osd-contiki/examples/osd/arduino-dallastemp/Makefile
Ralf Schlatterbeck 04bbba6c12 Multi-platform support, osd-merkur-{128,256}
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00

72 lines
1.9 KiB
Makefile

# Set this to the name of your sketch (without extension .pde)
SKETCH=sketch
EXE=arduino-example
all: $(EXE)
CONTIKI=../../..
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
LFLAGS += -lm
PROJECT_SOURCEFILES += ${SKETCH}.cpp OneWire.cpp DallasTemperature.cpp
# automatically build RESTful resources
REST_RESOURCES_DIR = ./resources
REST_RESOURCES_DIR_COMMON = ../resources-common
REST_RESOURCES_FILES= $(notdir \
$(shell find $(REST_RESOURCES_DIR) -name '*.c') \
$(shell find $(REST_RESOURCES_DIR_COMMON) -name '*.c') \
)
PROJECTDIRS += $(REST_RESOURCES_DIR) $(REST_RESOURCES_DIR_COMMON)
PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)
# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif
# linker optimizations
SMALL=1
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += arduino
include $(CONTIKI)/Makefile.include
include $(CONTIKI)/apps/arduino/Makefile.include
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0
avr-size: $(EXE).$(TARGET).sz
flash: $(EXE).$(TARGET).u $(EXE).$(TARGET).eu
.PHONY: flash avr-size
.PRECIOUS: $(EXE).$(TARGET).hex $(EXE).$(TARGET).eep