103 lines
2.8 KiB
Plaintext
103 lines
2.8 KiB
Plaintext
/*
|
|
* Sample arduino sketch using contiki features.
|
|
* We turn the LED off
|
|
* We allow read the moisture sensor
|
|
* Unfortunately sleeping for long times in loop() isn't currently
|
|
* possible, something turns off the CPU (including PWM outputs) if a
|
|
* Proto-Thread is taking too long. We need to find out how to sleep in
|
|
* a Contiki-compatible way.
|
|
* Note that for a normal arduino sketch you won't have to include any
|
|
* of the contiki-specific files here, the sketch should just work.
|
|
*/
|
|
|
|
#include <OneWire.h>
|
|
#include <DallasEPROM.h>
|
|
|
|
extern "C" {
|
|
|
|
#include "arduino-process.h"
|
|
#include "rest-engine.h"
|
|
#include "sketch.h"
|
|
|
|
extern volatile uint8_t mcusleepcycle; // default 16
|
|
|
|
// Data wire is plugged into port 2 on the Arduino
|
|
#define ONE_WIRE_BUS 3
|
|
|
|
// Setup a oneWire instance to communicate with any OneWire devices
|
|
OneWire oneWire(ONE_WIRE_BUS);
|
|
DallasEPROM de(&oneWire);
|
|
|
|
extern resource_t res_dtemp1, res_dtemp2, res_battery;
|
|
|
|
#define LED_PIN 4
|
|
}
|
|
|
|
|
|
void setup (void)
|
|
{
|
|
// switch off the led
|
|
pinMode(LED_PIN, OUTPUT);
|
|
digitalWrite(LED_PIN, HIGH);
|
|
|
|
printf("Dallas Eprom Control Library Demo");
|
|
|
|
Serial1.begin(38400);
|
|
// init coap resourcen
|
|
rest_init_engine ();
|
|
rest_activate_resource (&res_battery, "s/batter");
|
|
}
|
|
|
|
// at project-conf.h
|
|
// LOOP_INTERVAL (10 * CLOCK_SECOND)
|
|
void loop (void)
|
|
{
|
|
byte buffer[32]; // Holds one page of data
|
|
int status;
|
|
|
|
// Search for the first compatible EPROM/EEPROM on the bus.
|
|
// If you have multiple devices you can use de.setAddress()
|
|
de.search();
|
|
|
|
// Print out the 1-wire device's 64-bit address
|
|
Serial1.print("Address=");
|
|
for(int i = 0; i < 8; i++) {
|
|
Serial1.print(de.getAddress()[i], HEX);
|
|
Serial1.print(" ");
|
|
}
|
|
Serial1.println("");
|
|
|
|
if (de.getAddress()[0] == 0x00) {
|
|
Serial1.println("No device was found!");
|
|
} else {
|
|
if (de.validAddress(de.getAddress())) {
|
|
Serial1.println("Address CRC is correct.");
|
|
|
|
// Uncomment to write to the first page of memory
|
|
//strcpy((char*)buffer, "allthingsgeek.com");
|
|
//if ((status = de.writePage(buffer, 0)) != 0) {
|
|
//sprintf((char*)buffer, "Error writing page! Code: %d", status);
|
|
//Serial1.println((char*)buffer);
|
|
//}
|
|
|
|
// Read the first page of memory into buffer
|
|
if ((status = de.readPage(buffer, 0)) == 0) {
|
|
Serial1.println("Text:");
|
|
Serial1.println((char*)buffer);
|
|
Serial1.println("Hex:");
|
|
for(int i = 0; i < 32; i++) {
|
|
Serial1.print(buffer[i], HEX);
|
|
Serial1.print(" ");
|
|
}
|
|
Serial1.println("");
|
|
} else {
|
|
sprintf((char*)buffer, "Error reading page! Code: %d", status);
|
|
Serial1.println((char*)buffer);
|
|
}
|
|
} else {
|
|
Serial1.println("Address CRC is wrong.");
|
|
}
|
|
}
|
|
Serial1.println("");
|
|
}
|