e34eb54960
main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
925 lines
29 KiB
C
925 lines
29 KiB
C
/*
|
|
* Copyright (c) 2008, Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
* $Id: lpp.c,v 1.31 2010/02/18 21:48:39 adamdunkels Exp $
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* Low power probing (R. Musaloiu-Elefteri, C. Liang,
|
|
* A. Terzis. Koala: Ultra-Low Power Data Retrieval in
|
|
* Wireless Sensor Networks, IPSN 2008)
|
|
*
|
|
* \author
|
|
* Adam Dunkels <adam@sics.se>
|
|
*
|
|
*
|
|
* This is an implementation of the LPP (Low-Power Probing) MAC
|
|
* protocol. LPP is a power-saving MAC protocol that works by sending
|
|
* a probe packet each time the radio is turned on. If another node
|
|
* wants to transmit a packet, it can do so after hearing the
|
|
* probe. To send a packet, the sending node turns on its radio to
|
|
* listen for probe packets.
|
|
*
|
|
*/
|
|
|
|
#include "dev/leds.h"
|
|
#include "lib/list.h"
|
|
#include "lib/memb.h"
|
|
#include "lib/random.h"
|
|
#include "net/rime.h"
|
|
#include "net/netstack.h"
|
|
#include "net/mac/mac.h"
|
|
#include "net/mac/lpp.h"
|
|
#include "net/rime/packetbuf.h"
|
|
#include "net/rime/announcement.h"
|
|
#include "sys/compower.h"
|
|
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#include <stdio.h>
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...)
|
|
#endif
|
|
|
|
#define WITH_ACK_OPTIMIZATION 1
|
|
#define WITH_PROBE_AFTER_RECEPTION 0
|
|
#define WITH_PROBE_AFTER_TRANSMISSION 0
|
|
#define WITH_ENCOUNTER_OPTIMIZATION 1
|
|
#define WITH_ADAPTIVE_OFF_TIME 0
|
|
#define WITH_PENDING_BROADCAST 1
|
|
#define WITH_STREAMING 1
|
|
|
|
#ifdef LPP_CONF_LISTEN_TIME
|
|
#define LISTEN_TIME LPP_CONF_LISTEN_TIME
|
|
#else
|
|
#define LISTEN_TIME (CLOCK_SECOND / 128)
|
|
#endif /** LP_CONF_LISTEN_TIME */
|
|
|
|
#ifdef LPP_CONF_OFF_TIME
|
|
#define OFF_TIME LPP_CONF_OFF_TIME
|
|
#else
|
|
#define OFF_TIME (CLOCK_SECOND / MAC_CHANNEL_CHECK_RATE - LISTEN_TIME)
|
|
#endif /* LPP_CONF_OFF_TIME */
|
|
|
|
#define PACKET_LIFETIME (LISTEN_TIME + OFF_TIME)
|
|
#define UNICAST_TIMEOUT (4 * PACKET_LIFETIME)
|
|
#define PROBE_AFTER_TRANSMISSION_TIME (LISTEN_TIME * 2)
|
|
|
|
#define LOWEST_OFF_TIME (CLOCK_SECOND / 8)
|
|
|
|
#define ENCOUNTER_LIFETIME (16 * OFF_TIME)
|
|
|
|
#ifdef QUEUEBUF_CONF_NUM
|
|
#define MAX_QUEUED_PACKETS QUEUEBUF_CONF_NUM / 2
|
|
#else /* QUEUEBUF_CONF_NUM */
|
|
#define MAX_QUEUED_PACKETS 4
|
|
#endif /* QUEUEBUF_CONF_NUM */
|
|
|
|
|
|
/* If CLOCK_SECOND is less than 4, we may end up with an OFF_TIME that
|
|
is 0 which will make compilation fail due to a modulo operation in
|
|
the code. To ensure that OFF_TIME is greater than zero, we use the
|
|
construct below. */
|
|
#if OFF_TIME == 0
|
|
#undef OFF_TIME
|
|
#define OFF_TIME 1
|
|
#endif
|
|
|
|
struct announcement_data {
|
|
uint16_t id;
|
|
uint16_t value;
|
|
};
|
|
|
|
#define ANNOUNCEMENT_MSG_HEADERLEN 2
|
|
struct announcement_msg {
|
|
uint16_t num;
|
|
struct announcement_data data[];
|
|
};
|
|
|
|
#define LPP_PROBE_HEADERLEN 2
|
|
|
|
#define TYPE_PROBE 1
|
|
#define TYPE_DATA 2
|
|
struct lpp_hdr {
|
|
uint16_t type;
|
|
rimeaddr_t sender;
|
|
rimeaddr_t receiver;
|
|
};
|
|
|
|
static uint8_t lpp_is_on;
|
|
|
|
static struct compower_activity current_packet;
|
|
|
|
static struct pt dutycycle_pt;
|
|
static struct ctimer timer;
|
|
|
|
static uint8_t is_listening = 0;
|
|
static clock_time_t off_time_adjustment = 0;
