osd-contiki/cpu/msp430/rtimer-arch.c
2008-07-04 00:02:21 +00:00

91 lines
2.9 KiB
C

/*
* Copyright (c) 2007, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* $Id: rtimer-arch.c,v 1.7 2008/07/04 00:02:21 adamdunkels Exp $
*/
/**
* \file
* MSP430-specific rtimer code
* \author
* Adam Dunkels <adam@sics.se>
*/
#include <io.h>
#include <signal.h>
#include "sys/energest.h"
#include "sys/rtimer.h"
#define DEBUG 0
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
interrupt(TIMERB1_VECTOR) timerb1 (void) {
ENERGEST_ON(ENERGEST_TYPE_IRQ);
if(TBIV == 2) {
rtimer_run_next();
}
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
void
rtimer_arch_init(void)
{
dint();
/* Select SMCLK (2.4576MHz), clear TAR; This makes the rtimer count
the number of processor cycles executed by the CPU. */
//TBCTL = TBSSEL1 | TBCLR;
/* Select ACLK 32768Hz clock, divide by 8 */
TBCTL = TBSSEL0 | TBCLR | ID_3;
/* CCR1 interrupt enabled, interrupt occurs when timer equals CCR1. */
TBCCTL1 = CCIE;
/* Start Timer_B in continuous mode. */
TBCTL |= MC1;
/* Enable interrupts. */
eint();
}
/*---------------------------------------------------------------------------*/
void
rtimer_arch_schedule(rtimer_clock_t t)
{
PRINTF("rtimer_arch_schedule time %u\n", t);
TBCCR1 = t;
}