301 lines
13 KiB
C
301 lines
13 KiB
C
/*
|
|
* Copyright (c) 2010, Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* Device drivers header file for adxl345 accelerometer in Zolertia Z1.
|
|
* \author
|
|
* Marcus Lundén, SICS <mlunden@sics.se>
|
|
* Enric Calvo, Zolertia <ecalvo@zolertia.com>
|
|
*/
|
|
|
|
#ifndef __ADXL345_H__
|
|
#define __ADXL345_H__
|
|
#include <stdio.h>
|
|
#include "i2cmaster.h"
|
|
|
|
#define DEBUGLEDS 0
|
|
#if DEBUGLEDS
|
|
#undef LEDS_ON(x)
|
|
#undef LEDS_OFF(x)
|
|
#define LEDS_ON(x) (LEDS_PxOUT &= ~x)
|
|
#define LEDS_OFF(x) (LEDS_PxOUT |= x)
|
|
#else
|
|
#undef LEDS_ON
|
|
#undef LEDS_OFF
|
|
#define LEDS_ON(x)
|
|
#define LEDS_OFF(x)
|
|
#endif
|
|
|
|
#define LEDS_R 0x10
|
|
#define LEDS_G 0x40
|
|
#define LEDS_B 0x20
|
|
#define L_ON(x) (LEDS_PxOUT &= ~x)
|
|
#define L_OFF(x) (LEDS_PxOUT |= x)
|
|
|
|
//XXX Temporary place for defines that are lacking in mspgcc4's gpio.h
|
|
#ifndef P1SEL2_
|
|
#define P1SEL2_ 0x0041 /* Port 1 Selection 2 */
|
|
sfrb(P1SEL2, P1SEL2_);
|
|
#endif
|
|
|
|
/* Used in accm_read_axis(), eg accm_read_axis(X_AXIS);*/
|
|
enum ADXL345_AXIS {
|
|
X_AXIS = 0,
|
|
Y_AXIS = 2,
|
|
Z_AXIS = 4,
|
|
};
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/* Init the accelerometer: ports, pins, registers, interrupts (none enabled), I2C,
|
|
default threshold values etc. */
|
|
void accm_init(void);
|
|
|
|
/* Write to a register.
|
|
args:
|
|
reg register to write to
|
|
val value to write
|
|
*/
|
|
void accm_write_reg(u8_t reg, u8_t val);
|
|
|
|
/* Write several registers from a stream.
|
|
args:
|
|
len number of bytes to read
|
|
data pointer to where the data is read from
|
|
First byte in stream must be the register address to begin writing to.
|
|
The data is then written from the second byte and increasing. The address byte
|
|
is not included in length len. */
|
|
void accm_write_stream(u8_t len, u8_t *data);
|
|
|
|
/* Read one register.
|
|
args:
|
|
reg what register to read
|
|
returns the value of the read register
|
|
*/
|
|
u8_t accm_read_reg(u8_t reg);
|
|
|
|
/* Read several registers in a stream.
|
|
args:
|
|
reg what register to start reading from
|
|
len number of bytes to read
|
|
whereto pointer to where the data is saved
|
|
*/
|
|
void accm_read_stream(u8_t reg, u8_t len, u8_t *whereto);
|
|
|
|
/* Read an axis of the accelerometer (x, y or z). Return value is a signed 10 bit int.
|
|
The resolution of the acceleration measurement can be increased up to 13 bit, but
|
|
will change the data format of this read out. Refer to the data sheet if so is
|
|
wanted/needed. */
|
|
int16_t accm_read_axis(enum ADXL345_AXIS axis);
|
|
|
|
/* Sets the g-range, ie the range the accelerometer measures (ie 2g means -2 to +2 g
|
|
on every axis). Possible values:
|
|
ADXL345_RANGE_2G
|
|
ADXL345_RANGE_4G
|
|
ADXL345_RANGE_8G
|
|
ADXL345_RANGE_16G
|
|
Example:
|
|
accm_set_grange(ADXL345_RANGE_4G);
|
|
*/
|
|
void accm_set_grange(u8_t grange);
|
|
|
|
/* Map interrupt (FF, tap, dbltap etc) to interrupt pin (IRQ_INT1, IRQ_INT2).
|
|
This must come after accm_init() as the registers will otherwise be overwritten. */
|
|
void accm_set_irq(uint8_t int1, uint8_t int2);
|
|
|
|
/* Macros for setting the pointers to callback functions from the interrupts.
|
|
The function will be called with an u8_t as parameter, containing the interrupt
|
|
flag register from the ADXL345. That way, several interrupts can be mapped to
|
|
the same pin and be read from the */
|
|
#define ACCM_REGISTER_INT1_CB(ptr) accm_int1_cb = ptr;
|
|
#define ACCM_REGISTER_INT2_CB(ptr) accm_int2_cb = ptr;
|
|
/* -------------------------------------------------------------------------- */
|
|
/* Application definitions, change if required by application. */
|
|
|
|
/* Interrupt suppress periods */
|
|
/*
|
|
// XXX Not used yet.
