edc7a59091
Compatible with old bootloader. Adds an additional section with a copy of the interrupt vector table to the end of the image. This is needed by the new bootloader and should be ok for the old bootloader. Note that for this to work, everybody needs python installed with the IntelHex python package. On Linux this can be achieved with pip install IntelHex
41 lines
1,021 B
Makefile
41 lines
1,021 B
Makefile
# Set this to the name of your sketch (without extension .pde)
|
|
SKETCH=sketch
|
|
EXE=ota
|
|
|
|
all: $(EXE)
|
|
|
|
CONTIKI=../../..
|
|
|
|
# Contiki IPv6 configuration
|
|
CONTIKI_WITH_IPV6 = 1
|
|
|
|
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
|
|
|
|
PROJECT_SOURCEFILES += res_upload_image.c res_bootloader.c ${SKETCH}.cpp
|
|
|
|
# variable for Makefile.include
|
|
ifneq ($(TARGET), minimal-net)
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=1
|
|
else
|
|
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
|
|
${info INFO: compiling without RPL}
|
|
CFLAGS += -DUIP_CONF_IPV6_RPL=0
|
|
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
|
|
${info INFO: compiling with large buffers}
|
|
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
|
|
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
|
|
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
|
|
endif
|
|
|
|
# linker optimizations
|
|
SMALL=1
|
|
|
|
# REST Engine shall use Erbium CoAP implementation
|
|
APPS += er-coap
|
|
APPS += rest-engine
|
|
APPS += arduino json-resource json #time
|
|
|
|
include $(CONTIKI)/Makefile.include
|
|
include $(CONTIKI)/apps/arduino/Makefile.include
|
|
|
|
AVRDUDE_PORT=/dev/ttyUSB1
|