|
|
static clock_time_t off_time = OFF_TIME;
|
|
|
|
struct queue_list_item {
|
|
struct queue_list_item *next;
|
|
struct queuebuf *packet;
|
|
struct ctimer removal_timer;
|
|
struct compower_activity compower;
|
|
mac_callback_t sent_callback;
|
|
void *sent_callback_ptr;
|
|
uint8_t num_transmissions;
|
|
#if WITH_PENDING_BROADCAST
|
|
uint8_t broadcast_flag;
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
};
|
|
|
|
#define BROADCAST_FLAG_NONE 0
|
|
#define BROADCAST_FLAG_WAITING 1
|
|
#define BROADCAST_FLAG_PENDING 2
|
|
#define BROADCAST_FLAG_SEND 3
|
|
|
|
LIST(pending_packets_list);
|
|
LIST(queued_packets_list);
|
|
MEMB(queued_packets_memb, struct queue_list_item, MAX_QUEUED_PACKETS);
|
|
|
|
struct encounter {
|
|
struct encounter *next;
|
|
rimeaddr_t neighbor;
|
|
clock_time_t time;
|
|
struct ctimer remove_timer;
|
|
struct ctimer turn_on_radio_timer;
|
|
};
|
|
|
|
#define MAX_ENCOUNTERS 4
|
|
LIST(encounter_list);
|
|
MEMB(encounter_memb, struct encounter, MAX_ENCOUNTERS);
|
|
|
|
#if WITH_STREAMING
|
|
static uint8_t is_streaming;
|
|
static struct ctimer stream_probe_timer, stream_off_timer;
|
|
#define STREAM_PROBE_TIME CLOCK_SECOND / 128
|
|
#define STREAM_OFF_TIME CLOCK_SECOND / 2
|
|
#endif /* WITH_STREAMING */
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
turn_radio_on(void)
|
|
{
|
|
NETSTACK_RADIO.on();
|
|
/* leds_on(LEDS_YELLOW);*/
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
turn_radio_off(void)
|
|
{
|
|
if(lpp_is_on && is_streaming == 0) {
|
|
NETSTACK_RADIO.off();
|
|
}
|
|
/* leds_off(LEDS_YELLOW);*/
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
remove_encounter(void *encounter)
|
|
{
|
|
struct encounter *e = encounter;
|
|
|
|
ctimer_stop(&e->remove_timer);
|
|
ctimer_stop(&e->turn_on_radio_timer);
|
|
list_remove(encounter_list, e);
|
|
memb_free(&encounter_memb, e);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
register_encounter(rimeaddr_t *neighbor, clock_time_t time)
|
|
{
|
|
struct encounter *e;
|
|
|
|
/* If we have an entry for this neighbor already, we renew it. */
|
|
for(e = list_head(encounter_list); e != NULL; e = e->next) {
|
|
if(rimeaddr_cmp(neighbor, &e->neighbor)) {
|
|
e->time = time;
|
|
ctimer_set(&e->remove_timer, ENCOUNTER_LIFETIME, remove_encounter, e);
|
|
break;
|
|
}
|
|
}
|
|
/* No matchin encounter was found, so we allocate a new one. */
|
|
if(e == NULL) {
|
|
e = memb_alloc(&encounter_memb);
|
|
if(e == NULL) {
|
|
/* We could not allocate memory for this encounter, so we just drop it. */
|
|
return;
|
|
}
|
|
rimeaddr_copy(&e->neighbor, neighbor);
|
|
e->time = time;
|
|
ctimer_set(&e->remove_timer, ENCOUNTER_LIFETIME, remove_encounter, e);
|
|
list_add(encounter_list, e);
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
turn_radio_on_callback(void *packet)
|
|
{
|
|
struct queue_list_item *p = packet;
|
|
|
|
list_remove(pending_packets_list, p);
|
|
list_add(queued_packets_list, p);
|
|
turn_radio_on();
|
|
|
|
/* printf("enc\n");*/
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
stream_off(void *dummy)
|
|
{
|
|
is_streaming = 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/* This function goes through all encounters to see if it finds a
|
|
matching neighbor. If so, we set a ctimer that will turn on the
|
|
radio just before we expect the neighbor to send a probe packet. If
|
|
we cannot find a matching encounter, we just turn on the radio.
