osd-contiki/cpu/cc2538/ieee-addr.h

109 lines
3.7 KiB
C

/*
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538
* @{
*
* \defgroup cc2538-ieee-addr cc2538 IEEE Address Control
*
* Driver for the retrieval of an IEEE address from flash
* @{
*
* \file
* Header file with register and macro declarations for the cc2538 IEEE address
* driver
*/
#ifndef IEEE_ADDR_H_
#define IEEE_ADDR_H_
#include "contiki-conf.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
/**
* \name TI OUI
* @{
*/
#define IEEE_ADDR_OUI_TI { 0x00, 0x12, 0x4B } /**< TI OUI */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name IEEE address locations
*
* The address of the secondary location can be configured by the platform
* or example
*
* @{
*/
#define IEEE_ADDR_LOCATION_PRIMARY 0x00280028 /**< Primary IEEE address location */
#ifdef IEEE_ADDR_CONF_LOCATION_SECONDARY
#define IEEE_ADDR_LOCATION_SECONDARY IEEE_ADDR_CONF_LOCATION_SECONDARY
#else
#define IEEE_ADDR_LOCATION_SECONDARY 0x0027FFCC /**< Secondary IEEE address location */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \brief Select which address location to use
* @{
*/
#if IEEE_ADDR_CONF_USE_SECONDARY_LOCATION
#define IEEE_ADDR_LOCATION IEEE_ADDR_LOCATION_SECONDARY
#else
#define IEEE_ADDR_LOCATION IEEE_ADDR_LOCATION_PRIMARY
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/*
* \brief Copy the node's IEEE address to a destination memory area
* \param dst A pointer to the destination area where the IEEE address is to be
* written
* \param len The number of bytes to write to destination area
*
* The address will be read from an InfoPage location or a hard-coded address
* will be used, depending on the value of configuration parameter
* IEEE_ADDR_CONF_HARDCODED
*
* This function will copy \e len LS bytes
*
* The destination address will be populated with dst[0] holding the MSB and
* dst[len - 1] holding the LSB
*/
void ieee_addr_cpy_to(uint8_t *dst, uint8_t len);
#endif /* IEEE_ADDR_H_ */
/**
* @}
* @}
*/