osd-contiki/platform/avr-ravenusb/contiki-raven-main.c
2010-02-16 22:17:51 +00:00

272 lines
7.8 KiB
C

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$$
*/
/**
* \file
* Sample Contiki kernel for STK 501 development board
*
* \author
* Simon Barner <barner@in.tum.de
*/
#include <avr/pgmspace.h>
#include <avr/fuse.h>
#include <avr/eeprom.h>
#include <util/delay.h>
#include <stdio.h>
#include <string.h>
/* Set ANNOUNCE to send boot messages to USB serial port */
#define ANNOUNCE 1
#if RF230BB //radio driver using contiki core mac
#include "radio/rf230bb/rf230bb.h"
#include "net/mac/frame802154.h"
#include "net/sicslowpan.h"
#include "net/uip-netif.h"
#include "net/mac/lpp.h"
#if WITH_NULLMAC
#define MAC_DRIVER nullmac_driver
#endif /* WITH_NULLMAC */
#ifndef MAC_DRIVER
#ifdef MAC_CONF_DRIVER
#define MAC_DRIVER MAC_CONF_DRIVER
#else
#define MAC_DRIVER sicslowmac_driver
//#define MAC_DRIVER cxmac_driver
#endif /* MAC_CONF_DRIVER */
#endif /* MAC_DRIVER */
#include "net/mac/sicslowmac.h"
#include "net/mac/cxmac.h"
#else //radio driver using Atmel/Cisco 802.15.4'ish MAC
#include <stdbool.h>
#include "mac.h"
#include "sicslowmac.h"
#include "sicslowpan.h"
#include "ieee-15-4-manager.h"
#endif /*RF230BB*/
#include "lib/mmem.h"
#include "loader/symbols-def.h"
#include "loader/symtab.h"
#include "contiki.h"
#include "contiki-net.h"
#include "contiki-lib.h"
#include "contiki-raven.h"
#include "usb_task.h"
#include "serial/cdc_task.h"
#include "rndis/rndis_task.h"
#include "storage/storage_task.h"
#if RF230BB
#warning Experimental RF230BB radio selected
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
extern int rf230_interrupt_flag;
extern uint8_t rf230processflag;
#if 0 //dummy tcpip process not needed?
PROCESS(tcpip_process, "tcpip dummy");
PROCESS_THREAD(tcpip_process, ev, data)
{
PROCESS_BEGIN();
PROCESS_END();
}
void
tcpip_ipv6_output(void)
{
printf("tcpipipv6output");
}
#endif
#endif /* RF230BB */
/*----------------------Configuration of the .elf file---------------------*/
typedef struct {unsigned char B2;unsigned char B1;unsigned char B0;} __signature_t;
#define SIGNATURE __signature_t __signature __attribute__((section (".signature")))
SIGNATURE = {
/* Older AVR-GCCs may not define the SIGNATURE_n bytes so use explicit values */
.B2 = 0x82,//SIGNATURE_2, //AT90USB128x
.B1 = 0x97,//SIGNATURE_1, //128KB flash
.B0 = 0x1E,//SIGNATURE_0, //Atmel
};
FUSES ={.low = 0xde, .high = 0x99, .extended = 0xff,};
/* Put default MAC address in EEPROM */
uint8_t mac_address[8] EEMEM = {0x02, 0x12, 0x13, 0xff, 0xfe, 0x14, 0x15, 0x16};
//uint8_t EEMEM mac_address[8]; //The raven webserver uses this EEMEM allocation
//uint8_t EEMEM server_name[16];
//uint8_t EEMEM domain_name[30];
#if !RF230BB
PROCINIT(&etimer_process, &mac_process);
#else
rimeaddr_t macLongAddr;
//PROCINIT(&etimer_process, &tcpip_process);
PROCINIT(&etimer_process);
#endif
int
main(void)
{
#if ANNOUNCE
uint32_t firsttime=0;
#endif
#if RF230BB
rimeaddr_t addr;
#endif
/*
* GCC depends on register r1 set to 0.
*/
asm volatile ("clr r1");
/* Initialize hardware */
init_lowlevel();
/* Clock */
clock_init();
// printf_P(PSTR("\n\n\n********BOOTING CONTIKI*********\n"));
/* Process subsystem */
process_init();
/* Register initial processes */
procinit_init();
#ifdef RF230BB
{
/* Start radio and radio receive process */
/* Note this starts RF230 process, so must be done after process_init */
rf230_init();
sicslowpan_init(MAC_DRIVER.init(&rf230_driver));
// sicslowpan_init(sicslowmac_init(&rf230_driver));
// sicslowpan_init(lpp_init(&rf230_driver));
// sicslowpan_init(cxmac_init(&rf230_driver));
// ctimer_init();
rtimer_init();
// queuebuf_init();
/* Set addresses BEFORE starting tcpip process */
memset(&addr, 0, sizeof(rimeaddr_t));
AVR_ENTER_CRITICAL_REGION();
eeprom_read_block ((void *)&addr.u8, &mac_address, 8);
AVR_LEAVE_CRITICAL_REGION();
//RNDIS needs the mac address in reverse byte order
macLongAddr.u8[0]=addr.u8[7];
macLongAddr.u8[1]=addr.u8[6];
macLongAddr.u8[2]=addr.u8[5];
macLongAddr.u8[3]=addr.u8[4];
macLongAddr.u8[4]=addr.u8[3];
macLongAddr.u8[5]=addr.u8[2];
macLongAddr.u8[6]=addr.u8[1];
macLongAddr.u8[7]=addr.u8[0];
sei(); //dak - is this necessary?
memcpy(&uip_lladdr.addr, &addr.u8, 8);
rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8); //ABCD is default - dak
rf230_set_channel(24);
rimeaddr_set_node_addr(&addr);
// printf("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
// uip_ip6addr(&ipprefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
// uip_netif_addr_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0, AUTOCONF);
// uip_nd6_prefix_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0);
// PRINTF("Prefix %x::/%u\n",ipprefix.u16[0],UIP_DEFAULT_PREFIX_LEN);
#if UIP_CONF_ROUTER
rime_init(rime_udp_init(NULL));
uip_router_register(&rimeroute);
#endif
// printf("Driver: %s, Channel: %u\n", sicslowmac_driver.name, rf230_get_channel());
}
#endif /*RF230BB*/
/* Setup USB */
process_start(&usb_process, NULL);
process_start(&cdc_process, NULL);
process_start(&rndis_process, NULL);
process_start(&storage_process, NULL);
// printf_P(PSTR("System online.\n"));
//Fix MAC address
init_net();
/* Main scheduler loop */
while(1) {
process_run();
/* Debugging - allow USB CDC to keep up with printfs */
#if ANNOUNCE
if (firsttime++==36000){
printf_P(PSTR("\n\n\n********BOOTING CONTIKI*********\n\r"));
#if RF230BB
} else if (firsttime==40000) {
printf("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n\r",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
} else if (firsttime==44000) {
printf("Driver: %s, Channel: %u\n\r", MAC_DRIVER.name, rf230_get_channel());
#endif
} else if (firsttime==48000) {
printf_P(PSTR("System online.\n\r"));
}
#if DEBUG && 0
if (rf230processflag) {
printf("**RF230 process flag %u\n\r",rf230processflag);
rf230processflag=0;
}
if (rf230_interrupt_flag) {
// if (rf230_interrupt_flag!=11) {
printf("**RF230 Interrupt %u\n\r",rf230_interrupt_flag);
// }
rf230_interrupt_flag=0;
}
#endif /* DEBUG */
#endif /* ANNOUNCE */
}
return 0;
}