|
|
|
|
The outbound packet is put on either the pending_packets_list or
|
|
the queued_packets_list, depending on if the packet should be sent
|
|
immediately.
|
|
*/
|
|
static void
|
|
turn_radio_on_for_neighbor(rimeaddr_t *neighbor, struct queue_list_item *i)
|
|
{
|
|
struct encounter *e;
|
|
|
|
#if WITH_STREAMING
|
|
if(packetbuf_attr(PACKETBUF_ATTR_PACKET_TYPE) ==
|
|
PACKETBUF_ATTR_PACKET_TYPE_STREAM) {
|
|
is_streaming = 1;
|
|
turn_radio_on();
|
|
list_add(queued_packets_list, i);
|
|
ctimer_set(&stream_off_timer, STREAM_OFF_TIME,
|
|
stream_off, NULL);
|
|
return;
|
|
}
|
|
#endif /* WITH_STREAMING */
|
|
|
|
if(rimeaddr_cmp(neighbor, &rimeaddr_null)) {
|
|
#if ! WITH_PENDING_BROADCAST
|
|
/* We have been asked to turn on the radio for a broadcast, so we
|
|
just turn on the radio. */
|
|
turn_radio_on();
|
|
#endif /* ! WITH_PENDING_BROADCAST */
|
|
list_add(queued_packets_list, i);
|
|
return;
|
|
}
|
|
|
|
#if WITH_ENCOUNTER_OPTIMIZATION
|
|
/* We go through the list of encounters to find if we have recorded
|
|
an encounter with this particular neighbor. If so, we can compute
|
|
the time for the next expected encounter and setup a ctimer to
|
|
switch on the radio just before the encounter. */
|
|
for(e = list_head(encounter_list); e != NULL; e = e->next) {
|
|
if(rimeaddr_cmp(neighbor, &e->neighbor)) {
|
|
clock_time_t wait, now;
|
|
|
|
/* We expect encounters to happen roughly every OFF_TIME time
|
|
units. The next expected encounter is at time e->time +
|
|
OFF_TIME. To compute a relative offset, we subtract with
|
|
clock_time(). Because we are only interested in turning on
|
|
the radio within the OFF_TIME period, we compute the waiting
|
|
time with modulo OFF_TIME. */
|
|
|
|
now = clock_time();
|
|
wait = ((clock_time_t)(e->time - now)) % (OFF_TIME + LISTEN_TIME) - LISTEN_TIME;
|
|
|
|
/* printf("now %d e %d e-n %d w %d %d\n", now, e->time, e->time - now, (e->time - now) % (OFF_TIME), wait);
|
|
|
|
printf("Time now %lu last encounter %lu next expected encouter %lu wait %lu/%d (%lu)\n",
|
|
(1000ul * (unsigned long)now) / CLOCK_SECOND,
|
|
(1000ul * (unsigned long)e->time) / CLOCK_SECOND,
|
|
(1000ul * (unsigned long)(e->time + OFF_TIME)) / CLOCK_SECOND,
|
|
(1000ul * (unsigned long)wait) / CLOCK_SECOND, wait,
|
|
(1000ul * (unsigned long)(wait + now)) / CLOCK_SECOND);*/
|
|
|
|
/* printf("Neighbor %d.%d found encounter, waiting %d ticks\n",
|
|
neighbor->u8[0], neighbor->u8[1], wait);*/
|
|
|
|
ctimer_set(&e->turn_on_radio_timer, wait, turn_radio_on_callback, i);
|
|
list_add(pending_packets_list, i);
|
|
return;
|
|
}
|
|
}
|
|
#endif /* WITH_ENCOUNTER_OPTIMIZATION */
|
|
|
|
/* We did not find the neighbor in the list of recent encounters, so
|
|
we just turn on the radio. */
|
|
/* printf("Neighbor %d.%d not found in recent encounters\n",
|
|
neighbor->u8[0], neighbor->u8[1]);*/
|
|
turn_radio_on();
|
|
list_add(queued_packets_list, i);
|
|
return;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
remove_queued_packet(void *item)
|
|
{
|
|
struct queue_list_item *i = item;
|
|
mac_callback_t sent;
|
|
void *ptr;
|
|
int num_transmissions = 0;
|
|
int status;
|
|
|
|
PRINTF("%d.%d: removing queued packet\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1]);
|
|
|
|
|
|
ctimer_stop(&i->removal_timer);
|
|
queuebuf_free(i->packet);
