242 lines
7.6 KiB
C
242 lines
7.6 KiB
C
/** @file mems.c
|
|
* @brief MB851 MEMS drivers
|
|
*
|
|
*
|
|
* <!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
|
|
*/
|
|
#include PLATFORM_HEADER
|
|
#include "hal/hal.h"
|
|
#include "hal/error.h"
|
|
#include "hal/micro/mems.h"
|
|
|
|
#define TIMEOUT 20000
|
|
|
|
#define SUCCESS 1
|
|
|
|
#define SEND_BYTE(data) do{ SC2_DATA=(data); SC2_TWICTRL1 |= SC_TWISEND; }while(0)
|
|
|
|
#define WAIT_CMD_FIN() do{}while((SC2_TWISTAT&SC_TWICMDFIN)!=SC_TWICMDFIN)
|
|
#define WAIT_TX_FIN() do{}while((SC2_TWISTAT&SC_TWITXFIN)!=SC_TWITXFIN)
|
|
#define WAIT_RX_FIN() do{}while((SC2_TWISTAT&SC_TWIRXFIN)!=SC_TWIRXFIN)
|
|
|
|
static int8u i2c_MEMS_Init (void);
|
|
static int8u i2c_MEMS_Read (t_mems_data *mems_data);
|
|
//extern void halInternalResetWatchDog(void);
|
|
static int8u i2c_Send_Frame (int8u DeviceAddress, int8u *pBuffer, int8u NoOfBytes);
|
|
static int8u i2c_Send_Frame (int8u DeviceAddress, int8u *pBuffer, int8u NoOfBytes);
|
|
int8u i2c_write_reg (int8u slave_addr, int8u reg_addr, int8u reg_value);
|
|
static int8u i2c_MEMS_Init (void);
|
|
static int8u i2c_MEMS_Read (t_mems_data *mems_data);
|
|
|
|
/* Functions -----------------------------------------------------------------*/
|
|
int8u mems_Init(void)
|
|
{
|
|
int8u ret = 0;
|
|
|
|
// GPIO assignments
|
|
// PA1: SC2SDA (Serial Data)
|
|
// PA2: SC2SCL (Serial Clock)
|
|
|
|
//-----SC2 I2C Master GPIO configuration
|
|
|
|
TIM2_CCER &= 0xFFFFEEEE;
|
|
SC2_MODE = SC2_MODE_I2C;
|
|
GPIO_PACFGL &= 0xFFFFF00F;
|
|
GPIO_PACFGL |= 0x00000DD0;
|
|
|
|
SC2_RATELIN = 14; // generates standard 100kbps or 400kbps
|
|
SC2_RATEEXP = 1; // 3 yields 100kbps; 1 yields 400kbps
|
|
SC2_TWICTRL1 = 0; // start from a clean state
|
|
SC2_TWICTRL2 = 0; // start from a clean state
|
|
|
|
ret = i2c_MEMS_Init();
|
|
|
|
//Add later if really needed
|
|
#ifdef ST_DBG
|
|
if (!ret)
|
|
i2c_DeInit(MEMS_I2C);
|
|
#endif
|
|
|
|
return ret;
|
|
}/* end mems_Init */
|
|
|
|
int8u mems_GetValue(t_mems_data *mems_data)
|
|
{
|
|
int8u i;
|
|
i = i2c_MEMS_Read(mems_data);
|
|
return i;
|
|
}/* end mems_GetValue() */
|
|
|
|
|
|
/* Private Functions ---------------------------------------------------------*/
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_Send_Frame
|
|
* Description : It sends I2C frame
|
|
* Input : DeviceAddress is the destination device address
|
|
* pBUffer is the buffer data
|
|
* NoOfBytes is the number of bytes
|
|
* Output : None
|
|
* Return : status
|
|
*******************************************************************************/
|
|
static int8u i2c_Send_Frame (int8u DeviceAddress, int8u *pBuffer, int8u NoOfBytes)
|
|
{
|
|
int8u i, data;
|
|
|
|
SC2_TWICTRL1 |= SC_TWISTART; // send start
|
|
WAIT_CMD_FIN();
|
|
|
|
SEND_BYTE(DeviceAddress); // send the address low byte
|
|
WAIT_TX_FIN();
|
|
|
|
// loop sending the data
|
|
for (i=0; i<NoOfBytes; i++) {
|
|
halInternalResetWatchDog();
|
|
|
|
data = *(pBuffer+i);
|
|
|
|
SEND_BYTE(data);
|
|
|
|
WAIT_TX_FIN();
|
|
}
|
|
|
|
SC2_TWICTRL1 |= SC_TWISTOP;
|
|
WAIT_CMD_FIN();
|
|
|
|
return SUCCESS;
|
|
}/* end i2c_Send_Frame() */
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_Receive_Frame
|
|
* Description : It receives an I2C frame and stores it in pBUffer parameter
|
|
* Input : slave_addr is the slave address
|
|
* reg_addr is the register address
|
|
* NoOfBytes is the numenr of bytes to read starting from reg_addr
|
|
* Output : buffer
|
|
* Return : status
|
|
*******************************************************************************/
|
|
static int8u i2c_Receive_Frame (int8u slave_addr, int8u reg_addr, int8u *pBuffer, int8u NoOfBytes)
|
|
{
|
|
int8u i, addr = reg_addr;
|
|
|
|
if (NoOfBytes > 1)
|
|
addr += REPETIR;
|
|
|
|
SC2_TWICTRL1 |= SC_TWISTART; // send start
|
|
WAIT_CMD_FIN();
|
|
|
|
