}
|
|
|
|
StStatus halRequestAdcData(ADCUser id, uint16_t *value)
|
|
{
|
|
//Both the ADC interrupt and the global interrupt need to be enabled,
|
|
//otherwise the ADC ISR cannot be serviced.
|
|
boolean intsAreOff = ( INTERRUPTS_ARE_OFF()
|
|
|| !(INT_CFGSET & INT_ADC)
|
|
|| !(INT_ADCCFG & INT_ADCULDFULL) );
|
|
StStatus stat;
|
|
|
|
ATOMIC (
|
|
// If interupts are disabled but the flag is set,
|
|
// manually run the isr...
|
|
//FIXME -= is this valid???
|
|
if( intsAreOff
|
|
&& ( (INT_CFGSET & INT_ADC) && (INT_ADCCFG & INT_ADCULDFULL) )) {
|
|
halAdcIsr();
|
|
}
|
|
|
|
// check if we are done
|
|
if (BIT(id) & adcReadingValid) {
|
|
*value = adcReadings[id];
|
|
adcReadingValid ^= BIT(id);
|
|
stat = ST_ADC_CONVERSION_DONE;
|
|
} else if (adcPendingRequests & BIT(id)) {
|
|
stat = ST_ADC_CONVERSION_DEFERRED;
|
|
} else if (adcPendingConversion == id) {
|
|
stat = ST_ADC_CONVERSION_BUSY;
|
|
} else {
|
|
stat = ST_ADC_NO_CONVERSION_PENDING;
|
|
}
|
|
)
|
|
return stat;
|
|
}
|
|
|
|
StStatus halReadAdcBlocking(ADCUser id, uint16_t *value)
|
|
{
|
|
StStatus stat;
|
|
|
|
do {
|
|
stat = halRequestAdcData(id, value);
|
|
if (stat == ST_ADC_NO_CONVERSION_PENDING)
|
|
break;
|
|
} while(stat != ST_ADC_CONVERSION_DONE);
|
|
return stat;
|
|
}
|
|
|
|
StStatus halAdcCalibrate(ADCUser id)
|
|
{
|
|
StStatus stat;
|
|
/* Modified the original ADC driver for enabling the ADC extended range mode required for
|
|
supporting the STLM20 temperature sensor.
|
|
NOTE:
|
|
The ADC extended range is inaccurate due to the high voltage mode bug of the general purpose ADC
|
|
(see STM32W108 errata). As consequence, it is not reccomended to use this ADC driver for getting
|
|
the temperature values
|
|
*/
|
|
#ifdef ENABLE_ADC_EXTENDED_RANGE_BROKEN
|
|
if(halAdcGetRange()){
|
|
|
|
halStartAdcConversion(id,
|
|
ADC_REF_INT,
|
|
ADC_SOURCE_VREF_VREF2,
|
|
ADC_CONVERSION_TIME_US_4096);
|
|
|
|
stat = halReadAdcBlocking(id, (uint16_t *)(&Nvref));
|
|
if (stat == ST_ADC_CONVERSION_DONE) {
|
|
halStartAdcConversion(id,
|
|
ADC_REF_INT,
|
|
ADC_SOURCE_VREF2_VREF2,
|
|
ADC_CONVERSION_TIME_US_4096);
|
|
stat = halReadAdcBlocking(id, (uint16_t *)(&Nvref2));
|
|
}
|
|
if (stat == ST_ADC_CONVERSION_DONE) {
|
|
adcCalibrated = TRUE;
|
|
} else {
|
|
adcCalibrated = FALSE;
|
|
stat = ST_ERR_FATAL;
|
|
}
|
|
return stat;
|
|
|
|
}
|
|
#endif /* ENABLE_ADC_EXTENDED_RANGE_BROKEN */
|
|
halStartAdcConversion(id,
|
|
ADC_REF_INT,
|
|
ADC_SOURCE_GND_VREF2,
|
|
ADC_CONVERSION_TIME_US_4096);
|
|
stat = halReadAdcBlocking(id, (uint16_t *)(&Nvss));
|
|
if (stat == ST_ADC_CONVERSION_DONE) {
|
|
halStartAdcConversion(id,
|
|
ADC_REF_INT,
|
|
ADC_SOURCE_VREG2_VREF2,
|
|
ADC_CONVERSION_TIME_US_4096);
|
|
stat = halReadAdcBlocking(id, (uint16_t *)(&Nvdd));
|
|
}
|
|
if (stat == ST_ADC_CONVERSION_DONE) {
|
|
Nvdd -= Nvss;
|
|
adcCalibrated = TRUE;
|
|
} else {
|
|
adcCalibrated = FALSE;
|
|
stat = ST_ERR_FATAL;
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
// Use the ratio of the sample reading to the of VDD_PADSA/2, known to be 900mV,
|
|
// to convert to 100uV units.