|
|
list_remove(pending_packets_list, i);
|
|
list_remove(queued_packets_list, i);
|
|
|
|
/* XXX potential optimization */
|
|
if(list_length(queued_packets_list) == 0 && is_listening == 0) {
|
|
turn_radio_off();
|
|
compower_accumulate(&i->compower);
|
|
}
|
|
|
|
sent = i->sent_callback;
|
|
ptr = i->sent_callback_ptr;
|
|
num_transmissions = i->num_transmissions;
|
|
memb_free(&queued_packets_memb, i);
|
|
if(num_transmissions == 0) {
|
|
status = MAC_TX_ERR;
|
|
} else {
|
|
status = MAC_TX_OK;
|
|
}
|
|
mac_call_sent_callback(sent, ptr, status, num_transmissions);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#if WITH_PENDING_BROADCAST
|
|
static void
|
|
set_broadcast_flag(struct queue_list_item *i, uint8_t flag)
|
|
{
|
|
i->broadcast_flag = flag;
|
|
ctimer_set(&i->removal_timer, PACKET_LIFETIME, remove_queued_packet, i);
|
|
}
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
listen_callback(int periods)
|
|
{
|
|
is_listening = periods;
|
|
turn_radio_on();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* Send a probe packet.
|
|
*/
|
|
static void
|
|
send_probe(void)
|
|
{
|
|
struct lpp_hdr *hdr;
|
|
struct announcement_msg *adata;
|
|
struct announcement *a;
|
|
|
|
/* Set up the probe header. */
|
|
packetbuf_clear();
|
|
packetbuf_set_datalen(sizeof(struct lpp_hdr));
|
|
hdr = packetbuf_dataptr();
|
|
hdr->type = TYPE_PROBE;
|
|
rimeaddr_copy(&hdr->sender, &rimeaddr_node_addr);
|
|
rimeaddr_copy(&hdr->receiver, packetbuf_addr(PACKETBUF_ADDR_RECEIVER));
|
|
|
|
|
|
/* Construct the announcements */
|
|
adata = (struct announcement_msg *)((char *)hdr + sizeof(struct lpp_hdr));
|
|
|
|
adata->num = 0;
|
|
for(a = announcement_list(); a != NULL; a = a->next) {
|
|
adata->data[adata->num].id = a->id;
|
|
adata->data[adata->num].value = a->value;
|
|
adata->num++;
|
|
}
|
|
|
|
packetbuf_set_datalen(sizeof(struct lpp_hdr) +
|
|
ANNOUNCEMENT_MSG_HEADERLEN +
|
|
sizeof(struct announcement_data) * adata->num);
|
|
|
|
/* PRINTF("Sending probe\n");*/
|
|
|
|
/* printf("probe\n");*/
|
|
|
|
/* XXX should first check access to the medium (CCA - Clear Channel
|
|
Assessment) and add LISTEN_TIME to off_time_adjustment if there
|
|
is a packet in the air. */
|
|
NETSTACK_RADIO.send(packetbuf_hdrptr(), packetbuf_totlen());
|
|
|
|
compower_accumulate(&compower_idle_activity);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
send_stream_probe(void *dummy)
|
|
{
|
|
/* Turn on the radio for sending a probe packet and
|
|
anticipating a data packet from a neighbor. */
|
|
turn_radio_on();
|
|
|
|
/* Send a probe packet. */
|
|
send_probe();
|
|
|
|
is_streaming = 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
num_packets_to_send(void)
|
|
{
|
|
#if WITH_PENDING_BROADCAST
|
|
struct queue_list_item *i;
|
|
int num = 0;
|
|
|
|
for(i = list_head(queued_packets_list); i != NULL; i = i->next) {
|
|
if(i->broadcast_flag == BROADCAST_FLAG_SEND ||
|
|
i->broadcast_flag == BROADCAST_FLAG_NONE) {
|
|
++num;
|
|
}
|
|
}
|
|
return num;
|
|
#else /* WITH_PENDING_BROADCAST */
|
|
return list_length(queued_packets_list);
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* Duty cycle the radio and send probes. This function is called
|
|
* repeatedly by a ctimer. The function restart_dutycycle() is used to
|
|
* (re)start the duty cycling.
