201 lines
8.2 KiB
C
201 lines
8.2 KiB
C
/*
|
|
* Copyright (c) 2015, SICS Swedish ICT.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* TSCH configuration
|
|
* \author
|
|
* Simon Duquennoy <simonduq@sics.se>
|
|
*/
|
|
|
|
#ifndef __TSCH_CONF_H__
|
|
#define __TSCH_CONF_H__
|
|
|
|
/********** Includes **********/
|
|
|
|
#include "contiki.h"
|
|
|
|
/******** Configuration *******/
|
|
|
|
/* Default IEEE 802.15.4e hopping sequences, obtained from https://gist.github.com/twatteyne/2e22ee3c1a802b685695 */
|
|
/* 16 channels, sequence length 16 */
|
|
#define TSCH_HOPPING_SEQUENCE_16_16 (uint8_t[]){ 16, 17, 23, 18, 26, 15, 25, 22, 19, 11, 12, 13, 24, 14, 20, 21 }
|
|
/* 4 channels, sequence length 16 */
|
|
#define TSCH_HOPPING_SEQUENCE_4_16 (uint8_t[]){ 20, 26, 25, 26, 15, 15, 25, 20, 26, 15, 26, 25, 20, 15, 20, 25 }
|
|
/* 4 channels, sequence length 4 */
|
|
#define TSCH_HOPPING_SEQUENCE_4_4 (uint8_t[]){ 15, 25, 26, 20 }
|
|
/* 2 channels, sequence length 2 */
|
|
#define TSCH_HOPPING_SEQUENCE_2_2 (uint8_t[]){ 20, 25 }
|
|
/* 1 channel, sequence length 1 */
|
|
#define TSCH_HOPPING_SEQUENCE_1_1 (uint8_t[]){ 20 }
|
|
|
|
/* Default hopping sequence, used in case hopping sequence ID == 0 */
|
|
#ifdef TSCH_CONF_DEFAULT_HOPPING_SEQUENCE
|
|
#define TSCH_DEFAULT_HOPPING_SEQUENCE TSCH_CONF_DEFAULT_HOPPING_SEQUENCE
|
|
#else
|
|
#define TSCH_DEFAULT_HOPPING_SEQUENCE TSCH_HOPPING_SEQUENCE_4_4
|
|
#endif
|
|
|
|
/* Hopping sequence used for joining (scan channels) */
|
|
#ifdef TSCH_CONF_JOIN_HOPPING_SEQUENCE
|
|
#define TSCH_JOIN_HOPPING_SEQUENCE TSCH_CONF_JOIN_HOPPING_SEQUENCE
|
|
#else
|
|
#define TSCH_JOIN_HOPPING_SEQUENCE TSCH_DEFAULT_HOPPING_SEQUENCE
|
|
#endif
|
|
|
|
/* Maximum length of the TSCH channel hopping sequence. Must be greater or
|
|
* equal to the length of TSCH_DEFAULT_HOPPING_SEQUENCE. */
|
|
#ifdef TSCH_CONF_HOPPING_SEQUENCE_MAX_LEN
|
|
#define TSCH_HOPPING_SEQUENCE_MAX_LEN TSCH_CONF_HOPPING_SEQUENCE_MAX_LEN
|
|
#else
|
|
#define TSCH_HOPPING_SEQUENCE_MAX_LEN 16
|
|
#endif
|
|
|
|
/* Timeslot timing */
|
|
|
|
#ifndef TSCH_CONF_DEFAULT_TIMESLOT_LENGTH
|
|
#define TSCH_CONF_DEFAULT_TIMESLOT_LENGTH 10000
|
|
#endif /* TSCH_CONF_DEFAULT_TIMESLOT_LENGTH */
|
|
|
|
/* Configurable Rx guard time is micro-seconds */
|
|
#ifndef TSCH_CONF_RX_WAIT
|
|
#define TSCH_CONF_RX_WAIT 2200
|
|
#endif /* TSCH_CONF_RX_WAIT */
|
|
|
|
/* The default timeslot timing in the standard is a guard time of
|
|
* 2200 us, a Tx offset of 2120 us and a Rx offset of 1120 us.
