44 lines
1.5 KiB
Text
44 lines
1.5 KiB
Text
# Sensinode CC2430 platform makefile
|
|
# Supported products: N100, N600, N601, N710, N711
|
|
|
|
# /dev supports defines for product models using the following format
|
|
# e.g. MODEL_N601. Run make TARGET=sensinode DEFINES=MODEL_N601 to
|
|
# automatically configure the correct LED, button, UART etc. settings
|
|
# for that product model. If no model is defined, MODEL_N100 is chosen by default.
|
|
# Models settings are defined in /dev/models.h
|
|
|
|
# make sensinode.upload - Will use nano_programmer to upload file using D2xx Devboard
|
|
# make sensinode.serialdump - Will use the Contiki serialdump tool on the default UART
|
|
|
|
ifndef CONTIKI
|
|
$(error CONTIKI not defined! You must specify where CONTIKI resides!)
|
|
endif
|
|
CFLAGS += -DRIME_CONF_NO_POLITE_ANNOUCEMENTS
|
|
RIME_CONF_NO_POLITE_ANNOUCEMENTS = 1
|
|
|
|
# Define the default UART for tools and tool commands
|
|
DEFUART = /dev/ttyUSB0
|
|
PROG = $(CONTIKI)/tools/sensinode/nano_programmer/nano_programmer -d $(DEFUART)
|
|
SERIALDUMP = $(CONTIKI)/tools/sky/serialdump-linux -b115200 $(DEFUART)
|
|
|
|
CONTIKI_TARGET_DIRS = . dev
|
|
CONTIKI_TARGET_MAIN = ${addprefix $(OBJECTDIR)/,contiki-sesinode-main.o}
|
|
|
|
CONTIKI_TARGET_SOURCEFILES = contiki-sensinode-main.c \
|
|
leds.c leds-arch.c serial-line.c
|
|
|
|
CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
|
|
|
|
.SUFFIXES:
|
|
|
|
%.upload: %.ihx
|
|
$(PROG) -P $<
|
|
|
|
sensinode.serialdump:
|
|
$(SERIALDUMP)
|
|
|
|
### Define the CPU directory
|
|
CONTIKI_CPU=$(CONTIKI)/cpu/cc2430
|
|
include $(CONTIKI)/cpu/cc2430/Makefile.cc2430
|
|
|
|
contiki-$(TARGET).a:# ${addprefix $(OBJECTDIR)/,symbols.o}
|