|
|
*/
|
|
static int
|
|
dutycycle(void *ptr)
|
|
{
|
|
struct ctimer *t = ptr;
|
|
struct queue_list_item *p;
|
|
|
|
PT_BEGIN(&dutycycle_pt);
|
|
|
|
while(1) {
|
|
|
|
#if WITH_PENDING_BROADCAST
|
|
{
|
|
/* Before sending the probe, we mark all broadcast packets in
|
|
our output queue to be pending. This means that they are
|
|
ready to be sent, once we know that no neighbor is
|
|
currently broadcasting. */
|
|
for(p = list_head(queued_packets_list); p != NULL; p = p->next) {
|
|
if(p->broadcast_flag == BROADCAST_FLAG_WAITING) {
|
|
PRINTF("wait -> pending\n");
|
|
set_broadcast_flag(p, BROADCAST_FLAG_PENDING);
|
|
}
|
|
}
|
|
}
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
|
|
/* Turn on the radio for sending a probe packet and
|
|
anticipating a data packet from a neighbor. */
|
|
turn_radio_on();
|
|
|
|
/* Send a probe packet. */
|
|
send_probe();
|
|
|
|
/* Set a timer so that we keep the radio on for LISTEN_TIME. */
|
|
ctimer_set(t, LISTEN_TIME, (void (*)(void *))dutycycle, t);
|
|
PT_YIELD(&dutycycle_pt);
|
|
|
|
#if WITH_PENDING_BROADCAST
|
|
{
|
|
struct queue_list_item *p;
|
|
/* Go through the list of packets we are waiting to send, and
|
|
check if there are any pending broadcasts in the list. If
|
|
there are pending broadcasts, and we did not receive any
|
|
broadcast packets from a neighbor in response to our probe,
|
|
we mark the broadcasts as being ready to send. */
|
|
for(p = list_head(queued_packets_list); p != NULL; p = p->next) {
|
|
if(p->broadcast_flag == BROADCAST_FLAG_PENDING) {
|
|
PRINTF("pending -> send\n");
|
|
set_broadcast_flag(p, BROADCAST_FLAG_SEND);
|
|
turn_radio_on();
|
|
}
|
|
}
|
|
}
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
|
|
/* If we have no packets to send (indicated by the list length of
|
|
queued_packets_list being zero), we should turn the radio
|
|
off. Othersize, we keep the radio on. */
|
|
if(num_packets_to_send() == 0) {
|
|
|
|
/* If we are not listening for announcements, we turn the radio
|
|
off and wait until we send the next probe. */
|
|
if(is_listening == 0) {
|
|
turn_radio_off();
|
|
compower_accumulate(&compower_idle_activity);
|
|
ctimer_set(t, off_time + off_time_adjustment, (void (*)(void *))dutycycle, t);
|
|
off_time_adjustment = 0;
|
|
PT_YIELD(&dutycycle_pt);
|
|
|
|
#if WITH_ADAPTIVE_OFF_TIME
|
|
off_time += LOWEST_OFF_TIME;
|
|
if(off_time > OFF_TIME) {
|
|
off_time = OFF_TIME;
|
|
}
|
|
#endif /* WITH_ADAPTIVE_OFF_TIME */
|
|
|
|
} else {
|
|
/* We are listening for annonucements, so we count down the
|
|
listen time, and keep the radio on. */
|
|
is_listening--;
|
|
ctimer_set(t, OFF_TIME, (void (*)(void *))dutycycle, t);
|
|
PT_YIELD(&dutycycle_pt);
|
|
}
|
|
} else {
|
|
/* We had pending packets to send, so we do not turn the radio off. */
|
|
|
|
ctimer_set(t, off_time, (void (*)(void *))dutycycle, t);
|
|
PT_YIELD(&dutycycle_pt);
|
|
}
|
|
}
|
|
|
|
PT_END(&dutycycle_pt);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
restart_dutycycle(clock_time_t initial_wait)
|
|
{
|
|
PT_INIT(&dutycycle_pt);
|
|
ctimer_set(&timer, initial_wait, (void (*)(void *))dutycycle, &timer);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
*
|
|
* Send a packet. This function builds a complete packet with an LPP
|
|
* header and queues the packet. When a probe is heard (in the
|
|
* read_packet() function), and the sender of the probe matches the
|
|
* receiver of the queued packet, the queued packet is sent.
|
|
*
|
|
* ACK packets are treated differently from other packets: if a node
|
|
* sends a packet that it expects to be ACKed, the sending node keeps
|
|
* its radio on for some time after sending its packet. So we do not
|
|
* need to wait for a probe packet: we just transmit the ACK packet
|
|
* immediately.
