osd-contiki/platform/srf06-cc26xx/common/ext-flash.c
George Oikonomou 5eb0470ad4 Move the SPI and Ext Flash Driver to a common directory
This commit creates a `common` directory, aimed to host drivers supported by multiple boards of the CC13xx/CC26xx family.

We move the Sensortag SPI and External Flash drivers to this location and we change the Sensortag build system to pull the  respective files from therein.
2016-01-28 11:23:20 +00:00

451 lines
12 KiB
C

/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup sensortag-cc26xx-ext-flash
* @{
*
* \file
* Driver for the LaunchPad Flash and the Sensortag WinBond W25X20CL/W25X40CL
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "ext-flash.h"
#include "ti-lib.h"
#include "board-spi.h"
/*---------------------------------------------------------------------------*/
/* Instruction codes */
#define BLS_CODE_PROGRAM 0x02 /**< Page Program */
#define BLS_CODE_READ 0x03 /**< Read Data */
#define BLS_CODE_READ_STATUS 0x05 /**< Read Status Register */
#define BLS_CODE_WRITE_ENABLE 0x06 /**< Write Enable */
#define BLS_CODE_SECTOR_ERASE 0x20 /**< Sector Erase */
#define BLS_CODE_MDID 0x90 /**< Manufacturer Device ID */
#define BLS_CODE_PD 0xB9 /**< Power down */
#define BLS_CODE_RPD 0xAB /**< Release Power-Down */
/*---------------------------------------------------------------------------*/
/* Erase instructions */
#define BLS_CODE_ERASE_4K 0x20 /**< Sector Erase */
#define BLS_CODE_ERASE_32K 0x52
#define BLS_CODE_ERASE_64K 0xD8
#define BLS_CODE_ERASE_ALL 0xC7 /**< Mass Erase */
/*---------------------------------------------------------------------------*/
/* Bitmasks of the status register */
#define BLS_STATUS_SRWD_BM 0x80
#define BLS_STATUS_BP_BM 0x0C
#define BLS_STATUS_WEL_BM 0x02
#define BLS_STATUS_WIP_BM 0x01
#define BLS_STATUS_BIT_BUSY 0x01 /**< Busy bit of the status register */
/*---------------------------------------------------------------------------*/
/* Part specific constants */
#define BLS_DEVICE_ID_W25X20CL 0x11
#define BLS_DEVICE_ID_W25X40CL 0x12
#define BLS_DEVICE_ID_MX25R8035F 0x14
#define BLS_WINBOND_MID 0xEF
#define BLS_MACRONIX_MID 0xC2
#define BLS_PROGRAM_PAGE_SIZE 256
#define BLS_ERASE_SECTOR_SIZE 4096
/*---------------------------------------------------------------------------*/
#define VERIFY_PART_ERROR -1
#define VERIFY_PART_POWERED_DOWN 0
#define VERIFY_PART_OK 1
/*---------------------------------------------------------------------------*/
/**
* Clear external flash CSN line
*/
static void
select_on_bus(void)
{
ti_lib_gpio_pin_write(BOARD_FLASH_CS, 0);
}
/*---------------------------------------------------------------------------*/
/**
* Set external flash CSN line
*/
static void
deselect(void)
{
ti_lib_gpio_pin_write(BOARD_FLASH_CS, 1);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Wait till previous erase/program operation completes.
* \return True when successful.
*/
static bool
wait_ready(void)
{
bool ret;
const uint8_t wbuf[1] = { BLS_CODE_READ_STATUS };
select_on_bus();
/* Throw away all garbages */
board_spi_flush();
ret = board_spi_write(wbuf, sizeof(wbuf));
if(ret == false) {
deselect();
return false;
}
for(;;) {
uint8_t buf;
/* Note that this temporary implementation is not
* energy efficient.
* Thread could have yielded while waiting for flash
* erase/program to complete.
*/
ret = board_spi_read(&buf, sizeof(buf));
if(ret == false) {
/* Error */
deselect();
return false;
}
if(!(buf & BLS_STATUS_BIT_BUSY)) {
/* Now ready */
break;
}
}
deselect();
return true;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Verify the flash part.
* \retval VERIFY_PART_OK The part was identified successfully
* \retval VERIFY_PART_ERROR There was an error communicating with the part
* \retval VERIFY_PART_POWERED_DOWN Communication was successful, but the part
* was powered down
*/
static uint8_t
verify_part(void)
{
const uint8_t wbuf[] = { BLS_CODE_MDID, 0xFF, 0xFF, 0x00 };
uint8_t rbuf[2] = { 0, 0 };
bool ret;
select_on_bus();
ret = board_spi_write(wbuf, sizeof(wbuf));
if(ret == false) {
deselect();
return VERIFY_PART_ERROR;
}
ret = board_spi_read(rbuf, sizeof(rbuf));
deselect();
if(ret == false) {
return VERIFY_PART_ERROR;
}
if((rbuf[0] != BLS_WINBOND_MID && rbuf[0] != BLS_MACRONIX_MID) ||
(rbuf[1] != BLS_DEVICE_ID_W25X20CL && rbuf[1] != BLS_DEVICE_ID_W25X40CL
&& rbuf[1] != BLS_DEVICE_ID_MX25R8035F)) {
return VERIFY_PART_POWERED_DOWN;
}
return VERIFY_PART_OK;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Put the device in power save mode. No access to data; only
* the status register is accessible.
*/
static void
power_down(void)
{
uint8_t cmd;
uint8_t i;
/* First, wait for the device to be ready */
if(wait_ready() == false) {
/* Entering here will leave the device in standby instead of powerdown */
return;
}
