171 lines
5 KiB
Plaintext
171 lines
5 KiB
Plaintext
/*
|
|
* Sample arduino sketch using contiki features.
|
|
* We turn the LED off
|
|
* Unfortunately sleeping for long times in loop() isn't currently
|
|
* possible, something turns off the CPU (including PWM outputs) if a
|
|
* Proto-Thread is taking too long. We need to find out how to sleep in
|
|
* a Contiki-compatible way.
|
|
* Note that for a normal arduino sketch you won't have to include any
|
|
* of the contiki-specific files here, the sketch should just work.
|
|
*/
|
|
|
|
/*
|
|
* ------------------------------------------------------------------------------------------------------------$
|
|
* Example sketch/program showing how to read new NUID from a PICC to serial.
|
|
* ------------------------------------------------------------------------------------------------------------$
|
|
* This is a MFRC522 library example; for further details and other examples see: https://github.com/miguelbalb$
|
|
*
|
|
* Example sketch/program showing how to the read data from a PICC (that is: a RFID Tag or Card) using a MFRC52$
|
|
* Reader on the Arduino SPI interface.
|
|
*
|
|
* When the Arduino and the MFRC522 module are connected (see the pin layout below), load this sketch into Ardu$
|
|
* then verify/compile and upload it. To see the output: use Tools, Serial Monitor of the IDE (hit Ctrl+Shft+M)$
|
|
* you present a PICC (that is: a RFID Tag or Card) at reading distance of the MFRC522 Reader/PCD, the serial o$
|
|
* will show the type, and the NUID if a new card has been detected. Note: you may see "Timeout in communicatio$
|
|
* when removing the PICC from reading distance too early.
|
|
*
|
|
* @license Released into the public domain.
|
|
*
|
|
* Typical pin layout used:
|
|
* -------------------------------------
|
|
* MFRC522 Merkurboard
|
|
* Reader/PCD ATmega
|
|
* Signal Pin Pin
|
|
* -------------------------------------
|
|
* RST/Reset RST D14
|
|
* SPI SS SDA(SS) D10
|
|
* SPI MOSI MOSI D11
|
|
* SPI MISO MISO D13
|
|
* SPI SCK SCK D12
|
|
*/
|
|
|
|
extern "C" {
|
|
#include "arduino-process.h"
|
|
#include "rest-engine.h"
|
|
#include "net/netstack.h"
|
|
|
|
extern resource_t
|
|
res_led,
|
|
res_event,
|
|
res_separate,
|
|
res_battery,
|
|
res_cputemp;
|
|
|
|
uint8_t led_pin=4;
|
|
uint8_t led_status;
|
|
}
|
|
|
|
#include <SPI.h>
|
|
#include <MFRC522.h>
|
|
|
|
#define SS_PIN 10
|
|
#define RST_PIN 14
|
|
|
|
MFRC522 rfid(SS_PIN, RST_PIN); // Instance of the class
|
|
|
|
MFRC522::MIFARE_Key key;
|
|
|
|
// Init array that will store new NUID
|
|
byte nuidPICC[4];
|
|
|
|
void setup (void)
|
|
{
|
|
// switch off the led
|
|
pinMode(led_pin, OUTPUT);
|
|
digitalWrite(led_pin, HIGH);
|
|
led_status=0;
|
|
Serial1.begin(38400);
|
|
// RFID Init
|
|
SPI.begin(); // Init SPI bus
|
|
rfid.PCD_Init(); // Init MFRC522
|
|
for (byte i = 0; i < 6; i++) {
|
|
key.keyByte[i] = 0xFF;
|
|
}
|
|
// init coap resourcen
|
|
rest_init_engine ();
|
|
rest_activate_resource (&res_led, "s/led");
|
|
rest_activate_resource (&res_battery, "s/battery");
|
|
rest_activate_resource (&res_cputemp, "s/cputemp");
|
|
rest_activate_resource (&res_event, "s/rfid");
|
|
|
|
// NETSTACK_MAC.off(1);
|
|
}
|
|
|
|
/**
|
|
* Helper routine to dump a byte array as hex values to Serial.
|
|
*/
|
|
void printHex(byte *buffer, byte bufferSize) {
|
|
for (byte i = 0; i < bufferSize; i++) {
|
|
Serial1.print(buffer[i] < 0x10 ? " 0" : " ");
|
|
Serial1.print(buffer[i], HEX);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Helper routine to dump a byte array as dec values to Serial.
|
|
*/
|
|
void printDec(byte *buffer, byte bufferSize) {
|
|
for (byte i = 0; i < bufferSize; i++) {
|
|
Serial1.print(buffer[i] < 0x10 ? " 0" : " ");
|
|
Serial1.print(buffer[i], DEC);
|
|
}
|
|
}
|
|
|
|
void coap_rfid (void)
|
|
{
|
|
/* Call the event_handler for this application-specific event. */
|
|
res_event.trigger();
|
|
|
|
/* Also call the separate response example handler. */
|
|
res_separate.resume();
|
|
}
|
|
|
|
void loop (void)
|
|
{
|
|
// Look for new cards
|
|
if ( ! rfid.PICC_IsNewCardPresent())
|
|
return;
|
|
|
|
// Verify if the NUID has been readed
|
|
if ( ! rfid.PICC_ReadCardSerial())
|
|
return;
|
|
|
|
Serial1.print(F("PICC type: "));
|
|
MFRC522::PICC_Type piccType = rfid.PICC_GetType(rfid.uid.sak);
|
|
Serial1.println(rfid.PICC_GetTypeName(piccType));
|
|
|
|
// Check is the PICC of Classic MIFARE type
|
|
if (piccType != MFRC522::PICC_TYPE_MIFARE_MINI &&
|
|
piccType != MFRC522::PICC_TYPE_MIFARE_1K &&
|
|
piccType != MFRC522::PICC_TYPE_MIFARE_4K) {
|
|
Serial1.println(F("Your tag is not of type MIFARE Classic."));
|
|
return;
|
|
}
|
|
if (rfid.uid.uidByte[0] != nuidPICC[0] ||
|
|
rfid.uid.uidByte[1] != nuidPICC[1] ||
|
|
rfid.uid.uidByte[2] != nuidPICC[2] ||
|
|
rfid.uid.uidByte[3] != nuidPICC[3] ) {
|
|
Serial1.println(F("A new card has been detected."));
|
|
|
|
// Store NUID into nuidPICC array
|
|
for (byte i = 0; i < 4; i++) {
|
|
nuidPICC[i] = rfid.uid.uidByte[i];
|
|
}
|
|
coap_rfid();
|
|
Serial1.println(F("The NUID tag is:"));
|
|
Serial1.print(F("In hex: "));
|
|
printHex(rfid.uid.uidByte, rfid.uid.size);
|
|
Serial1.println();
|
|
Serial1.print(F("In dec: "));
|
|
printDec(rfid.uid.uidByte, rfid.uid.size);
|
|
Serial1.println();
|
|
}
|
|
else Serial1.println(F("Card read previously."));
|
|
|
|
// Halt PICC
|
|
rfid.PICC_HaltA();
|
|
|
|
// Stop encryption on PCD
|
|
rfid.PCD_StopCrypto1();
|
|
}
|