|
|
* As a result, the listening device has a guard time not centered
|
|
* on the expected Tx time. This is to be fixed in the next iteration
|
|
* of the standard. This can be enabled with:
|
|
* #define TSCH_DEFAULT_TS_TX_OFFSET 2120
|
|
* #define TSCH_DEFAULT_TS_RX_OFFSET 1120
|
|
* #define TSCH_DEFAULT_TS_RX_WAIT 2200
|
|
*
|
|
* Instead, we align the Rx guard time on expected Tx time. The Rx
|
|
* guard time is user-configurable with TSCH_CONF_RX_WAIT.
|
|
|
|
* (TS_TX_OFFSET - (TS_RX_WAIT / 2)) instead */
|
|
|
|
#if TSCH_CONF_DEFAULT_TIMESLOT_LENGTH == 10000
|
|
/* Default timeslot timing as per IEEE 802.15.4e */
|
|
|
|
#define TSCH_DEFAULT_TS_CCA_OFFSET 1800
|
|
#define TSCH_DEFAULT_TS_CCA 128
|
|
#define TSCH_DEFAULT_TS_TX_OFFSET 2120
|
|
#define TSCH_DEFAULT_TS_RX_OFFSET (TSCH_DEFAULT_TS_TX_OFFSET - (TSCH_CONF_RX_WAIT / 2))
|
|
#define TSCH_DEFAULT_TS_RX_ACK_DELAY 800
|
|
#define TSCH_DEFAULT_TS_TX_ACK_DELAY 1000
|
|
#define TSCH_DEFAULT_TS_RX_WAIT TSCH_CONF_RX_WAIT
|
|
#define TSCH_DEFAULT_TS_ACK_WAIT 400
|
|
#define TSCH_DEFAULT_TS_RX_TX 192
|
|
#define TSCH_DEFAULT_TS_MAX_ACK 2400
|
|
#define TSCH_DEFAULT_TS_MAX_TX 4256
|
|
#define TSCH_DEFAULT_TS_TIMESLOT_LENGTH 10000
|
|
|
|
#elif TSCH_CONF_DEFAULT_TIMESLOT_LENGTH == 15000
|
|
/* Default timeslot timing for platforms requiring 15ms slots */
|
|
|
|
#define TSCH_DEFAULT_TS_CCA_OFFSET 1800
|
|
#define TSCH_DEFAULT_TS_CCA 128
|
|
#define TSCH_DEFAULT_TS_TX_OFFSET 4000
|
|
#define TSCH_DEFAULT_TS_RX_OFFSET (TSCH_DEFAULT_TS_TX_OFFSET - (TSCH_CONF_RX_WAIT / 2))
|
|
#define TSCH_DEFAULT_TS_RX_ACK_DELAY 3600
|
|
#define TSCH_DEFAULT_TS_TX_ACK_DELAY 4000
|
|
#define TSCH_DEFAULT_TS_RX_WAIT TSCH_CONF_RX_WAIT
|
|
#define TSCH_DEFAULT_TS_ACK_WAIT 800
|
|
#define TSCH_DEFAULT_TS_RX_TX 2072
|
|
#define TSCH_DEFAULT_TS_MAX_ACK 2400
|
|
#define TSCH_DEFAULT_TS_MAX_TX 4256
|
|
#define TSCH_DEFAULT_TS_TIMESLOT_LENGTH 15000
|
|
|
|
#elif TSCH_CONF_DEFAULT_TIMESLOT_LENGTH == 65000U
|
|
/* 65ms timeslot, i.e. nearly the max length allowed by standard (16-bit unsigned in micro-seconds).
|
|
* Useful for running link-layer security on sky or z1 in Cooja, where only S/W security is supported.