|
|
#define ADXL345_INT_OVERRUN_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_WATERMARK_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_FREEFALL_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_INACTIVITY_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_ACTIVITY_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_DOUBLETAP_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_TAP_BACKOFF CLOCK_SECOND/8
|
|
#define ADXL345_INT_DATAREADY_BACKOFF CLOCK_SECOND/8
|
|
*/
|
|
/* Time after an interrupt that subsequent interrupts are suppressed. Should later
|
|
be turned into one specific time per type of interrupt (tap, freefall etc) */
|
|
#define SUPPRESS_TIME_INT1 CLOCK_SECOND/4
|
|
#define SUPPRESS_TIME_INT2 CLOCK_SECOND/4
|
|
|
|
/* Suggested defaults according to the data sheet etc */
|
|
#define ADXL345_THRESH_TAP_DEFAULT 0x48 // 4.5g (0x30 == 3.0g) (datasheet: 3g++)
|
|
#define ADXL345_OFSX_DEFAULT 0x00 // for individual units calibration purposes
|
|
#define ADXL345_OFSY_DEFAULT 0x00
|
|
#define ADXL345_OFSZ_DEFAULT 0x00
|
|
#define ADXL345_DUR_DEFAULT 0x20 // 20 ms (datasheet: 10ms++)
|
|
#define ADXL345_LATENT_DEFAULT 0x50 // 100 ms (datasheet: 20ms++)
|
|
#define ADXL345_WINDOW_DEFAULT 0xFF // 320 ms (datasheet: 80ms++)
|
|
#define ADXL345_THRESH_ACT_DEFAULT 0x15 // 1.3g (62.5 mg/LSB)
|
|
#define ADXL345_THRESH_INACT_DEFAULT 0x08 // 0.5g (62.5 mg/LSB)
|
|
#define ADXL345_TIME_INACT_DEFAULT 0x02 // 2 s (1 s/LSB)
|
|
#define ADXL345_ACT_INACT_CTL_DEFAULT 0xFF // all axis involved, ac-coupled
|
|
#define ADXL345_THRESH_FF_DEFAULT 0x09 // 563 mg
|
|
#define ADXL345_TIME_FF_DEFAULT 0x20 // 160 ms
|
|
#define ADXL345_TAP_AXES_DEFAULT 0x07 // all axis, no suppression
|
|
|
|
#define ADXL345_BW_RATE_DEFAULT (0x00|ADXL345_SRATE_100) // 100 Hz, normal operation
|
|
#define ADXL345_POWER_CTL_DEFAULT 0x28 // link bit set, no autosleep, start normal measuring
|
|
#define ADXL345_INT_ENABLE_DEFAULT 0x00 // no interrupts enabled
|
|
#define ADXL345_INT_MAP_DEFAULT 0x00 // all mapped to int_1
|
|
|
|
/* XXX NB: In the data format register, data format of axis readings is chosen
|
|
between left or right justify. This affects the position of the MSB/LSB and is
|
|
different depending on g-range and resolution. If changed, make sure this is
|
|
reflected in the _read_axis() function. Also, the resolution can be increased
|
|
from 10 bit to at most 13 bit, but this also changes position of MSB etc on data
|
|
format so check this in read_axis() too. */
|
|
#define ADXL345_DATA_FORMAT_DEFAULT (0x00|ADXL345_RANGE_2G) // right-justify, 2g, 10-bit mode, int is active high
|
|
#define ADXL345_FIFO_CTL_DEFAULT 0x00 // FIFO bypass mode
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
/* Reference definitions, should not be changed */
|
|
/* adxl345 slave address */
|
|
#define ADXL345_ADDR 0x53
|
|
|
|
/* ADXL345 registers */
|
|
#define ADXL345_DEVID 0x00 // read only
|
|
/* registers 0x01 to 0x1C are reserved, do not access */
|
|
#define ADXL345_THRESH_TAP 0x1D
|
|
#define ADXL345_OFSX 0x1E
|
|
#define ADXL345_OFSY 0x1F
|
|
#define ADXL345_OFSZ 0x20
|
|
#define ADXL345_DUR 0x21
|
|
#define ADXL345_LATENT 0x22
|
|
#define ADXL345_WINDOW 0x23
|
|
#define ADXL345_THRESH_ACT 0x24
|
|
#define ADXL345_THRESH_INACT 0x25
|
|
#define ADXL345_TIME_INACT 0x26
|
|
#define ADXL345_ACT_INACT_CTL 0x27
|
|
#define ADXL345_THRESH_FF 0x28
|
|
#define ADXL345_TIME_FF 0x29
|
|
#define ADXL345_TAP_AXES 0x2A
|
|
#define ADXL345_ACT_TAP_STATUS 0x2B // read only
|
|
#define ADXL345_BW_RATE 0x2C
|
|
#define ADXL345_POWER_CTL 0x2D
|
|
#define ADXL345_INT_ENABLE 0x2E
|
|
#define ADXL345_INT_MAP 0x2F
|
|
