osd-contiki/cpu/x86/drivers/quarkX1000/eth.c
Michael LeMay 4cdb7ba9b6 x86: Add TSS-based protection domain support
This patch extends the protection domain framework with an additional
plugin to use Task-State Segment (TSS) structures to offload much of
the work of switching protection domains to the CPU.  This can save
space compared to paging, since paging requires two 4KiB page tables
and one 32-byte page table plus one whole-system TSS and an additional
32-byte data structure for each protection domain, whereas the
approach implemented by this patch just requires a 128-byte data
structure for each protection domain.  Only a small number of
protection domains will typically be used, so
n * 128 < 8328 + (n * 32).

For additional information, please refer to cpu/x86/mm/README.md.

GCC 6 is introducing named address spaces for the FS and GS segments
[1].  LLVM Clang also provides address spaces for the FS and GS
segments [2].  This patch also adds support to the multi-segment X86
memory management subsystem for using these features instead of inline
assembly blocks, which enables type checking to detect some address
space mismatches.

[1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html
[2] http://llvm.org/releases/3.3/tools/clang/docs/LanguageExtensions.html#target-specific-extensions
2016-04-22 08:16:39 -07:00

466 lines
16 KiB
C

/*
* Copyright (C) 2015, Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <string.h>
#include <assert.h>
#include <stdio.h>
#include "contiki-net.h"
#include "dma.h"
#include "eth.h"
#include "helpers.h"
#include "syscalls.h"
#include "net/ip/uip.h"
#include "pci.h"
typedef pci_driver_t quarkX1000_eth_driver_t;
/* Refer to Intel Quark SoC X1000 Datasheet, Chapter 15 for more details on
* Ethernet device operation.
*
* This driver puts the Ethernet device into a very simple and space-efficient
* mode of operation. It only allocates a single packet descriptor for each of
* the transmit and receive directions, computes checksums on the CPU, and
* enables store-and-forward mode for both transmit and receive directions.
*/
/* Transmit descriptor */
typedef struct quarkX1000_eth_tx_desc {
/* First word of transmit descriptor */
union {
struct {
/* Only valid in half-duplex mode. */
uint32_t deferred_bit : 1;
uint32_t err_underflow : 1;
uint32_t err_excess_defer : 1;
uint32_t coll_cnt_slot_num : 4;
uint32_t vlan_frm : 1;
uint32_t err_excess_coll : 1;
uint32_t err_late_coll : 1;
uint32_t err_no_carrier : 1;
uint32_t err_carrier_loss : 1;
uint32_t err_ip_payload : 1;
uint32_t err_frm_flushed : 1;
uint32_t err_jabber_tout : 1;
/* OR of all other error bits. */
uint32_t err_summary : 1;
uint32_t err_ip_hdr : 1;
uint32_t tx_timestamp_stat : 1;
uint32_t vlan_ins_ctrl : 2;
uint32_t addr2_chained : 1;
uint32_t tx_end_of_ring : 1;
uint32_t chksum_ins_ctrl : 2;
uint32_t replace_crc : 1;
uint32_t tx_timestamp_en : 1;
uint32_t dis_pad : 1;
uint32_t dis_crc : 1;
uint32_t first_seg_in_frm : 1;
uint32_t last_seg_in_frm : 1;
uint32_t intr_on_complete : 1;
/* When set, descriptor is owned by DMA. */
uint32_t own : 1;
};
uint32_t tdes0;
};
/* Second word of transmit descriptor */
union {
struct {
uint32_t tx_buf1_sz : 13;
uint32_t : 3;
uint32_t tx_buf2_sz : 13;
uint32_t src_addr_ins_ctrl : 3;
};
uint32_t tdes1;
};
/* Pointer to frame data buffer */
uint8_t *buf1_ptr;
/* Unused, since this driver initializes only a single descriptor for each
* direction.
*/
uint8_t *buf2_ptr;
} quarkX1000_eth_tx_desc_t;
/* Transmit descriptor */
typedef struct quarkX1000_eth_rx_desc {
/* First word of receive descriptor */
union {
struct {
uint32_t ext_stat : 1;
uint32_t err_crc : 1;
uint32_t err_dribble_bit : 1;
uint32_t err_rx_mii : 1;
uint32_t err_rx_wdt : 1;
uint32_t frm_type : 1;
uint32_t err_late_coll : 1;
uint32_t giant_frm : 1;
uint32_t last_desc : 1;
uint32_t first_desc : 1;
uint32_t vlan_tag : 1;
uint32_t err_overflow : 1;
uint32_t length_err : 1;
uint32_t s_addr_filt_fail : 1;
uint32_t err_desc : 1;
uint32_t err_summary : 1;
uint32_t frm_len : 14;
uint32_t d_addr_filt_fail : 1;
uint32_t own : 1;
};
uint32_t rdes0;
};
/* Second word of receive descriptor */
union {
struct {
uint32_t rx_buf1_sz : 13;
uint32_t : 1;
uint32_t addr2_chained : 1;
uint32_t rx_end_of_ring : 1;
uint32_t rx_buf2_sz : 13;
uint32_t : 2;
uint32_t dis_int_compl : 1;
};
uint32_t rdes1;
};
/* Pointer to frame data buffer */
uint8_t *buf1_ptr;
/* Unused, since this driver initializes only a single descriptor for each
* direction.