|
|
* Note: this slot timing would require a total of 120ms. If a slot overlaps with the next active slot,
|
|
* the latter will be skipped.
|
|
* This configuration is mostly a work-around to test link-layer security in Cooja, it is recommended
|
|
* to use it with a 6TiSCH minimal schedule of length >= 2. */
|
|
|
|
#define TSCH_DEFAULT_TS_CCA_OFFSET 1800
|
|
#define TSCH_DEFAULT_TS_CCA 128
|
|
#define TSCH_DEFAULT_TS_TX_OFFSET 52000
|
|
#define TSCH_DEFAULT_TS_RX_OFFSET (TSCH_DEFAULT_TS_TX_OFFSET - (TSCH_CONF_RX_WAIT / 2))
|
|
#define TSCH_DEFAULT_TS_RX_ACK_DELAY 58600
|
|
#define TSCH_DEFAULT_TS_TX_ACK_DELAY 59000
|
|
#define TSCH_DEFAULT_TS_RX_WAIT TSCH_CONF_RX_WAIT
|
|
#define TSCH_DEFAULT_TS_ACK_WAIT 800
|
|
#define TSCH_DEFAULT_TS_RX_TX 2072
|
|
#define TSCH_DEFAULT_TS_MAX_ACK 2400
|
|
#define TSCH_DEFAULT_TS_MAX_TX 4256
|
|
#define TSCH_DEFAULT_TS_TIMESLOT_LENGTH 65000
|
|
|
|
#else
|
|
#error "TSCH: Unsupported default timeslot length"
|
|
#endif
|
|
|
|
/* A custom feature allowing upper layers to assign packets to
|
|
* a specific slotframe and link */
|
|
#ifdef TSCH_CONF_WITH_LINK_SELECTOR
|
|
#define TSCH_WITH_LINK_SELECTOR TSCH_CONF_WITH_LINK_SELECTOR
|
|
#else /* TSCH_CONF_WITH_LINK_SELECTOR */
|
|
#define TSCH_WITH_LINK_SELECTOR 0
|
|
#endif /* TSCH_CONF_WITH_LINK_SELECTOR */
|
|
|
|
/* Estimate the drift of the time-source neighbor and compensate for it? */
|
|
#ifdef TSCH_CONF_ADAPTIVE_TIMESYNC
|
|
#define TSCH_ADAPTIVE_TIMESYNC TSCH_CONF_ADAPTIVE_TIMESYNC
|
|
#else
|
|
#define TSCH_ADAPTIVE_TIMESYNC 1
|
|
#endif
|
|
|
|
/* HW frame filtering enabled */
|
|
#ifdef TSCH_CONF_HW_FRAME_FILTERING
|
|
#define TSCH_HW_FRAME_FILTERING TSCH_CONF_HW_FRAME_FILTERING
|
|
#else /* TSCH_CONF_HW_FRAME_FILTERING */
|
|
#define TSCH_HW_FRAME_FILTERING 1
|
|
#endif /* TSCH_CONF_HW_FRAME_FILTERING */
|
|
|
|
/* Keep radio always on within TSCH timeslot (1) or turn it off between packet and ACK? (0) */
|
|
#ifdef TSCH_CONF_RADIO_ON_DURING_TIMESLOT
|
|
#define TSCH_RADIO_ON_DURING_TIMESLOT TSCH_CONF_RADIO_ON_DURING_TIMESLOT
|
|
#else
|
|
#define TSCH_RADIO_ON_DURING_TIMESLOT 0
|
|
#endif
|
|
|
|
/* How long to scan each channel in the scanning phase */
|
|
#ifdef TSCH_CONF_CHANNEL_SCAN_DURATION
|
|
#define TSCH_CHANNEL_SCAN_DURATION TSCH_CONF_CHANNEL_SCAN_DURATION
|
|
#else
|
|
#define TSCH_CHANNEL_SCAN_DURATION CLOCK_SECOND
|
|
#endif
|
|
|
|
#endif /* __TSCH_CONF_H__ */
|