osd-contiki/cpu/cc26xx-cc13xx/rf-core/dot-15-4g.h

129 lines
5.8 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup rf-core
* @{
*
* \defgroup rf-core-15-4g-modes IEEE 802.15.4g Frequency Bands and Modes
*
* @{
*
* \file
* Header file with descriptors for the various modes of operation defined in
* IEEE 802.15.4g
*/
/*---------------------------------------------------------------------------*/
#ifndef DOT_15_4G_H_
#define DOT_15_4G_H_
/*---------------------------------------------------------------------------*/
#include "contiki-conf.h"
#include "driverlib/rf_mailbox.h"
/*---------------------------------------------------------------------------*/
/* IEEE 802.15.4g frequency band identifiers (Table 68f) */
#define DOT_15_4G_FREQUENCY_BAND_169 0 /* 169.400169.475 (Europe) - 169 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_450 1 /* 450470 (US FCC Part 22/90) - 450 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_470 2 /* 470510 (China) - 470 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_780 3 /* 779787 (China) - 780 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_863 4 /* 863870 (Europe) - 863 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_896 5 /* 896901 (US FCC Part 90) - 896 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_901 6 /* 901902 (US FCC Part 24) - 901 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_915 7 /* 902928 (US) - 915 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_917 8 /* 917923.5 (Korea) - 917 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_920 9 /* 920928 (Japan) - 920 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_928 10 /* 928960 (US, non-contiguous) - 928 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_950 11 /* 950958 (Japan) - 950 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_1427 12 /* 14271518 (US and Canada, non-contiguous) - 1427 MHz band */
#define DOT_15_4G_FREQUENCY_BAND_2450 13 /* 24002483.5 2450 MHz band */
/*---------------------------------------------------------------------------*/
/* Default band selection to band 4 - 863MHz */
#ifdef DOT_15_4G_CONF_FREQUENCY_BAND_ID
#define DOT_15_4G_FREQUENCY_BAND_ID DOT_15_4G_CONF_FREQUENCY_BAND_ID
#else
#define DOT_15_4G_FREQUENCY_BAND_ID DOT_15_4G_FREQUENCY_BAND_863
#endif
/*---------------------------------------------------------------------------*/
/*
* Channel count, spacing and other params relating to the selected band. We
* currently only support some of the bands defined in .15.4g and for those
* bands we only support operating mode #1 (Table 134).
*
* DOT_15_4G_CHAN0_FREQUENCY is specified here in KHz
*/
#if DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_470
#define DOT_15_4G_CHANNEL_MAX 198
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 470200
#define PROP_MODE_CONF_LO_DIVIDER 0x0A
#define SMARTRF_SETTINGS_CONF_BAND_OVERRIDES HW32_ARRAY_OVERRIDE(0x405C,1), \
(uint32_t)0x18000280,
#elif DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_780
#define DOT_15_4G_CHANNEL_MAX 38
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 779200
#define PROP_MODE_CONF_LO_DIVIDER 0x06
#elif DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_863
#define DOT_15_4G_CHANNEL_MAX 33
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 863125
#define PROP_MODE_CONF_LO_DIVIDER 0x05
#elif DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_915
#define DOT_15_4G_CHANNEL_MAX 128
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 902200
#define PROP_MODE_CONF_LO_DIVIDER 0x05
#elif DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_920
#define DOT_15_4G_CHANNEL_MAX 37
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 920600
#define PROP_MODE_CONF_LO_DIVIDER 0x05
#elif DOT_15_4G_FREQUENCY_BAND_ID==DOT_15_4G_FREQUENCY_BAND_950
#define DOT_15_4G_CHANNEL_MAX 32
#define DOT_15_4G_CHANNEL_SPACING 200
#define DOT_15_4G_CHAN0_FREQUENCY 951000
#define PROP_MODE_CONF_LO_DIVIDER 0x05
#else
#error The selected frequency band is not supported
#endif
/*---------------------------------------------------------------------------*/
#endif /* DOT_15_4G_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/