|
|
*
|
|
*/
|
|
static void
|
|
send_packet(mac_callback_t sent, void *ptr)
|
|
{
|
|
struct lpp_hdr hdr;
|
|
clock_time_t timeout;
|
|
uint8_t is_broadcast = 0;
|
|
|
|
rimeaddr_copy(&hdr.sender, &rimeaddr_node_addr);
|
|
rimeaddr_copy(&hdr.receiver, packetbuf_addr(PACKETBUF_ADDR_RECEIVER));
|
|
if(rimeaddr_cmp(&hdr.receiver, &rimeaddr_null)) {
|
|
is_broadcast = 1;
|
|
}
|
|
hdr.type = TYPE_DATA;
|
|
|
|
packetbuf_hdralloc(sizeof(struct lpp_hdr));
|
|
memcpy(packetbuf_hdrptr(), &hdr, sizeof(struct lpp_hdr));
|
|
|
|
packetbuf_compact();
|
|
PRINTF("%d.%d: queueing packet to %d.%d, channel %d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr.receiver.u8[0], hdr.receiver.u8[1],
|
|
packetbuf_attr(PACKETBUF_ATTR_CHANNEL));
|
|
#if WITH_ACK_OPTIMIZATION
|
|
if(packetbuf_attr(PACKETBUF_ATTR_PACKET_TYPE) == PACKETBUF_ATTR_PACKET_TYPE_ACK) {
|
|
/* Send ACKs immediately. */
|
|
NETSTACK_RADIO.send(packetbuf_hdrptr(), packetbuf_totlen());
|
|
mac_call_sent_callback(sent, ptr, MAC_TX_OK, 1);
|
|
return;
|
|
}
|
|
#endif /* WITH_ACK_OPTIMIZATION */
|
|
|
|
#if WITH_ADAPTIVE_OFF_TIME
|
|
off_time = LOWEST_OFF_TIME;
|
|
restart_dutycycle(off_time);
|
|
#endif /* WITH_ADAPTIVE_OFF_TIME */
|
|
|
|
{
|
|
struct queue_list_item *i;
|
|
i = memb_alloc(&queued_packets_memb);
|
|
if(i != NULL) {
|
|
i->sent_callback = sent;
|
|
i->sent_callback_ptr = ptr;
|
|
i->num_transmissions = 0;
|
|
i->packet = queuebuf_new_from_packetbuf();
|
|
if(i->packet == NULL) {
|
|
memb_free(&queued_packets_memb, i);
|
|
printf("null packet\n");
|
|
mac_call_sent_callback(sent, ptr, MAC_TX_ERR, 0);
|
|
return;
|
|
} else {
|
|
if(is_broadcast) {
|
|
timeout = PACKET_LIFETIME;
|
|
#if WITH_PENDING_BROADCAST
|
|
/* We set the broadcast state of the packet to be
|
|
waiting. This means that the packet is waiting for our
|
|
next probe to be sent. Our next probe is used to check if
|
|
there are any neighbors currently broadcasting a
|
|
packet. If so, we will get a broadcast packet in response
|
|
to our probe. If no broadcast packet is received in
|
|
response to our probe, we mark the packet as ready to be
|
|
sent. */
|
|
set_broadcast_flag(i, BROADCAST_FLAG_WAITING);
|
|
PRINTF("-> waiting\n");
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
} else {
|
|
timeout = UNICAST_TIMEOUT;
|
|
#if WITH_PENDING_BROADCAST
|
|
i->broadcast_flag = BROADCAST_FLAG_NONE;
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
}
|
|
ctimer_set(&i->removal_timer, timeout, remove_queued_packet, i);
|
|
|
|
/* Wait for a probe packet from a neighbor. The actual packet
|
|
transmission is handled by the read_packet() function,
|
|
which receives the probe from the neighbor. */
|
|
turn_radio_on_for_neighbor(&hdr.receiver, i);
|
|
|
|
}
|
|
} else {
|
|
printf("i == NULL\n");
|
|
mac_call_sent_callback(sent, ptr, MAC_TX_ERR, 0);
|
|
}
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* Read a packet from the underlying radio driver. If the incoming
|
|
* packet is a probe packet and the sender of the probe matches the
|
|
* destination address of the queued packet (if any), the queued packet
|
|
* is sent.
