osd-contiki/cpu/mc1322x/lib/include/uart.h
Mariano Alvira 2c9a538582 Merge branch 'master' of git://git.devl.org/git/malvira/libmc1322x into bump-libmc1322x
bump libmc1322x to 7bee48243c

Conflicts:
	cpu/mc1322x/board/Makefile.board
	cpu/mc1322x/lib/include/uart.h
	cpu/mc1322x/lib/uart1.c
	cpu/mc1322x/lib/uart2.c
	cpu/mc1322x/src/default_lowlevel.c
2012-11-18 18:27:39 -05:00

201 lines
6.1 KiB
C

/*
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
* to the MC1322x project (http://mc1322x.devl.org)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of libmc1322x: see http://mc1322x.devl.org
* for details.
*
*
*/
#ifndef UART_H
#define UART_H
#include <stdint.h>
/* Timer registers are all 16-bit wide with 16-bit access only */
#define UART1_BASE (0x80005000)
#define UART2_BASE (0x8000B000)
struct UART_struct {
union {
uint32_t CON;
struct UART_CON {
uint32_t TXE:1;
uint32_t RXE:1;
uint32_t PEN:1;
uint32_t EP:1;
uint32_t ST2:1;
uint32_t SB:1;
uint32_t CONTX:1;
uint32_t TXOENB:1;
uint32_t :2;
uint32_t XTIM:1;
uint32_t FCP:1;
uint32_t FCE:1;
uint32_t MTXR:1;
uint32_t MRXR:1;
uint32_t TST:1;
uint32_t :16;
} CONbits;
};
union {
uint32_t STAT;
struct UART_STAT {
uint32_t SE:1;
uint32_t PE:1;
uint32_t FE:1;
uint32_t TOE:1;
uint32_t ROE:1;
uint32_t RUE:1;
uint32_t RXRDY:1;
uint32_t TXRDY:1;
uint32_t :24;
} USTATbits;
};
union {
uint32_t DATA;
struct UART_DATA {
uint32_t DATA:8;
uint32_t :24;
} DATAbits;
};
union {
uint32_t RXCON;
struct UART_URXCON {
uint32_t LVL:6;
uint32_t :26;
} RXCONbits;
};
union {
uint32_t TXCON;
struct UART_TXCON {
uint32_t LVL:6;
uint32_t :26;
} TXCONbits;
};
union {
uint32_t CTS;
struct UART_CTS {
uint32_t LVL:5;
uint32_t :27;
} CTSbits;
};
union {
uint32_t BR;
struct UART_BR {
uint32_t MOD:16;
uint32_t INC:16;
} BRbits;
};
};
static volatile struct UART_struct * const UART1 = (void *) (UART1_BASE);
static volatile struct UART_struct * const UART2 = (void *) (UART2_BASE);
/* Old uart definitions, for compatibility */
#ifndef REG_NO_COMPAT
#define UCON (0)
/* UCON bits */
#define UCON_SAMP 10
#define UCON_SAMP_8X 0
#define UCON_SAMP_16X 1
#define USTAT (0x04)
#define UDATA (0x08)
#define URXCON (0x0c)
#define UTXCON (0x10)
#define UCTS (0x14)
#define UBRCNT (0x18)
#define UART1_UCON ((volatile uint32_t *) ( UART1_BASE + UCON ))
#define UART1_USTAT ((volatile uint32_t *) ( UART1_BASE + USTAT ))
#define UART1_UDATA ((volatile uint32_t *) ( UART1_BASE + UDATA ))
#define UART1_URXCON ((volatile uint32_t *) ( UART1_BASE + URXCON ))
#define UART1_UTXCON ((volatile uint32_t *) ( UART1_BASE + UTXCON ))
#define UART1_UCTS ((volatile uint32_t *) ( UART1_BASE + UCTS ))
#define UART1_UBRCNT ((volatile uint32_t *) ( UART1_BASE + UBRCNT ))
#define UART2_UCON ((volatile uint32_t *) ( UART2_BASE + UCON ))
#define UART2_USTAT ((volatile uint32_t *) ( UART2_BASE + USTAT ))
#define UART2_UDATA ((volatile uint32_t *) ( UART2_BASE + UDATA ))
#define UART2_URXCON ((volatile uint32_t *) ( UART2_BASE + URXCON ))
#define UART2_UTXCON ((volatile uint32_t *) ( UART2_BASE + UTXCON ))
#define UART2_UCTS ((volatile uint32_t *) ( UART2_BASE + UCTS ))
#define UART2_UBRCNT ((volatile uint32_t *) ( UART2_BASE + UBRCNT ))
#endif /* REG_NO_COMPAT */
void uart_init(volatile struct UART_struct * uart, uint32_t baud);
void uart_setbaud(volatile struct UART_struct * uart, uint32_t baud);
void uart_flowctl(volatile struct UART_struct * uart, uint8_t on);
/* The mc1322x has a 32 byte hardware FIFO for transmitted characters.
* Currently it is always filled from a larger RAM buffer. It would be
* possible to eliminate that overhead by filling directly from a chain
* of data buffer pointers, but printf's would be not so easy.
*/
#define UART1_TX_BUFFERSIZE 1024
extern volatile uint32_t u1_tx_head, u1_tx_tail;
void uart1_putc(char c);
/* The mc1322x has a 32 byte hardware FIFO for received characters.
* If a larger rx buffersize is specified the FIFO will be extended into RAM.
* RAM transfers will occur on interrupt when the FIFO is nearly full.
* If a smaller buffersize is specified hardware flow control will be
* initiated at that FIFO level.
* Set to 32 for no flow control or RAM buffer.
*/
#define UART1_RX_BUFFERSIZE 128
#if UART1_RX_BUFFERSIZE > 32
extern volatile uint32_t u1_rx_head, u1_rx_tail;
#define uart1_can_get() ((u1_rx_head!=u1_rx_tail) || (*UART1_URXCON > 0))
#else
#define uart1_can_get() (*UART1_URXCON > 0)
#endif
uint8_t uart1_getc(void);
#define UART2_TX_BUFFERSIZE 1024
extern volatile uint32_t u2_tx_head, u2_tx_tail;
void uart2_putc(char c);
#define UART2_RX_BUFFERSIZE 128
#if UART2_RX_BUFFERSIZE > 32
extern volatile uint32_t u2_rx_head, u2_rx_tail;
#define uart2_can_get() ((u2_rx_head!=u2_rx_tail) || (*UART2_URXCON > 0))
#else
#define uart2_can_get() (*UART2_URXCON > 0)
#endif
uint8_t uart2_getc(void);
#endif