|
|
// FIXME: support external Vref
|
|
// use #define of Vref, ignore VDD_PADSA
|
|
// FIXME: support high voltage range
|
|
// use Vref-Vref/2 to calibrate
|
|
// FIXME: check for mfg token specifying measured VDD_PADSA
|
|
int16_t halConvertValueToVolts(uint16_t value)
|
|
{
|
|
int32_t N;
|
|
int16_t V;
|
|
int32_t nvalue;
|
|
|
|
if (!adcCalibrated) {
|
|
halAdcCalibrate(ADC_USER_LQI);
|
|
}
|
|
if (adcCalibrated) {
|
|
/* Modified the original ADC driver for enabling the ADC extended range mode required for
|
|
supporting the STLM20 temperature sensor.
|
|
NOTE:
|
|
The ADC extended range is inaccurate due to the high voltage mode bug of the general purpose ADC
|
|
(see STM32W108 errata). As consequence, it is not reccomended to use this ADC driver for getting
|
|
the temperature values
|
|
*/
|
|
#ifdef ENABLE_ADC_EXTENDED_RANGE_BROKEN
|
|
if(halAdcGetRange()){ // High range.
|
|
|
|
N = (((int32_t)value + Nvref - 2*Nvref2) << 16)/(2*(Nvref-Nvref2));
|
|
// Calculate voltage with: V = (N * VREF) / (2^16) where VDD = 1.2 volts
|
|
// Mutiplying by 1.2*10000 makes the result of this equation 100 uVolts
|
|
V = (int16_t)((N*12000L) >> 16);
|
|
if (V > 21000) { // VDD_PADS ?
|
|
V = 21000;
|
|
}
|
|
|
|
}
|
|
else {
|
|
#endif /* ENABLE_ADC_EXTENDED_RANGE_BROKEN */
|
|
assert(Nvdd);
|
|
nvalue = value - Nvss;
|
|
// Convert input value (minus ground) to a fraction of VDD/2.
|
|
N = ((nvalue << 16) + Nvdd/2) / Nvdd;
|
|
// Calculate voltage with: V = (N * VDD/2) / (2^16) where VDD/2 = 0.9 volts
|
|
// Mutiplying by0.9*10000 makes the result of this equation 100 uVolts
|
|
// (in fixed point E-4 which allows for 13.5 bits vs millivolts
|
|
// which is only 10.2 bits).
|
|
V = (int16_t)((N*9000L) >> 16);
|
|
if (V > 12000) {
|
|
V = 12000;
|
|
}
|
|
#ifdef ENABLE_ADC_EXTENDED_RANGE_BROKEN
|
|
}
|
|
#endif /* ENABLE_ADC_EXTENDED_RANGE_BROKEN */
|
|
} else {
|
|
V = -32768;
|
|
}
|
|
return V;
|
|
}
|
|
|
|
uint8_t halGetADCChannelFromGPIO(uint32_t io)
|
|
{
|
|
switch(io)
|
|
{
|
|
case PORTB_PIN(5):
|
|
return ADC_MUX_ADC0;
|
|
|
|
case PORTB_PIN(6):
|
|
return ADC_MUX_ADC1;
|
|
|
|
case PORTB_PIN(7):
|
|
return ADC_MUX_ADC2;
|
|
|
|
case PORTC_PIN(1):
|
|
return ADC_MUX_ADC3;
|
|
|
|
case PORTA_PIN(4):
|
|
return ADC_MUX_ADC4;
|
|
|
|
case PORTA_PIN(5):
|
|
return ADC_MUX_ADC5;
|
|
|
|
case PORTB_PIN(0):
|
|
return ADC_MUX_VREF;
|
|
|
|
default :
|
|
return 0x0F; // Invalid analogue source
|
|
|
|
}
|
|
}
|