|
|
*/
|
|
static void
|
|
input_packet(void)
|
|
{
|
|
struct lpp_hdr *hdr;
|
|
clock_time_t reception_time;
|
|
|
|
reception_time = clock_time();
|
|
|
|
hdr = packetbuf_dataptr();
|
|
packetbuf_hdrreduce(sizeof(struct lpp_hdr));
|
|
/* PRINTF("got packet type %d\n", hdr->type);*/
|
|
|
|
if(hdr->type == TYPE_PROBE) {
|
|
/* Parse incoming announcements */
|
|
struct announcement_msg *adata = packetbuf_dataptr();
|
|
int i;
|
|
|
|
/* PRINTF("%d.%d: probe from %d.%d with %d announcements\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1], adata->num);*/
|
|
|
|
for(i = 0; i < adata->num; ++i) {
|
|
/* PRINTF("%d.%d: announcement %d: %d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
adata->data[i].id,
|
|
adata->data[i].value);*/
|
|
|
|
announcement_heard(&hdr->sender,
|
|
adata->data[i].id,
|
|
adata->data[i].value);
|
|
}
|
|
|
|
/* Register the encounter with the sending node. We now know the
|
|
neighbor's phase. */
|
|
register_encounter(&hdr->sender, reception_time);
|
|
|
|
/* Go through the list of packets to be sent to see if any of
|
|
them match the sender of the probe, or if they are a
|
|
broadcast packet that should be sent. */
|
|
if(list_length(queued_packets_list) > 0) {
|
|
struct queue_list_item *i;
|
|
for(i = list_head(queued_packets_list); i != NULL; i = i->next) {
|
|
struct lpp_hdr *qhdr;
|
|
|
|
qhdr = queuebuf_dataptr(i->packet);
|
|
if(rimeaddr_cmp(&qhdr->receiver, &hdr->sender) ||
|
|
rimeaddr_cmp(&qhdr->receiver, &rimeaddr_null)) {
|
|
queuebuf_to_packetbuf(i->packet);
|
|
|
|
#if WITH_PENDING_BROADCAST
|
|
if(i->broadcast_flag == BROADCAST_FLAG_NONE ||
|
|
i->broadcast_flag == BROADCAST_FLAG_SEND) {
|
|
i->num_transmissions = 1;
|
|
NETSTACK_RADIO.send(queuebuf_dataptr(i->packet),
|
|
queuebuf_datalen(i->packet));
|
|
PRINTF("%d.%d: got a probe from %d.%d, sent packet to %d.%d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1],
|
|
qhdr->receiver.u8[0], qhdr->receiver.u8[1]);
|
|
|
|
} else {
|
|
PRINTF("%d.%d: got a probe from %d.%d, did not send packet\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1]);
|
|
}
|
|
#else /* WITH_PENDING_BROADCAST */
|
|
i->num_transmissions = 1;
|
|
NETSTACK_RADIO.send(queuebuf_dataptr(i->packet),
|
|
queuebuf_datalen(i->packet));
|
|
PRINTF("%d.%d: got a probe from %d.%d, sent packet to %d.%d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1],
|
|
qhdr->receiver.u8[0], qhdr->receiver.u8[1]);
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
|
|
|
|
|
|
/* Attribute the energy spent on listening for the probe
|
|
to this packet transmission. */
|
|
compower_accumulate(&i->compower);
|
|
|
|
/* If the packet was not a broadcast packet, we dequeue it
|
|
now. Broadcast packets should be transmitted to all
|
|
neighbors, and are dequeued by the dutycycling function
|
|
instead, after the appropriate time. */
|
|
if(!rimeaddr_cmp(&qhdr->receiver, &rimeaddr_null)) {
|
|
remove_queued_packet(i);
|
|
|
|
#if WITH_PROBE_AFTER_TRANSMISSION
|
|
/* Send a probe packet to catch any reply from the other node. */
|
|
restart_dutycycle(PROBE_AFTER_TRANSMISSION_TIME);
|
|
#endif /* WITH_PROBE_AFTER_TRANSMISSION */
|
|
|
|
#if WITH_STREAMING
|
|
if(is_streaming) {
|
|
ctimer_set(&stream_probe_timer, STREAM_PROBE_TIME,
|
|
send_stream_probe, NULL);
|
|
}
|
|
#endif /* WITH_STREAMING */
|
|
}
|
|
|
|
#if WITH_ACK_OPTIMIZATION
|
|
if(packetbuf_attr(PACKETBUF_ATTR_RELIABLE) ||
|
|
packetbuf_attr(PACKETBUF_ATTR_ERELIABLE)) {
|
|
/* We're sending a packet that needs an ACK, so we keep
|
|
the radio on in anticipation of the ACK. */
|
|
turn_radio_on();
|
|
}
|
|
#endif /* WITH_ACK_OPTIMIZATION */