*/
uint8_t *buf2_ptr;
} quarkX1000_eth_rx_desc_t;
/* Driver metadata associated with each Ethernet device */
typedef struct quarkX1000_eth_meta {
/* Transmit descriptor */
volatile quarkX1000_eth_tx_desc_t tx_desc;
/* Transmit DMA packet buffer */
volatile uint8_t tx_buf[ALIGN(UIP_BUFSIZE, 4)];
/* Receive descriptor */
volatile quarkX1000_eth_rx_desc_t rx_desc;
/* Receive DMA packet buffer */
volatile uint8_t rx_buf[ALIGN(UIP_BUFSIZE, 4)];
#if X86_CONF_PROT_DOMAINS == X86_CONF_PROT_DOMAINS__PAGING
/* Domain-defined metadata must fill an even number of pages, since that is
* the minimum granularity of access control supported by paging. However,
* using the "aligned(4096)" attribute causes the alignment of the kernel
* data section to increase, which causes problems when generating UEFI
* binaries, as is described in the linker script. Thus, it is necessary
* to manually pad the structure to fill a page. This only works if the
* sizes of the actual fields of the structure are collectively less than a
* page.
*/
uint8_t pad[MIN_PAGE_SIZE -
(sizeof(quarkX1000_eth_tx_desc_t) +
ALIGN(UIP_BUFSIZE, 4) +
sizeof(quarkX1000_eth_rx_desc_t) +
ALIGN(UIP_BUFSIZE, 4))];
#endif
} __attribute__((packed)) quarkX1000_eth_meta_t;
#define LOG_PFX "quarkX1000_eth: "
#define MMIO_SZ 0x2000
#define MAC_CONF_14_RMII_100M BIT(14)
#define MAC_CONF_11_DUPLEX BIT(11)
#define MAC_CONF_3_TX_EN BIT(3)
#define MAC_CONF_2_RX_EN BIT(2)
#define OP_MODE_25_RX_STORE_N_FORWARD BIT(25)
#define OP_MODE_21_TX_STORE_N_FORWARD BIT(21)
#define OP_MODE_13_START_TX BIT(13)
#define OP_MODE_1_START_RX BIT(1)
#define REG_ADDR_MAC_CONF 0x0000
#define REG_ADDR_MACADDR_HI 0x0040
#define REG_ADDR_MACADDR_LO 0x0044
#define REG_ADDR_TX_POLL_DEMAND 0x1004
#define REG_ADDR_RX_POLL_DEMAND 0x1008
#define REG_ADDR_RX_DESC_LIST 0x100C
#define REG_ADDR_TX_DESC_LIST 0x1010
#define REG_ADDR_DMA_OPERATION 0x1018
PROT_DOMAINS_ALLOC(quarkX1000_eth_driver_t, drv);
static quarkX1000_eth_meta_t ATTR_BSS_DMA meta;
void quarkX1000_eth_setup(uintptr_t meta_phys_base);
/*---------------------------------------------------------------------------*/
SYSCALLS_DEFINE_SINGLETON(quarkX1000_eth_setup, drv, uintptr_t meta_phys_base)
{
uip_eth_addr mac_addr;
uint32_t mac_tmp1, mac_tmp2;
quarkX1000_eth_rx_desc_t rx_desc;
quarkX1000_eth_tx_desc_t tx_desc;
quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *loc_meta =
(quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *)PROT_DOMAINS_META(drv);
prot_domains_enable_mmio();
/* Read the MAC address from the device. */
PCI_MMIO_READL(drv, mac_tmp1, REG_ADDR_MACADDR_HI);
PCI_MMIO_READL(drv, mac_tmp2, REG_ADDR_MACADDR_LO);
prot_domains_disable_mmio();
/* Convert the data read from the device into the format expected by
* Contiki.
