osd-contiki/platform/srf06-cc26xx/launchpad/cc1310/board.h
2016-12-11 16:54:11 +00:00

221 lines
7.7 KiB
C

/*
* Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/** \addtogroup launchpad-peripherals
* @{
*
* \defgroup launchpad-cc1310-specific CC1310 LaunchPad Peripherals
*
* Defines related to the CC1310 LaunchPad
*
* This file provides connectivity information on LEDs, Buttons, UART and
* other peripherals
*
* This file is not meant to be modified by the user.
* @{
*
* \file
* Header file with definitions related to the I/O connections on the TI
* CC1310 LaunchPad
*
* \note Do not include this file directly. It gets included by contiki-conf
* after all relevant directives have been set.
*/
/*---------------------------------------------------------------------------*/
#ifndef BOARD_H_
#define BOARD_H_
/*---------------------------------------------------------------------------*/
#include "ioc.h"
/*---------------------------------------------------------------------------*/
/**
* \name LED configurations
*
* Those values are not meant to be modified by the user
* @{
*/
/* Some files include leds.h before us, so we need to get rid of defaults in
* leds.h before we provide correct definitions */
#undef LEDS_GREEN
#undef LEDS_YELLOW
#undef LEDS_RED
#undef LEDS_CONF_ALL
#define LEDS_RED 1
#define LEDS_GREEN 2
#define LEDS_YELLOW LEDS_GREEN
#define LEDS_ORANGE LEDS_RED
#define LEDS_CONF_ALL 3
/* Notify various examples that we have LEDs */
#define PLATFORM_HAS_LEDS 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name LED IOID mappings
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_LED_1 IOID_6
#define BOARD_IOID_LED_2 IOID_7
#define BOARD_LED_1 (1 << BOARD_IOID_LED_1)
#define BOARD_LED_2 (1 << BOARD_IOID_LED_2)
#define BOARD_LED_ALL (BOARD_LED_1 | BOARD_LED_2)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name UART IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_UART_RX IOID_2
#define BOARD_IOID_UART_TX IOID_3
#define BOARD_IOID_UART_RTS IOID_18
#define BOARD_IOID_UART_CTS IOID_19
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Button IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_KEY_LEFT IOID_13
#define BOARD_IOID_KEY_RIGHT IOID_14
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief SPI IOID mappings
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_SPI_MOSI IOID_9
#define BOARD_IOID_SPI_MISO IOID_8
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name External flash IOID mapping
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_FLASH_CS IOID_20
#define BOARD_FLASH_CS (1 << BOARD_IOID_FLASH_CS)
#define BOARD_IOID_SPI_CLK_FLASH IOID_10
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief I2C IOID mappings
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_SCL IOID_4
#define BOARD_IOID_SDA IOID_5
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief ROM bootloader configuration
*
* Change SET_CCFG_BL_CONFIG_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select
* which button triggers the bootloader on reset.
*
* The remaining values are not meant to be modified by the user
* @{
*/
#if ROM_BOOTLOADER_ENABLE
#define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE 0xC5
#define SET_CCFG_BL_CONFIG_BL_LEVEL 0x00
#define SET_CCFG_BL_CONFIG_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT
#define SET_CCFG_BL_CONFIG_BL_ENABLE 0xC5
#else
#define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE 0x00
#define SET_CCFG_BL_CONFIG_BL_LEVEL 0x01
#define SET_CCFG_BL_CONFIG_BL_PIN_NUMBER 0xFF
#define SET_CCFG_BL_CONFIG_BL_ENABLE 0xFF
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief Remaining pins
*
* Those values are not meant to be modified by the user
* @{
*/
#define BOARD_IOID_DIO1 IOID_1
#define BOARD_IOID_CS IOID_11
#define BOARD_IOID_TDO IOID_16
#define BOARD_IOID_TDI IOID_17
#define BOARD_IOID_DIO12 IOID_12
#define BOARD_IOID_DIO15 IOID_15
#define BOARD_IOID_DIO21 IOID_21
#define BOARD_IOID_DIO22 IOID_22
#define BOARD_IOID_DIO23 IOID_23
#define BOARD_IOID_DIO24 IOID_24
#define BOARD_IOID_DIO25 IOID_25
#define BOARD_IOID_DIO26 IOID_26
#define BOARD_IOID_DIO27 IOID_27
#define BOARD_IOID_DIO28 IOID_28
#define BOARD_IOID_DIO29 IOID_29
#define BOARD_IOID_DIO30 IOID_30
#define BOARD_UNUSED_PINS { \
BOARD_IOID_DIO1, BOARD_IOID_CS, BOARD_IOID_TDO, BOARD_IOID_TDI, \
BOARD_IOID_DIO12, BOARD_IOID_DIO15, BOARD_IOID_DIO21, BOARD_IOID_DIO22, \
BOARD_IOID_DIO23, BOARD_IOID_DIO24, BOARD_IOID_DIO25, BOARD_IOID_DIO26, \
BOARD_IOID_DIO27, BOARD_IOID_DIO28, BOARD_IOID_DIO29, BOARD_IOID_DIO30, \
IOID_UNUSED \
}
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name Device string used on startup
* @{
*/
#define BOARD_STRING "TI CC1310 LaunchPad"
/** @} */
/*---------------------------------------------------------------------------*/
#endif /* BOARD_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/