osd-contiki/core/net/rpl/rpl.h

277 lines
9 KiB
C

/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* Author: Joakim Eriksson, Nicolas Tsiftes
*
* $Id: rpl.h,v 1.2 2010/04/30 15:03:55 nvt-se Exp $
*/
#ifndef RPL_H
#define RPL_H
#include "lib/list.h"
#include "net/uip.h"
#include "sys/clock.h"
#include "net/rime/ctimer.h"
#include "net/uip-ds6.h"
/* set to 1 for some statistics on trickle / DIO */
#ifndef RPL_CONF_STATS
#define RPL_CONF_STATS 1
#endif /* RPL_CONF_STATS */
/* The RPL Codes for the message types */
#define RPL_CODE_DIS 1 /* DIS message */
#define RPL_CODE_DIO 2 /* DIO message */
#define RPL_CODE_DAO 4 /* DAO message */
/* RPL DIO suboption types */
#define RPL_DIO_SUBOPT_PAD1 0 /* Pad1 */
#define RPL_DIO_SUBOPT_PADN 1 /* PadN */
#define RPL_DIO_SUBOPT_DAG_MC 2 /* DAG metric container */
#define RPL_DIO_SUBOPT_DEST_PREFIX 3 /* Destination prefix */
#define RPL_DIO_SUBOPT_DAG_CONF 4 /* DAG configuration */
#define RPL_DIO_SUBOPT_OCP 5 /* OCP */
/*---------------------------------------------------------------------------*/
/* Default values for RPL constants and variables. */
#define DEFAULT_DAO_LATENCY (CLOCK_SECOND * 10)
/* Special value indicating immediate removal. */
#define ZERO_LIFETIME 0
/* Special value indicating that a DAO should not expire. */
#define INFINITE_LIFETIME 0xffffffff
/* Default route lifetime in seconds. */
#define DEFAULT_ROUTE_LIFETIME INFINITE_LIFETIME
/* Rank of a node outside the LLN. */
#define BASE_RANK 0
/* Rank of a root node. */
#define ROOT_RANK 1
#define INFINITE_RANK 0xffff
#define RPL_DEFAULT_INSTANCE 0
#define RPL_ANY_INSTANCE -1
#define RPL_DEFAULT_OCP 0
/* TODO: pick these from OCP later? */
#define DEFAULT_MAX_RANKINC 16
#define DEFAULT_MIN_HOPRANKINC 4
/* Represents 2^n ms. */
#define DEFAULT_DIO_INTERVAL_MIN 12
/* Maximum amount of timer doublings. */
#define DEFAULT_DIO_INTERVAL_DOUBLINGS 8
/* Desired DIO redundancy. */
#define DEFAULT_DIO_REDUNDANCY 1
/* Expire DAOs from neighbors that do not respond in this time. (seconds) */
#define DAO_EXPIRATION_TIMEOUT 60
/*---------------------------------------------------------------------------*/
#define RPL_ROUTE_FROM_INTERNAL 0
#define RPL_ROUTE_FROM_UNICAST_DAO 1
#define RPL_ROUTE_FROM_MULTICAST_DAO 2
#define RPL_ROUTE_FROM_DIO 3
/* DAG Metric Container Object Types, to be confirmed by IANA. */
#define RPL_DAG_MC_NSA 1
#define RPL_DAG_MC_NE 2
#define RPL_DAG_MC_HC 3
#define RPL_DAG_MC_THROUGHPUT 4
#define RPL_DAG_MC_LATENCY 5
#define RPL_DAG_MC_LQL 6
#define RPL_DAG_MC_ETX 7
#define RPL_DAG_MC_LC 8
/* DIS related */
#define RPL_DIS_SEND 1
#define RPL_DIS_INTERVAL 60
#define RPL_DIS_START_DELAY 5
typedef uint16_t rpl_rank_t;
typedef uint16_t rpl_ocp_t;
struct rpl_neighbor {
struct rpl_neighbor *next;
void *dag;
uip_ipaddr_t addr;
rpl_rank_t rank;
uint8_t local_confidence;
};
typedef struct rpl_neighbor rpl_neighbor_t;
struct rpl_of {
rpl_neighbor_t *(*best_parent)(rpl_neighbor_t *, rpl_neighbor_t *);
rpl_rank_t (*increment_rank)(rpl_rank_t, rpl_neighbor_t *);
rpl_ocp_t ocp;
};
typedef struct rpl_of rpl_of_t;
/* Logical representation of a DAG Information Object (DIO.) */
struct rpl_dio {
uip_ipaddr_t dag_id;
rpl_ocp_t ocp;
rpl_rank_t dag_rank;
uint8_t grounded;
uint8_t dst_adv_trigger;
uint8_t dst_adv_supported;
uint8_t preference;
uint8_t sequence_number;
uint8_t instance_id;