SEND_BYTE(slave_addr | 0x00); // send the address low byte
|
|
WAIT_TX_FIN();
|
|
|
|
SEND_BYTE(addr);
|
|
WAIT_TX_FIN();
|
|
|
|
SC2_TWICTRL1 |= SC_TWISTART; // send start
|
|
WAIT_CMD_FIN();
|
|
|
|
SEND_BYTE(slave_addr | 0x01); // send the address low byte
|
|
WAIT_TX_FIN();
|
|
|
|
// loop receiving the data
|
|
for (i=0;i<NoOfBytes;i++){
|
|
halInternalResetWatchDog();
|
|
|
|
if (i < (NoOfBytes - 1))
|
|
SC2_TWICTRL2 |= SC_TWIACK; // ack on receipt of data
|
|
else
|
|
SC2_TWICTRL2 &= ~SC_TWIACK; // don't ack if last one
|
|
|
|
SC2_TWICTRL1 |= SC_TWIRECV; // set to receive
|
|
WAIT_RX_FIN();
|
|
*(pBuffer+i) = SC2_DATA; // receive data
|
|
}
|
|
|
|
SC2_TWICTRL1 |= SC_TWISTOP; // send STOP
|
|
WAIT_CMD_FIN();
|
|
|
|
return SUCCESS;
|
|
}/* end i2c_Receive_Frame() */
|
|
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_write_reg
|
|
* Description : It writes a register on the I2C target
|
|
* Input : slave addr is the I2C target device
|
|
* reg_addr is the address of the register to be written
|
|
* reg_value is the value of the register to be written
|
|
* NoOfBytes is the numenr of bytes to read starting from reg_addr
|
|
* Output : None
|
|
* Return : I2C frame
|
|
*******************************************************************************/
|
|
int8u i2c_write_reg (int8u slave_addr, int8u reg_addr, int8u reg_value)
|
|
{
|
|
int8u i2c_buffer[2];
|
|
|
|
i2c_buffer[0] = reg_addr;
|
|
i2c_buffer[1] = reg_value;
|
|
|
|
return i2c_Send_Frame (slave_addr, i2c_buffer, 2);
|
|
}/* end i2c_write_reg() */
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_read_reg
|
|
* Description : It reads a register on the I2C target
|
|
* Input : slave addr is the I2C target device
|
|
* reg_addr is the address of the register to be read
|
|
* pBuffer is the storage destination for the read data
|
|
* NoOfBytes is the amount of data to read
|
|
* Output : None
|
|
* Return : I2C frame
|
|
*******************************************************************************/
|
|
int8u i2c_read_reg (int8u slave_addr, int8u reg_addr, int8u *pBuffer, int8u NoOfBytes)
|
|
{
|
|
return i2c_Receive_Frame (slave_addr, reg_addr, pBuffer, NoOfBytes);
|
|
}/* end i2c_read_reg() */
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_MEMS_Init
|
|
* Description : It performs basic MEMS register writes for initialization
|
|
* purposes
|
|
* Input : None
|
|
* Output : None
|
|
* Return : status
|
|
*******************************************************************************/
|
|
static int8u i2c_MEMS_Init (void)
|
|
{
|
|
int8u i = 0;
|
|
|
|
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, STATUS_REG, 0x00); //no flag
|
|
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, FF_WU_CFG, 0x00); // all off
|
|
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, DD_CFG, 0x00); // all off
|
|
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, (1<<4) | (1<<1) | (1 << 0));
|
|
i += i2c_write_reg (kLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7);
|
|
|
|
if (i != 5)
|
|
return 0;
|
|
|
|
return 1;
|
|
}/* end i2c_MEMS_Init() */
|
|
|
|
/*******************************************************************************
|
|
* Function Name : i2c_MEMS_Read
|
|
* Description : It reads 3 axes acceleration data from mems
|
|
* Input : None
|
|
* Output : mems_data
|
|
* Return : I2C frame
|
|
*******************************************************************************/
|
|
static int8u i2c_MEMS_Read (t_mems_data *mems_data)
|
|
{
|
|
int8u i, i2c_buffer[8];
|
|
|
|
i = i2c_read_reg (kLIS3L02DQ_SLAVE_ADDR, OUTX_L, i2c_buffer, 8);
|
|
|
|
mems_data->outx_h = i2c_buffer[0];
|
|
mems_data->outx_l = i2c_buffer[1];
|
|
mems_data->outy_h = i2c_buffer[2];
|
|
mems_data->outy_l = i2c_buffer[3];
|
|
mems_data->outz_h = i2c_buffer[4];
|
|
mems_data->outz_l = i2c_buffer[5];
|
|
|
|
return i;
|
|
}/* end i2c_MEMS_Read() */
|