#define ADXL345_INT_SOURCE 0x30 // read only
|
|
#define ADXL345_DATA_FORMAT 0x31
|
|
#define ADXL345_DATAX0 0x32 // read only, LSByte X, two's complement
|
|
#define ADXL345_DATAX1 0x33 // read only, MSByte X
|
|
#define ADXL345_DATAY0 0x34 // read only, LSByte Y
|
|
#define ADXL345_DATAY1 0x35 // read only, MSByte X
|
|
#define ADXL345_DATAZ0 0x36 // read only, LSByte Z
|
|
#define ADXL345_DATAZ1 0x37 // read only, MSByte X
|
|
#define ADXL345_FIFO_CTL 0x38
|
|
#define ADXL345_FIFO_STATUS 0x39 // read only
|
|
|
|
/* ADXL345 interrupts */
|
|
#define ADXL345_INT_DISABLE 0X00 // used for disabling interrupts
|
|
#define ADXL345_INT_OVERRUN 0X01
|
|
#define ADXL345_INT_WATERMARK 0X02
|
|
#define ADXL345_INT_FREEFALL 0X04
|
|
#define ADXL345_INT_INACTIVITY 0X08
|
|
#define ADXL345_INT_ACTIVITY 0X10
|
|
#define ADXL345_INT_DOUBLETAP 0X20
|
|
#define ADXL345_INT_TAP 0X40
|
|
#define ADXL345_INT_DATAREADY 0X80
|
|
|
|
/* Accelerometer hardware ports, pins and registers on the msp430 µC */
|
|
#define ADXL345_DIR P1DIR
|
|
#define ADXL345_PIN P1PIN
|
|
#define ADXL345_REN P1REN
|
|
#define ADXL345_SEL P1SEL
|
|
#define ADXL345_SEL2 P1SEL2
|
|
#define ADXL345_INT1_PIN (1<<6) // P1.6
|
|
#define ADXL345_INT2_PIN (1<<7) // P1.7
|
|
#define ADXL345_IES P1IES
|
|
#define ADXL345_IE P1IE
|
|
#define ADXL345_IFG P1IFG
|
|
#define ADXL345_VECTOR PORT1_VECTOR
|
|
|
|
/* g-range for DATA_FORMAT register */
|
|
#define ADXL345_RANGE_2G 0x00
|
|
#define ADXL345_RANGE_4G 0x01
|
|
#define ADXL345_RANGE_8G 0x02
|
|
#define ADXL345_RANGE_16G 0x03
|
|
|
|
|
|
/* The adxl345 has programmable sample rates, but unexpected results may occur if the wrong
|
|
rate and I2C bus speed is used (see datasheet p 17). Sample rates in Hz. This
|
|
setting does not change the internal sampling rate, just how often it is piped
|
|
to the output registers (ie the interrupt features use the full sample rate
|
|
internally).
|
|
|
|
Example use:
|
|
adxl345_set_reg(ADXL345_BW_RATE, ((_ADXL345_STATUS & LOW_POWER) | ADXL345_SRATE_50));
|
|
*/
|
|
#define ADXL345_SRATE_3200 0x0F // XXX NB don't use at all as I2C data rate<= 400kHz (see datasheet)
|
|
#define ADXL345_SRATE_1600 0x0E // XXX NB don't use at all as I2C data rate<= 400kHz (see datasheet)
|
|
#define ADXL345_SRATE_800 0x0D // when I2C data rate == 400 kHz
|
|
#define ADXL345_SRATE_400 0x0C // when I2C data rate == 400 kHz
|
|
#define ADXL345_SRATE_200 0x0B // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_100 0x0A // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_50 0x09 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_25 0x08 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_12_5 0x07 // 12.5 Hz, when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_6_25 0x06 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_3_13 0x05 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_1_56 0x04 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_0_78 0x03 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_0_39 0x02 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_0_20 0x01 // when I2C data rate >= 100 kHz
|
|
#define ADXL345_SRATE_0_10 0x00 // 0.10 Hz, when I2C data rate >= 100 kHz
|
|
|
|
/* Callback pointers for the interrupts */
|
|
void (*accm_int1_cb)(u8_t reg);
|
|
void (*accm_int2_cb)(u8_t reg);
|
|
|
|
/* Interrupt 1 and 2 events; ADXL345 signals interrupt on INT1 or INT2 pins,
|
|
ISR is invoked and polls the accelerometer process which invokes the callbacks. */
|
|
process_event_t int1_event, int2_event; // static ?
|
|
|
|
#define ACCM_INT1 0x01
|
|
#define ACCM_INT2 0x02
|
|
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
#endif /* ifndef __ADXL345_H__ */
|
|
|