uint8_t dtsn;
uint8_t dag_intdoubl;
uint8_t dag_intmin;
uint8_t dag_redund;
uint8_t dag_max_rankinc;
uint8_t dag_min_hoprankinc;
};
typedef struct rpl_dio rpl_dio_t;
struct rpl_prefix {
uip_ipaddr_t prefix;
uint32_t lifetime;
uint8_t length;
uint8_t preference;
};
typedef struct rpl_prefix rpl_prefix_t;
/* Directed Acyclic Graph */
struct rpl_dag {
/* DAG configuration */
rpl_of_t *of;
uip_ipaddr_t dag_id;
/* this is the current def-router that is set - used for routing "upwards" */
uip_ds6_defrt_t *def_route;
rpl_rank_t rank;
rpl_rank_t min_rank; /* should be nullified per dodag iteration! */
uint8_t dtsn;
uint8_t instance_id;
uint8_t sequence_number;
uint8_t preference;
uint8_t grounded;
uint8_t dio_intdoubl;
uint8_t dio_intmin;
uint8_t dio_redundancy;
uint8_t max_rankinc;
uint8_t min_hoprankinc;
uint8_t used;
/* live data for the DAG */
uint8_t joined;
uint8_t dio_intcurrent;
uint8_t dio_send; /* for keeping track of which mode the timer is in */
uint8_t dio_counter;
#if RPL_CONF_STATS
uint16_t dio_totint;
uint16_t dio_totsend;
uint16_t dio_totrecv;
#endif /* RPL_CONF_STATS */
uint16_t dio_next_delay; /* delay for completion of dio interval */
struct ctimer dio_timer;
struct ctimer dao_timer;
rpl_neighbor_t *best_parent;
void *neighbor_list;
list_t neighbors;
};
typedef struct rpl_dag rpl_dag_t;
/*---------------------------------------------------------------------------*/
/* RPL macro functions. */
#define RPL_PARENT_COUNT(dag) \
list_length((dag)->neighbors)
#define RPL_NEIGHBOR_IS_CHILD(dag, neighbor) \
((neighbor)->rank > (dag)->rank)
#define RPL_NEIGHBOR_IS_SIBLING(dag, neighbor) \
((neighbor)->rank == (dag)->rank)
#define RPL_NEIGHBOR_IS_PARENT(dag, neighbor) \
((neighbor)->rank < (dag)->rank)
/*---------------------------------------------------------------------------*/
/* ICMPv6 functions for RPL. */
void dis_output(uip_ipaddr_t *addr);
void dio_output(rpl_dag_t *, uip_ipaddr_t *uc_addr);
void dao_output(rpl_neighbor_t *, uint32_t lifetime);
void uip_rpl_input(void);
/* RPL logic functions. */
int rpl_set_root(uip_ipaddr_t *);
int rpl_repair_dag(rpl_dag_t *dag);
int rpl_set_default_route(rpl_dag_t *dag, uip_ipaddr_t *from);
void rpl_process_dio(uip_ipaddr_t *, rpl_dio_t *);
/* DAG allocation and deallocation. */
rpl_dag_t *rpl_alloc_dag(void);
void rpl_free_dag(rpl_dag_t *);
/* DAG parent management function. */
rpl_neighbor_t *rpl_add_neighbor(rpl_dag_t *, uip_ipaddr_t *);
rpl_neighbor_t *rpl_find_neighbor(rpl_dag_t *, uip_ipaddr_t *);
int rpl_remove_neighbor(rpl_dag_t *, rpl_neighbor_t *);
rpl_neighbor_t *rpl_first_parent(rpl_dag_t *dag);
rpl_neighbor_t *rpl_find_best_parent(rpl_dag_t *dag);
void rpl_join_dag(rpl_dag_t *);
rpl_dag_t *rpl_get_dag(int instance_id);
rpl_dag_t *rpl_find_dag(unsigned char aucIndex);
/* RPL routing table functions. */
uip_ds6_route_t *rpl_add_route(rpl_dag_t *dag, uip_ipaddr_t *prefix,
int prefix_len, uip_ipaddr_t *next_hop);
void rpl_purge_routes(void);
/* Objective function. */
rpl_of_t *rpl_find_of(rpl_ocp_t);
/* Timer functions. */
void rpl_schedule_dao(rpl_dag_t *);
void rpl_reset_dio_timer(rpl_dag_t *, uint8_t);
void rpl_reset_periodic_timer(void);
/* Route poisoning. */
void rpl_poison_routes(rpl_dag_t *, rpl_neighbor_t *);
/*---------------------------------------------------------------------------*/
void rpl_init(void);
#endif /* RPL_H */