*/
mac_addr.addr[5] = (uint8_t)(mac_tmp1 >> 8);
mac_addr.addr[4] = (uint8_t)mac_tmp1;
mac_addr.addr[3] = (uint8_t)(mac_tmp2 >> 24);
mac_addr.addr[2] = (uint8_t)(mac_tmp2 >> 16);
mac_addr.addr[1] = (uint8_t)(mac_tmp2 >> 8);
mac_addr.addr[0] = (uint8_t)mac_tmp2;
printf(LOG_PFX "MAC address = %02x:%02x:%02x:%02x:%02x:%02x.\n",
mac_addr.addr[0],
mac_addr.addr[1],
mac_addr.addr[2],
mac_addr.addr[3],
mac_addr.addr[4],
mac_addr.addr[5]
);
uip_setethaddr(mac_addr);
/* Initialize transmit descriptor. */
tx_desc.tdes0 = 0;
tx_desc.tdes1 = 0;
tx_desc.tx_end_of_ring = 1;
tx_desc.first_seg_in_frm = 1;
tx_desc.last_seg_in_frm = 1;
tx_desc.tx_end_of_ring = 1;
META_WRITEL(loc_meta->tx_desc.tdes0, tx_desc.tdes0);
META_WRITEL(loc_meta->tx_desc.tdes1, tx_desc.tdes1);
META_WRITEL(loc_meta->tx_desc.buf1_ptr,
(uint8_t *)PROT_DOMAINS_META_OFF_TO_PHYS(
(uintptr_t)&loc_meta->tx_buf, meta_phys_base));
META_WRITEL(loc_meta->tx_desc.buf2_ptr, 0);
/* Initialize receive descriptor. */
rx_desc.rdes0 = 0;
rx_desc.rdes1 = 0;
rx_desc.own = 1;
rx_desc.first_desc = 1;
rx_desc.last_desc = 1;
rx_desc.rx_buf1_sz = UIP_BUFSIZE;
rx_desc.rx_end_of_ring = 1;
META_WRITEL(loc_meta->rx_desc.rdes0, rx_desc.rdes0);
META_WRITEL(loc_meta->rx_desc.rdes1, rx_desc.rdes1);
META_WRITEL(loc_meta->rx_desc.buf1_ptr,
(uint8_t *)PROT_DOMAINS_META_OFF_TO_PHYS(
(uintptr_t)&loc_meta->rx_buf, meta_phys_base));
META_WRITEL(loc_meta->rx_desc.buf2_ptr, 0);
prot_domains_enable_mmio();
/* Install transmit and receive descriptors. */
PCI_MMIO_WRITEL(drv, REG_ADDR_RX_DESC_LIST,
PROT_DOMAINS_META_OFF_TO_PHYS(
(uintptr_t)&loc_meta->rx_desc, meta_phys_base));
PCI_MMIO_WRITEL(drv, REG_ADDR_TX_DESC_LIST,
PROT_DOMAINS_META_OFF_TO_PHYS(
(uintptr_t)&loc_meta->tx_desc, meta_phys_base));
PCI_MMIO_WRITEL(drv, REG_ADDR_MAC_CONF,
/* Set the RMII speed to 100Mbps */
MAC_CONF_14_RMII_100M |
/* Enable full-duplex mode */
MAC_CONF_11_DUPLEX |
/* Enable transmitter */
MAC_CONF_3_TX_EN |
/* Enable receiver */
MAC_CONF_2_RX_EN);
PCI_MMIO_WRITEL(drv, REG_ADDR_DMA_OPERATION,
/* Enable receive store-and-forward mode for simplicity. */
OP_MODE_25_RX_STORE_N_FORWARD |
/* Enable transmit store-and-forward mode for simplicity. */
OP_MODE_21_TX_STORE_N_FORWARD |
/* Place the transmitter state machine in the Running
state. */
OP_MODE_13_START_TX |
/* Place the receiver state machine in the Running state. */
OP_MODE_1_START_RX);
prot_domains_disable_mmio();
printf(LOG_PFX "Enabled 100M full-duplex mode.\n");
}
/*---------------------------------------------------------------------------*/
/**
* \brief Poll for a received Ethernet frame.
* \param frame_len Will be set to the size of the received Ethernet frame or
* zero if no frame is available.
*
* If a frame is received, this procedure copies it into the
* global uip_buf buffer.
*/
SYSCALLS_DEFINE_SINGLETON(quarkX1000_eth_poll, drv, uint16_t * frame_len)
{
uint16_t *loc_frame_len;
uint16_t frm_len = 0;
quarkX1000_eth_rx_desc_t tmp_desc;
quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *loc_meta =
(quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *)PROT_DOMAINS_META(drv);
PROT_DOMAINS_VALIDATE_PTR(loc_frame_len, frame_len, sizeof(*frame_len));
META_READL(tmp_desc.rdes0, loc_meta->rx_desc.rdes0);
/* Check whether the RX descriptor is still owned by the device. If not,
* process the received frame or an error that may have occurred.