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
} else if(hdr->type == TYPE_DATA) {
|
|
if(!rimeaddr_cmp(&hdr->receiver, &rimeaddr_null)) {
|
|
if(!rimeaddr_cmp(&hdr->receiver, &rimeaddr_node_addr)) {
|
|
/* Not broadcast or for us */
|
|
PRINTF("%d.%d: data not for us from %d.%d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1]);
|
|
return;
|
|
}
|
|
packetbuf_set_addr(PACKETBUF_ADDR_RECEIVER, &hdr->receiver);
|
|
}
|
|
packetbuf_set_addr(PACKETBUF_ADDR_SENDER, &hdr->sender);
|
|
|
|
PRINTF("%d.%d: got data from %d.%d\n",
|
|
rimeaddr_node_addr.u8[0], rimeaddr_node_addr.u8[1],
|
|
hdr->sender.u8[0], hdr->sender.u8[1]);
|
|
|
|
/* Accumulate the power consumption for the packet reception. */
|
|
compower_accumulate(¤t_packet);
|
|
/* Convert the accumulated power consumption for the received
|
|
packet to packet attributes so that the higher levels can
|
|
keep track of the amount of energy spent on receiving the
|
|
packet. */
|
|
compower_attrconv(¤t_packet);
|
|
|
|
/* Clear the accumulated power consumption so that it is ready
|
|
for the next packet. */
|
|
compower_clear(¤t_packet);
|
|
|
|
#if WITH_PENDING_BROADCAST
|
|
if(rimeaddr_cmp(&hdr->receiver, &rimeaddr_null)) {
|
|
/* This is a broadcast packet. Check the list of pending
|
|
packets to see if we are currently sending a broadcast. If
|
|
so, we refrain from sending our broadcast until one sleep
|
|
cycle period, so that the other broadcaster will have
|
|
finished sending. */
|
|
|
|
struct queue_list_item *i;
|
|
for(i = list_head(queued_packets_list); i != NULL; i = i->next) {
|
|
/* If the packet is a broadcast packet that is not yet
|
|
ready to be sent, we do not send it. */
|
|
if(i->broadcast_flag == BROADCAST_FLAG_PENDING) {
|
|
PRINTF("Someone else is sending, pending -> waiting\n");
|
|
set_broadcast_flag(i, BROADCAST_FLAG_WAITING);
|
|
}
|
|
}
|
|
}
|
|
#endif /* WITH_PENDING_BROADCAST */
|
|
|
|
|
|
#if WITH_PROBE_AFTER_RECEPTION
|
|
/* XXX send probe after receiving a packet to facilitate data
|
|
streaming. We must first copy the contents of the packetbuf into
|
|
a queuebuf to avoid overwriting the data with the probe packet. */
|
|
if(rimeaddr_cmp(&hdr->receiver, &rimeaddr_node_addr)) {
|
|
struct queuebuf *q;
|
|
q = queuebuf_new_from_packetbuf();
|
|
if(q != NULL) {
|
|
send_probe();
|
|
queuebuf_to_packetbuf(q);
|
|
queuebuf_free(q);
|
|
}
|
|
}
|
|
#endif /* WITH_PROBE_AFTER_RECEPTION */
|
|
|
|
#if WITH_ADAPTIVE_OFF_TIME
|
|
off_time = LOWEST_OFF_TIME;
|
|
restart_dutycycle(off_time);
|
|
#endif /* WITH_ADAPTIVE_OFF_TIME */
|
|
|
|
NETSTACK_MAC.input();
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
on(void)
|
|
{
|
|
lpp_is_on = 1;
|
|
turn_radio_on();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
off(int keep_radio_on)
|
|
{
|
|
lpp_is_on = 0;
|
|
if(keep_radio_on) {
|
|
turn_radio_on();
|
|
} else {
|
|
turn_radio_off();
|
|
}
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static unsigned short
|
|
channel_check_interval(void)
|
|
{
|
|
return OFF_TIME + LISTEN_TIME;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
init(void)
|
|
{
|
|
restart_dutycycle(random_rand() % OFF_TIME);
|
|
|
|
lpp_is_on = 1;
|
|
|
|
announcement_register_listen_callback(listen_callback);
|
|
|
|
memb_init(&queued_packets_memb);
|
|
list_init(queued_packets_list);
|
|
list_init(pending_packets_list);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
const struct mac_driver lpp_driver = {
|
|
"LPP",
|
|
init,
|
|
send_packet,
|
|
input_packet,
|
|
on,
|
|
off,
|
|
channel_check_interval,
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|