osd-contiki/platform/zoul/dev/antenna-sw.h
2016-09-01 15:04:54 +02:00

91 lines
3.6 KiB
C

/*
* Copyright (c) 2015, Zolertia
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* -------------------------------------------------------------------------- */
/**
* \addtogroup remote
* @{
*
* \defgroup remote-antenna RE-Mote Antenna switch
*
* Driver for the RE-Mote RF antenna switch, to enable either the internal
* ceramic antenna or an external one connected to the uFL connector
* @{
*
* \file
* Header file for the RE-Mote RF antenna switch
*/
/* -------------------------------------------------------------------------- */
#ifndef ANTENNA_SW_H_
#define ANTENNA_SW_H_
/* -------------------------------------------------------------------------- */
#include <stdint.h>
/* -------------------------------------------------------------------------- */
#define ANTENNA_SW_SELECT_2_4GHZ 0
#define ANTENNA_SW_SELECT_SUBGHZ (1 << ANTENNA_RF_SW_PIN)
#define ANTENNA_SW_SELECT_ERROR (-1)
/* -------------------------------------------------------------------------- */
/**
* \brief Init function for the antenna switch
*
* The RE-Mote platform allows to programatically select between the 2.4GHz
* RF interface of the CC2538, or the Sub-1GHz RF interface of the CC1200.
* The function is set to enable the Sub-1GHz as default,
* it should be called from the contiki-main initialization process.
*
* \return ignored
*/
void antenna_sw_config(void);
/**
* \brief Function to select between the 2.4GHz or Sub-1GHz RF interface
*
* \param val Select antenna.
* 2.4GHz : ANTENNA_SW_SELECT_2_4GHZ or
* Sub-1GHz: ANTENNA_SW_SELECT_SUBGHZ
* \return the selected antenna position, or ANTENNA_SW_SELECT_ERROR if not
* previously configured
*/
int antenna_sw_select(uint8_t val);
/**
* \brief Function to read the current status of the RF switch
*
*
* \return the selected antenna position, or ANTENNA_SW_SELECT_ERROR if not
* previously configured
*/
int antenna_sw_get(void);
/* -------------------------------------------------------------------------- */
#endif /* ifndef ANTENNA_SW_H_ */
/* -------------------------------------------------------------------------- */
/**
* @}
* @}
*/