osd-contiki/examples/osd/arduino-bmp280/sketch.pde
Harald Pichler 4151c09e2c cleanup code
2017-02-23 22:36:32 +01:00

96 lines
2.5 KiB
Plaintext

/*
* Sample arduino sketch using contiki features.
* We turn the LED off
* We allow read the moisture sensor
* Unfortunately sleeping for long times in loop() isn't currently
* possible, something turns off the CPU (including PWM outputs) if a
* Proto-Thread is taking too long. We need to find out how to sleep in
* a Contiki-compatible way.
* Note that for a normal arduino sketch you won't have to include any
* of the contiki-specific files here, the sketch should just work.
*/
#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP280.h>
extern "C" {
#include "arduino-process.h"
#include "rest-engine.h"
extern resource_t res_bmptemp,res_bmppress,res_bmpatm,res_bmpalt, res_battery;
float bmptemp;
float bmppress;
float bmpatm;
float bmpalt;
char bmptemp_s[8];
char bmppress_s[10];
char bmpatm_s[8];
char bmpalt_s[8];;
#define SEALEVELPRESSURE_HPA (1013.25)
Adafruit_BMP280 bme; // I2C
#define LED_PIN 4
}
void setup (void)
{
bool status;
// switch off the led
pinMode(LED_PIN, OUTPUT);
digitalWrite(LED_PIN, HIGH);
// default settings
status = bme.begin(0x76);
if (!status) {
printf("Could not find a valid BMP280 sensor, check wiring!");
}
// init coap resourcen
rest_init_engine ();
#pragma GCC diagnostic ignored "-Wwrite-strings"
rest_activate_resource (&res_bmptemp, "s/temp");
rest_activate_resource (&res_bmppress, "s/press");
rest_activate_resource (&res_bmpatm, "s/atm");
rest_activate_resource (&res_bmpalt, "s/alt");
rest_activate_resource (&res_battery, "s/battery");
#pragma GCC diagnostic pop
}
// at project-conf.h
// LOOP_INTERVAL (10 * CLOCK_SECOND)
void loop (void)
{
bmptemp = bme.readTemperature();
bmppress = bme.readPressure();
bmpalt = bme.readAltitude(SEALEVELPRESSURE_HPA);
bmpatm = bme.readPressure() / 100.0F;
dtostrf(bmptemp , 6, 2, bmptemp_s );
dtostrf(bmppress , 6, 2, bmppress_s );
dtostrf(bmpalt , 6, 2, bmpalt_s );
dtostrf(bmpatm , 6, 2, bmpatm_s );
// remove space
if(bmptemp_s[0]==' '){
memcpy (bmptemp_s,bmptemp_s+1,strlen(bmptemp_s)+1);
}
if(bmppress_s[0]==' '){
memcpy (bmppress_s,bmppress_s+1,strlen(bmppress_s)+1);
}
if(bmpalt_s[0]==' '){
memcpy (bmpalt_s,bmpalt_s+1,strlen(bmpalt_s)+1);
}
if(bmpatm_s[0]==' '){
memcpy (bmpatm_s,bmpatm_s+1,strlen(bmpatm_s)+1);
}
// Debug Print
printf("Temp: %s\n",bmptemp_s);
printf("Press: %s\n",bmppress_s);
printf("Altitude: %s\n",bmpalt_s);
printf("atm: %s\n",bmpatm_s);
}