139 lines
4.5 KiB
C
139 lines
4.5 KiB
C
/*
|
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
|
* to the MC1322x project (http://mc1322x.devl.org)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
|
* for details.
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <stdint.h>
|
|
#include "crm.h"
|
|
#include "adc.h"
|
|
#include "gpio-util.h"
|
|
|
|
//#define ADC_CHANS_ENABLED 0x3F // channels 0-5 enabled
|
|
//#define ADC_CHANS_ENABLED 0x7E // channels 1-6 enabled
|
|
//#define ADC_CHANS_ENABLED (1 << 6) // only channel 6 enabled
|
|
#define ADC_CHANS_ENABLED 0x1FF // all channels, including battery reference voltage
|
|
|
|
//#define ADC_PRESCALE_VALUE 24 // divide by 24 for 1MHz.
|
|
|
|
#define ADC_SAMPLE_FREQ 400 // Hz (minimum of ~366.21 Hz)
|
|
#define ADC_PRESCALE_VALUE (REF_OSC / ADC_SAMPLE_FREQ)
|
|
|
|
#define ADC_USE_TIMER 0
|
|
#define ADC_USE_INTERRUPTS 0 // incomplete support
|
|
|
|
uint16_t adc_reading[NUM_ADC_CHAN];
|
|
|
|
void ADC_flush(void) {
|
|
while(ADC->FIFO_STATUSbits.EMPTY == 0) ADC->FIFO_READ;
|
|
}
|
|
|
|
uint16_t ADC_READ(void) {
|
|
while(ADC->FIFO_STATUSbits.EMPTY); // loop while empty
|
|
return ADC->FIFO_READ; // upper 4 bits are channel number
|
|
}
|
|
|
|
|
|
void adc_service(void) {
|
|
uint16_t value;
|
|
uint8_t channel;
|
|
while (ADC->FIFO_STATUSbits.EMPTY == 0) {
|
|
value = ADC->FIFO_READ;
|
|
channel = value >> 12;
|
|
if (channel < NUM_ADC_CHAN) adc_reading[channel] = value & 0xFFF;
|
|
}
|
|
}
|
|
|
|
void adc_init(void) {
|
|
uint8_t n;
|
|
|
|
ADC->CLOCK_DIVIDER = 80; // 300 KHz
|
|
ADC->PRESCALE = ADC_PRESCALE_VALUE - 1; // divide by 24 for 1MHz.
|
|
|
|
ADC->CONTROL = 1;
|
|
|
|
// The ON-TIME must always be 10µs or greater - typical On-Time value = 0x000A (10dec)
|
|
ADC->ON_TIME = 10;
|
|
|
|
/*
|
|
NOTE
|
|
The ADC analog block requires 6 ADC_Clocks per conversion, and the
|
|
ADC_Clock must 300kHz or less. With 6 clocks/conversion and a 33.33µs
|
|
clock period:
|
|
* The ADC convert time must always be 20µs or greater
|
|
* If the ADC_Clock is a frequency lower than 300kHz, the convert time
|
|
must always be 6 ADC_Clock periods or greater
|
|
* For override mode, extend convert time to 40µs minimum or greater
|
|
For the convert time:
|
|
* This delay is a function of the Prescale Clock (typically 1 MHz)
|
|
* The register must be initialized for proper operation
|
|
* For a 20µs convert time with 1MHz, value = 0x0014 (20dec)
|
|
* If convert time is insufficient, inaccurate sample data will result
|
|
*/
|
|
ADC->CONVERT_TIME = 1000000 / (115200 / 8) - 1;
|
|
|
|
ADC->MODE = 0; // Automatic
|
|
|
|
#if ADC_USE_INTERRUPTS
|
|
ADC->FIFO_CONTROL = 7;
|
|
#else
|
|
ADC->FIFO_CONTROL = 0;
|
|
#endif
|
|
|
|
#if ADC_USE_TIMER
|
|
ADC->SR_1_HIGH = 0x0000;
|
|
ADC->SR_1_LOW = (REF_OSC / ADC_PRESCALE_VALUE) / (115200 / 8) + 1;
|
|
#endif
|
|
|
|
ADC->SEQ_1 = 0
|
|
#if ADC_USE_TIMER
|
|
| (1 << 15) // sequence based on Timer 1.
|
|
#else
|
|
| (0 << 15) // sequence based on convert time.
|
|
#endif
|
|
| ADC_CHANS_ENABLED;
|
|
|
|
ADC->CONTROL = 0xF001
|
|
//#if ADC_USE_TIMER
|
|
| (1 << 1) // Timer 1 enable
|
|
//#endif
|
|
;
|
|
ADC->OVERRIDE = (1 << 8);
|
|
|
|
for (n=0; n<=8; n++) {
|
|
if ((ADC_CHANS_ENABLED >> n) & 1) {
|
|
gpio_select_function(30 + n, 1); // Function 1 = ADC
|
|
gpio_set_pad_dir(30 + n, PAD_DIR_INPUT);
|
|
}
|
|
}
|
|
}
|