*/
if(tmp_desc.own == 0) {
META_READL(tmp_desc.rdes1, loc_meta->rx_desc.rdes1);
if(tmp_desc.err_summary) {
fprintf(stderr,
LOG_PFX "Error receiving frame: RDES0 = %08x, RDES1 = %08x.\n",
tmp_desc.rdes0, tmp_desc.rdes1);
assert(0);
}
frm_len = tmp_desc.frm_len;
assert(frm_len <= UIP_BUFSIZE);
MEMCPY_FROM_META(uip_buf, loc_meta->rx_buf, frm_len);
/* Return ownership of the RX descriptor to the device. */
tmp_desc.own = 1;
META_WRITEL(loc_meta->rx_desc.rdes0, tmp_desc.rdes0);
prot_domains_enable_mmio();
/* Request that the device check for an available RX descriptor, since
* ownership of the descriptor was just transferred to the device.
*/
PCI_MMIO_WRITEL(drv, REG_ADDR_RX_POLL_DEMAND, 1);
prot_domains_disable_mmio();
}
*loc_frame_len = frm_len;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Transmit the current Ethernet frame.
*
* This procedure will block indefinitely until the Ethernet device is
* ready to accept a new outgoing frame. It then copies the current
* Ethernet frame from the global uip_buf buffer to the device DMA
* buffer and signals to the device that a new frame is available to be
* transmitted.
*/
SYSCALLS_DEFINE_SINGLETON(quarkX1000_eth_send, drv)
{
quarkX1000_eth_tx_desc_t tmp_desc;
quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *loc_meta =
(quarkX1000_eth_meta_t ATTR_META_ADDR_SPACE *)PROT_DOMAINS_META(drv);
/* Wait until the TX descriptor is no longer owned by the device. */
do {
META_READL(tmp_desc.tdes0, loc_meta->tx_desc.tdes0);
} while(tmp_desc.own == 1);
META_READL(tmp_desc.tdes1, loc_meta->tx_desc.tdes1);
/* Check whether an error occurred transmitting the previous frame. */
if(tmp_desc.err_summary) {
fprintf(stderr,
LOG_PFX "Error transmitting frame: TDES0 = %08x, TDES1 = %08x.\n",
tmp_desc.tdes0, tmp_desc.tdes1);
assert(0);
}
/* Transmit the next frame. */
assert(uip_len <= UIP_BUFSIZE);
MEMCPY_TO_META(loc_meta->tx_buf, uip_buf, uip_len);
tmp_desc.tx_buf1_sz = uip_len;
META_WRITEL(loc_meta->tx_desc.tdes1, tmp_desc.tdes1);
tmp_desc.own = 1;
META_WRITEL(loc_meta->tx_desc.tdes0, tmp_desc.tdes0);
prot_domains_enable_mmio();
/* Request that the device check for an available TX descriptor, since
* ownership of the descriptor was just transferred to the device.
*/
PCI_MMIO_WRITEL(drv, REG_ADDR_TX_POLL_DEMAND, 1);
prot_domains_disable_mmio();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Initialize the first Quark X1000 Ethernet MAC.
*
* This procedure assumes that an MMIO range for the device was
* previously assigned, e.g. by firmware.
*/
void
quarkX1000_eth_init(void)
{
pci_config_addr_t pci_addr = { .raw = 0 };
/* PCI address from section 15.4 of Intel Quark SoC X1000 Datasheet. */
pci_addr.dev = 20;
pci_addr.func = 6;
/* Activate MMIO and DMA access. */
pci_command_enable(pci_addr, PCI_CMD_2_BUS_MST_EN | PCI_CMD_1_MEM_SPACE_EN);
printf(LOG_PFX "Activated MMIO and DMA access.\n");
pci_addr.reg_off = PCI_CONFIG_REG_BAR0;
PROT_DOMAINS_INIT_ID(drv);
/* Configure the device MMIO range and initialize the driver structure. */
pci_init(&drv, pci_addr, MMIO_SZ,
(uintptr_t)&meta, sizeof(quarkX1000_eth_meta_t));
SYSCALLS_INIT(quarkX1000_eth_setup);
SYSCALLS_AUTHZ(quarkX1000_eth_setup, drv);
SYSCALLS_INIT(quarkX1000_eth_poll);
SYSCALLS_AUTHZ(quarkX1000_eth_poll, drv);
SYSCALLS_INIT(quarkX1000_eth_send);
SYSCALLS_AUTHZ(quarkX1000_eth_send, drv);
quarkX1000_eth_setup(prot_domains_lookup_meta_phys_base(&drv));
}
/*---------------------------------------------------------------------------*/