cmd = BLS_CODE_PD;
select_on_bus();
board_spi_write(&cmd, sizeof(cmd));
deselect();
i = 0;
while(i < 10) {
if(verify_part() == VERIFY_PART_POWERED_DOWN) {
/* Device is powered down */
return;
}
i++;
}
/* Should not be required */
deselect();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Take device out of power save mode and prepare it for normal operation
* \return True if the command was written successfully
*/
static bool
power_standby(void)
{
uint8_t cmd;
bool success;
cmd = BLS_CODE_RPD;
select_on_bus();
success = board_spi_write(&cmd, sizeof(cmd));
if(success) {
success = wait_ready() == true ? true : false;
}
deselect();
return success;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Enable write.
* \return True when successful.
*/
static bool
write_enable(void)
{
bool ret;
const uint8_t wbuf[] = { BLS_CODE_WRITE_ENABLE };
select_on_bus();
ret = board_spi_write(wbuf, sizeof(wbuf));
deselect();
if(ret == false) {
return false;
}
return true;
}
/*---------------------------------------------------------------------------*/
bool
ext_flash_open()
{
board_spi_open(4000000, BOARD_IOID_SPI_CLK_FLASH);
/* GPIO pin configuration */
ti_lib_ioc_pin_type_gpio_output(BOARD_IOID_FLASH_CS);
/* Default output to clear chip select */
deselect();
/* Put the part is standby mode */
power_standby();
return verify_part() == VERIFY_PART_OK ? true : false;
}
/*---------------------------------------------------------------------------*/
void
ext_flash_close()
{
/* Put the part in low power mode */
power_down();
board_spi_close();
}
/*---------------------------------------------------------------------------*/
bool
ext_flash_read(size_t offset, size_t length, uint8_t *buf)
{
uint8_t wbuf[4];
/* Wait till previous erase/program operation completes */
bool ret = wait_ready();
if(ret == false) {
return false;
}
/*
* SPI is driven with very low frequency (1MHz < 33MHz fR spec)
* in this implementation, hence it is not necessary to use fast read.
*/
wbuf[0] = BLS_CODE_READ;
wbuf[1] = (offset >> 16) & 0xff;
wbuf[2] = (offset >> 8) & 0xff;
wbuf[3] = offset & 0xff;
select_on_bus();
if(board_spi_write(wbuf, sizeof(wbuf)) == false) {
/* failure */
deselect();
return false;
}
ret = board_spi_read(buf, length);
deselect();
return ret;
}
/*---------------------------------------------------------------------------*/
bool
ext_flash_write(size_t offset, size_t length, const uint8_t *buf)
{
uint8_t wbuf[4];
bool ret;
size_t ilen; /* interim length per instruction */
while(length > 0) {
/* Wait till previous erase/program operation completes */
ret = wait_ready();
if(ret == false) {
return false;
}
ret = write_enable();
if(ret == false) {
return false;
}
ilen = BLS_PROGRAM_PAGE_SIZE - (offset % BLS_PROGRAM_PAGE_SIZE);
if(length < ilen) {
ilen = length;
}
wbuf[0] = BLS_CODE_PROGRAM;
wbuf[1] = (offset >> 16) & 0xff;
wbuf[2] = (offset >> 8) & 0xff;
wbuf[3] = offset & 0xff;
offset += ilen;
length -= ilen;
/* Upto 100ns CS hold time (which is not clear
* whether it's application only inbetween reads)
* is not imposed here since above instructions
* should be enough to delay
* as much. */
select_on_bus();
if(board_spi_write(wbuf, sizeof(wbuf)) == false) {
/* failure */
deselect();
return false;
}
if(board_spi_write(buf, ilen) == false) {
/* failure */
deselect();
return false;
}
buf += ilen;
deselect();
}
return true;
}
/*---------------------------------------------------------------------------*/
bool
ext_flash_erase(size_t offset, size_t length)
{
/*
* Note that Block erase might be more efficient when the floor map
* is well planned for OTA, but to simplify this implementation,
* sector erase is used blindly.
*/
uint8_t wbuf[4];
bool ret;
size_t i, numsectors;
size_t endoffset = offset + length - 1;
offset = (offset / BLS_ERASE_SECTOR_SIZE) * BLS_ERASE_SECTOR_SIZE;
numsectors = (endoffset - offset + BLS_ERASE_SECTOR_SIZE - 1) / BLS_ERASE_SECTOR_SIZE;
wbuf[0] = BLS_CODE_SECTOR_ERASE;
for(i = 0; i < numsectors; i++) {
/* Wait till previous erase/program operation completes */
ret = wait_ready();
if(ret == false) {
return false;
}
ret = write_enable();
if(ret == false) {
return false;
}
wbuf[1] = (offset >> 16) & 0xff;
wbuf[2] = (offset >> 8) & 0xff;
wbuf[3] = offset & 0xff;
select_on_bus();
if(board_spi_write(wbuf, sizeof(wbuf)) == false) {
/* failure */
deselect();
return false;
}
deselect();
offset += BLS_ERASE_SECTOR_SIZE;
}
return true;
}
/*---------------------------------------------------------------------------*/
bool
ext_flash_test(void)
{
bool ret;
ret = ext_flash_open();
ext_flash_close();
return ret;
}
/*---------------------------------------------------------------------------*/
void
ext_flash_init()
{
ext_flash_open();
ext_flash_close();
}
/*---------------------------------------------------------------------------*/
/** @} */