138 lines
5.3 KiB
C
138 lines
5.3 KiB
C
/*
|
|
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* Moisture resource
|
|
* \author
|
|
* Harald Pichler <harald@the-develop.net>
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
|
|
#include <string.h>
|
|
#include "rest-engine.h"
|
|
#include "Arduino.h"
|
|
#include "sketch.h"
|
|
|
|
|
|
#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
|
|
#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
|
|
#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
|
|
|
|
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
|
|
{
|
|
// cache the port and bit of the pin in order to speed up the
|
|
// pulse width measuring loop and achieve finer resolution. calling
|
|
// digitalRead() instead yields much coarser resolution.
|
|
uint8_t bit = digitalPinToBitMask(pin);
|
|
uint8_t port = digitalPinToPort(pin);
|
|
uint8_t stateMask = (state ? bit : 0);
|
|
unsigned long width = 0; // keep initialization out of time critical area
|
|
|
|
// convert the timeout from microseconds to a number of times through
|
|
// the initial loop; it takes 16 clock cycles per iteration.
|
|
unsigned long numloops = 0;
|
|
unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
|
|
|
|
// wait for any previous pulse to end
|
|
while ((*portInputRegister(port) & bit) == stateMask)
|
|
if (numloops++ == maxloops)
|
|
return 0;
|
|
// wait for the pulse to start
|
|
while ((*portInputRegister(port) & bit) != stateMask)
|
|
if (numloops++ == maxloops)
|
|
return 0;
|
|
|
|
// wait for the pulse to stop
|
|
while ((*portInputRegister(port) & bit) == stateMask)
|
|
width++;
|
|
|
|
// convert the reading to microseconds. The loop has been determined
|
|
// to be 10 clock cycles long and have about 16 clocks between the edge
|
|
// and the start of the loop. There will be some error introduced by
|
|
// the interrupt handlers.
|
|
return clockCyclesToMicroseconds(width * 10 + 16);
|
|
}
|
|
|
|
|
|
|
|
|
|
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
|
|
|
|
/* A simple getter example. Returns the reading from the sensor with a simple etag */
|
|
RESOURCE(res_distance,
|
|
"title=\"Distance status\";rt=\"Distance\"",
|
|
res_get_handler,
|
|
NULL,
|
|
NULL,
|
|
NULL);
|
|
|
|
static void
|
|
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
|
{
|
|
|
|
unsigned int accept = -1;
|
|
REST.get_header_accept(request, &accept);
|
|
|
|
long duration, distance;
|
|
|
|
digitalWrite(TRIG_PIN, LOW);
|
|
delayMicroseconds(2);
|
|
digitalWrite(TRIG_PIN, HIGH);
|
|
delayMicroseconds(20);
|
|
digitalWrite(TRIG_PIN, LOW);
|
|
|
|
duration = pulseIn(ECHO_PIN, HIGH, 500000);
|
|
|
|
// found this computation in some arduino examples
|
|
//distance = (duration/2) / 29.1;
|
|
// to get millimeters (duration -20) / 3.18 is a good approach
|
|
distance = (duration-20)/3.18;
|
|
|
|
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
|
|
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
|
|
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%ld", distance);
|
|
|
|
REST.set_response_payload(response, buffer, strlen((char *)buffer));
|
|
} else if(accept == REST.type.APPLICATION_JSON) {
|
|
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
|
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'distance':%ld}", distance);
|
|
|
|
REST.set_response_payload(response, buffer, strlen((char *)buffer));
|
|
} else {
|
|
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
|
|
const char *msg = "Supporting content-types text/plain and application/json";
|
|
REST.set_response_payload(response, msg, strlen(msg));
|
|
}
|
|
}
|
|
|